Availability
Showing In Stock Items. Show All 24 Items.
Install your front spoiler correctly with OER's front spoiler installation hardware sets! These sets include the screws needed for proper front spoiler installation.
( 4 )
$9.99
OER front spoiler mounting brackets are exact reproductions of the factory originals. These bracket sets include all of the necessary brackets to attach your front spoiler correctly.
( 5 )
$14.99
—
$15.99
OER has the hardware that you need when replacing or adding a rear spoiler on your ride. These sets include all of the correct hardware that you need to install an OER reproduction spoiler.
( 1 )
$21.79
Goodmark offers a variety of restoration parts and accessories for classic vehicles, including rear spoiler hardware kits. These replacement components were original equipment on several late-1960s era Chevy Camaros. The hardware is machined to factory specs to ensure proper fitment and a secure hold.
( 1 )
$5.99
When it comes to mounting your spoiler, JOES Racing Products has the components you need for a successful installation. These spoiler support washers work great with your JOES spoiler supports, or anywhere a wide aluminum washer is needed to spread out load.
Not Yet Reviewed
$23.95
JOES Racing Products Micro Sprint wing trees are made from 4130 chromoly tubing and E-coated to prevent rusting. They are supplied with 5/16 in. heims and an aluminum tapered spacer to fits most chassis and wings. Measurements and specs: * Maximum 4 in. height adjustment—12 in. minimum height, 16 in. maximum height from rod end hole to wing mount hole * Duel holes for 1/2 in. incremental adjustments * Measures 23 1/4 in. between top wing mounting spuds * Chassis mounting end measures 25 in. from outside to outside
Not Yet Reviewed
$119.95
Secure your rear spoiler with Allstar Performance spoiler brackets. These aluminum brackets rivet directly to the rear spoiler and bolt to the side supports. They have a curved slot that allows for quick spoiler adjustment. Allstar Performance spoiler brackets are sold flat and require a 90 degree bend for left or right hand use. They are offered in two heights to suit your application.
Not Yet Reviewed
$16.49
—
$17.69
Simplify the plumbing of KSE Gen2 steering gear and wing cylinder with Allstar Performance Sprint car hydraulic wing cylinder line kits. They feature strong, lightweight, heat-resistant, braided stainless steel lines. Allstar Sprint car wing line kits contain: * Two #4 slider lines -- 22 in. and 36 in. lengths * One #4 pressure line -- 18 in. length * One #4 return line -- 18 in. length * Four 45-degree 4AN to 1/8 in. NPT aluminum valve fittings * Two 90-degree aluminum 4AN to 1/8 in. NPT cylinder fittings * Two high-flow -3 ORB to 4AN fittings
Not Yet Reviewed
$124.99
Champ Pans spoiler back braces are designed for use with various styles of spoilers. These aluminum braces feature a natural finish and are available in several lengths to properly fit your application. Whether it's a new build, repair, or replacement—Champ Pans spoiler back braces help reinforce your spoiler and keep it in proper working condition.
Not Yet Reviewed
$17.33
—
$21.13
Adjust your Sprint Car wings with hydraulic wing cylinders from Allstar Performance. They feature a lightweight aluminum body, which houses a steel piston and pushrod assembly. They are available in two lengths. Position your wing for optimum performance with Allstar hydraulic wing cylinders.
Not Yet Reviewed
$82.99
—
$87.99
Clearance
The Unplugged Performance Ascension-R rear wing has been developed in CFD for maximum rear downforce in a tasteful and Model 3 specific design. Attach the wing to your trunk with these base stand brackets. Sold in pairs, they're crafted from carbon fiber to complement your beautiful Tesla.
Not Yet Reviewed
$794.99
$699.50
Dominator Sprint Car wing caps are protective edge covers for your car's nose and top wings. These high-impact plastic caps help to prevent rocks and dirt from damaging your aerodynamic "spoiler" components. The caps have the high-end look of carbon fiber, and are available individually for the nose and top wing—or in complete sets. Order the sizes needed for your vehicle application.
Not Yet Reviewed
$39.99
—
$59.99
Scott Drake rear spoiler mounting hardware is what you need for an easy and effective installation. High-quality zinc bases made from their own tooling, high-quality EPDM rubber pads (another Scott Drake exclusive), along with stainless steel and zinc plated hardware complete these kits—so you can finish mounting your rear spoiler for a high performance look! These kits are available in mount or bracket style. Order the model recommended for your vehicle.
Not Yet Reviewed
$82.85
Improve the appearance and aerodynamics of your high wing equipped Chevrolet Corvette C8 with the addition of GT Styling wickerbills. Designed specifically for the OEM high wing, they're machine cut from aluminum and roll formed. No cutting or drilling is required to install. Additional details: * Mount with 3M double-side acrylic tape * Low-gloss black finish to complement Carbon Flash Metallic painted and exposed carbon weave finish high wings * 38mm, tapered, measured from bottom of wing * Set of 2 wickerbills * Does not include OEM high wing
Not Yet Reviewed
$128.35
Protect your wings with Allstar Performance Sprint wing caps. Rocks and debris can damage your Sprint Car wings and lessen their performance. These protective caps are available in plastic or carbon fiber--both with a carbon fiber look. Guard the leading edge of your top and nose wings from performance-robbing dents and holes with Allstar Sprint wing caps.
Not Yet Reviewed
$52.99
—
$108.99
Allstar Performance top wing trees are designed with an "X" pattern for lateral and horizontal strength. Available in 16 in. and 18 in. tall versions, each tree features 4130 chromoly 3/4 in. x .060 in. tube construction with a plated or black finish. They will extend up to 6 in. with adjustment holes located at 1 in. increments. Allstar 16 in. trees are ideal for X-wedge cars to keep the back of the top wing lower while providing optimal top wing tilt at high-speed tracks. Select the height and finish preferred for your Sprint car.
Not Yet Reviewed
$98.99
Allstar manual wing adjusters are for sprint car top wings when rules do not permit the use of hydraulic cylinders. The aluminum sliders include 3/8 in.-24 steel rod ends and are adjustable from 20 in. to 32 in. center-to-center in 1 in. increments with included 1/4 in. locking pin. Allstar manual wing adjusters weigh less than 1 lb.
Not Yet Reviewed
$71.99
Allstar Performance Aero front nose wing posts are made from strong steel and designed with an aerodynamic shape. Available for the RH or LH side, match them with the correct clamp-on style angled aluminum wing mounts (sold separately) that fasten around 1 1/2 in. torsion bar tubes to provide adjustability to front wing posts.
Not Yet Reviewed
$53.99
On Sale
Drake Mustang rear diffuser blade kits are easy installs for dramatic styling to boost your Mustang's performance aesthetic. Designed to add to Drake's rear diffuser, these blade kits provide the perfect upfit to accentuate the S550s attitude with an OE-style fit and finish. They are made from lightweight, blow-molded ABS finished in a satin black paint. In addition, the unique bracket design will prevent blade alignment issues common to these types of items.
Not Yet Reviewed
$120.95
$66.95
JOES Racing Products micro sprint roller wing posts are constructed from CNC aluminum with rollers and stainless post. One of most distinguishing features on a mini sprint, as well as the larger sprint car's is its wing. These roller posts are designed to allow the top wing on a sprint car to move back and forth smoothly without binding and will put less load on the wing slider.
Not Yet Reviewed
$36.95
JOES Racing Products Jr. Sprint wing trees are made from 4130 chromoly tubing and E-coated to prevent rusting. They're supplied with 5/16 in. heims (articulating joints similar to swiveling shock rod ends) and an aluminum tapered spacer to fit most chassis and wings. They feature dual holes for 1/2 in. incremental adjustments, with a maximum 4 in. height adjustment. These wing trees measure 19 1/8 in. between top wing mounting spuds, and the chassis mounting end measures 20 1/2 in. from outside to outside. When only the absolute best racing parts will do—order a JOES Racing Products Jr. Sprint wing tree for your next wing mounting.
Not Yet Reviewed
$114.95
Fathouse Performance GT500 CFTP wing risers will give your vehicle a more aggressive without looking over done. They are designed to improve the aerodynamics of your vehicle, which makes them a great upgrade for S550's equipped with a GT500 carbon fiber Track Package wing track-ready looks. By raising the factory CFTP wing on your vehicle by 2 in. higher than the factory mounts and putting the wing in a more direct path of air, these wing risers also provide better downforce and stability at high speeds. Crafted from 6061 billet aluminum material and wrapped with a corrosion-resistant powdercoated finish to provide long-lasting performance and a sleek appearance, the Fathouse wing risers are both durable and lightweight. Best of all, these wing risers are a direct bolt-in upgrade that's easy to install; no drilling or mods required. Product features and specifications: * Engineered for all 2020-2022 Ford Mustang GT500 models with carbon fiber Track Pack Spoiler * Wing risers are designed with application-and-vehicle-specific properties for a perfect fit * Made of 6061 billet aluminum * Easy bolt-in installation * Raises your factory CFTP wing by 2 inches (6.25 in. overall height) * Protective powdercoated finish * Works with OEM carbon fiber Track Pack Wing * Installation is mod-free, and drill-less, making it a straightforward upgrade for your vehicle
Not Yet Reviewed
$799.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
