Availability
Showing In Stock Items. Show All 11 Items.
BendPak's RJ6W is a 6,000-lb. capacity rolling bridge jack specifically designed for use with a full-sized scissor lift or four-post lift. The RJ6W rolling lift bridge jacks lift up to 6,000 lbs. for full wheel service capability and provide the ability and added versatility to raise the wheels off the runways of your car lift. The RJ6W rolling bridge comes standard with easy-roll wheels that fit onto the runway channels on standard four-post lift models and provides effortless gliding along the runways for easy positioning and adjustability. BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Durable rubber contact pads come standard with every rolling bridge jack. These pads adjust to engage the frame of your vehicle directly at the manufacturer-recommended lift point. Frame cradle pads (sold separately) are necessary for wide-bodied frames (e.g., trucks, SUVs). Additional product features and specs: * Stackable adapters maximize the arm reach on BendPak four-post rolling bridge jacks to accommodate virtually every vehicle on the market, so it's just a matter of knowing the weight of your vehicle and selecting a jack(s) with an appropriate lift capacity * High-pressure hydraulic power unit welded to the side of each four-post rolling bridge jack—commercial-grade air hydraulic pump requires 125 psi and 10-20 cfm and is activated when you press a convenient foot pedal attached to the unit—in seconds flat your vehicle will be lifted to the desired height! * Three lock levels—each four-post rolling bridge jack can be raised to three different heights, so whatever your needs are, you can fine-tune the height of your jack to meet them—the locks engage automatically as the jack scissor arms raise, and they release simultaneously when as the arms are lowered * Optional air-line kit available (sold separately) * Optional frame cradle pads are necessary for many wide-bodied frames (e.g., trucks, SUVs) and are sold separately
Not Yet Reviewed
$2,475.00
Tuxedo scissor-style rolling jacks feature a low-profile design, powdercoated finish, and smooth sliding operation. Designed with an adjustable width for compatibility with most vehicle lifts, their spring-loaded rollers provide positive jack rail contact. The hand pump means no air is needed, and the three safety lock positions help hold everything in place. Two pairs of extensions are included (1 1/2 in. and 5 in.), and their 4,500 lbs. capacity makes them versatile enough for most cars and some heavy-duty pickup trucks. When a run-of-the-mill jack isn't going to get the job done, get your vehicle lift components from a company known for their commercial-grade reliability and toughness by ordering Tuxedo rolling jacks. Product specifications include: * Lift height – 3.75 in. to 11.00 in. * Lift height with 1.50 in. extensions – 5.25 in. to 12.50 in. * Lift height with 5.00 in. extensions – 8.75 in. to 16.00 in. * Arm extension – 34.25 in. to 57.48 in. * Base adjustability – 33.90 in. to 49.60 in. * Pad height above runway – 3.75 in. * Net weight – 363 lbs.
Not Yet Reviewed
$2,052.99
iDEAL Equipment rolling air jacks are high-quality, scissor-style rolling bridge jacks made to engage the automotive frame by pneumatic/hydraulic operation. Designed for easy mounting on most 4-post or scissor lift jack rails, they lift either the front or rear wheels off the runways, providing easier access for servicing brakes, suspension, tire repairs or general maintenance jobs without any obstruction by the wheels. iDEAL Equipment rolling air jacks have an exclusive universal roller body bracket assembly which fits most commercial 4-post or scissor lifts with integrated jack rails between the runways and is available in two styles, high-mount for low position jack rails or low-mount for medium to high-position jack rails. Features and benefits: * 7,000 lbs. capacity * High-quality, commercial grade * Adjustable height roller body assemblies * Dual spring-loaded roller body operation with precision roller bearing guide wheel * Adjustable width telescoping and locking support arms * Air or hydraulic operation * Two locking height positions * Rubber height adapters, set of two each * Durable powdercoat finish
Not Yet Reviewed
$2,199.99
—
$2,272.99
Tuxedo scissor-style sliding jacks feature a low-profile design, powdercoated finish, and smooth sliding operation. Designed with an adjustable width for compatibility with most vehicle lifts, their rollers provide positive jack rail contact. The hand pump means no air is needed, and the three safety lock positions help hold everything in place. Two pairs of extensions are included (1 1/2 in. and 5 in.), and their 3,500 lbs. capacity makes them versatile enough for most cars and some light-duty pickup trucks. When a run-of-the-mill jack isn't going to get the job done, get your vehicle lift components from a company known for their commercial-grade reliability and toughness by ordering Tuxedo sliding jacks. Product specifications include: * Lift height – 3.50 in. to 11.40 in. * Lift height with 1.50 in. extensions – 5.00 in. to 12.90 in. * Lift height with 5.00 in. extensions – 8.50 in. to 16.40 in. * Arm extension – 33.90 in. to 59.80 in. * Base adjustability – 30.90 in. to 45.70 in. * Pad height above runway – 3.50 in. * Net weight – 307 lbs.
Not Yet Reviewed
$1,699.99
BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)
Not Yet Reviewed
$4,495.00
The powerful BendPak RBK18000 rolling bridge jacks are made for use with your HD-35 4-post series lift. Sometimes a vehicle's center of gravity isn't in the exact middle of the vehicle. While the 18,000-lb. capacity RBJ18000 jack is capable of handling the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial drivers have significantly offset centers of gravity. Therefore, it's extremely important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of this RBJ18000 rolling bridge jack will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift Series. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you're raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat. Additional product features: * 18,000-lb. lifting capacity * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more, with three lock level positions on the jack, your ultimate working height is much more versatile * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,395.00
BendPak's RBJ25000 rolling bridge jacks offer 25,000 lbs. of muscle meant to service some of the biggest commercial fleets on earth. This jack can be used on your HDS40 four-post truck lift to perform wheel service on almost any heavy-duty vehicle on wheels. The RBJ25000 rolling bridge jacks are over-engineered to handle offset centers of gravity on extremely heavy vehicles. Who might need bridge jacks of this caliber? For one, heavy-duty trucks and buses tend to require a bridge jack rated for more than half of the overall vehicle weight. Generally speaking, if you can safely lift a vehicle with the HDS-40 four-post lift, you can safely perform wheel service with the RBJ-25000 rolling bridge jack. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axel and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. Additional product features: * 25,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Lift to three lock positions for your convenience—the higher the jack, the more undercarriage clearance you get on your HDS-40 four-post lift * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,595.00
BendPak RJ45W rolling bridge jacks are compatible with BendPak HD-7 Series, HD-9 Series and GP-9 Series four-post lifts, so you can turn your 4-post car lift into an on-the-car wheel service dynamo! The scissor-style jacks offer peerless speed and versatility, making automotive service such as brake jobs and suspension work a cinch. The BendPak RJ45W lift bridge jacks exclusive telescoping design accommodates BendPak 4-post lifts with adjustable-width runways, precision sliders, and rollers to enable you to position the hydraulic jacks exactly where you need them. Additional products features: * 4,500 lb. lifting capacity * Easy-roll wheels * Rubber contact pads * Stackable adapters to provide added clearance when needed * High-pressure hydraulic power unit
Not Yet Reviewed
$2,450.00
The BendPak RBJ15000 rolling bridge jacks are made for the HDS-35 four-post lift—which is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy access to the undercarriage but can't get to the wheels. BendPak rolling bridge jacks open the door to new service opportunities, such as wheel balancer, wheel alignment and tire changer equipment. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak's exclusive, optional airline kit. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy! Additional product features: * 15,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Three safety-lock positions—raise your jack to three different heights—whatever is most comfortable for you! * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$5,895.00
The Tuxedo RAJ-8K rolling air jacks are a high-quality, low-profile, air bag scissor type rolling bridge jack with pneumatic operation that includes exclusive telescoping universal roller body bracket assemblies. These scissor-style jacks are designed for either high mount or low mount applications. Dual spring-loaded precision roller bearings and guide wheels roll on top edge of jack rails for smooth maneuverability. Telescoping support arms offer air/hydraulic operation. These units also come standard with stackable pad and height adapters, dual air bags, adjustable pressure regulator and locking height position. Ships in durable wooden crate. Choose the model for your application needs. RAJ-8K-H low mount jack features: The low mount model incorporates adjustable height roller body brackets suitable for 4-Post lifts using low-profile jacks with medium-to-high mount jack rails, to provide enough clearances for proper operation when lift is fully lowered. RAJ-8K-H high mount jack features: The high mount model incorporates adjustable height roller body brackets suitable for 4-Post lifts using low-profile jacks with low-mount jack rails and high-profile runways to provide enough clearance for proper operation and from touching the ground when fully lowered.
Not Yet Reviewed
$2,502.99
BendPak RJ7W rolling lift bridge jacks are made for an HDS-14 Series four-post lift, so you can turn your 4-post car lift into an on-the-car wheel service dynamo! The scissor-style jacks offer peerless speed and versatility, making automotive service such as brake jobs and suspension work a cinch. The RJ7W rolling lift bridge jacks features an exclusive telescoping design to accommodate the BendPak HDS-14 Series 4-post lift with adjustable-width runways, precision sliders, and rollers, enabling you to position the hydraulic jacks exactly where you need them. Additional product features: * 7,000-lb. lifting capacity * Easy-roll wheels * Three safety-lock positions * Stackable adapters to provide added clearance when needed * Rubber contact pads * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$2,595.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
