Availability
Showing In Stock Items. Show All 32 Items.
Summit Bucks
Sonnax Smart-Tech overrun clutch valve kits offer a hydraulic solution to this known mechanical problem. With unique rerouting of hydraulic fluid pressure, this patented kit keeps the overrun clutch applied at all times—except overdrive 4th gear—reinforcing the roller clutch to adequately support heavy loads. Order the model recommended for your transmission application.
( 1 )
$178.60
Summit Bucks
The feed limit low valve in listed GM transmissions limits line pressure feed to the default disable solenoid and control valves. Feed limit low pressure is also connected to the boost ball system for "A" and "B" clutch control. This feed limit low valve is subject to significant side-load force, resulting in severe wear and pressure loss to the default disable solenoid and connected control valves. Such pressure loss can put the vehicle into default mode at high speeds, resulting in momentary wheel lockup, sudden downshift to 2nd gear, harsh shifts or a P0747 code. The feed limit low valve can wear out in as little as 30,000 miles, with many vehicles requiring service by 35,000 miles. A national recall from GM includes installing updated software that monitors valve performance and wear, then triggers a check engine light and reduced propulsion message 10,000 miles before failure. Vehicles are then limited to 5th gear, commonly referred to as limp mode, until the valve body is serviced to address the failed valve. Sonnax patented this drop-in feed limit low valve kit to overcome bore wear, restoring proper valve function immediately without the need or expense of replacing the entire valve body. The valve reroutes the balance circuit through an internal passage, significantly reducing the side-load force, while upgraded materials prevent future wear. * The kit overcomes drivability issues related to the GM 10-speed wheel lockup recall * Patented valve and sleeve combination overcomes bore wear and significantly reduces future side loading of the valve * Hardcoat anodized aluminum valve and wear-resistant sleeve combat premature wear * Drop-in Zip Valve parts install quickly and easily * Kit contents: -- Valve -- Sleeve -- Spring -- Retainer -- Drill -- Rivet (Note: The OE feed limit low valve is susceptible to premature wear and therefore a critical failure point. Replacing the valve is recommended even if the transmission isn't exhibiting problems and the valve passes a vacuum test.)
Not Yet Reviewed
$26.86
Summit Bucks
Extend the life of your forward clutch and input sprag with the upgrade performance of Sonnax heavy-duty 2-3 shift valves! Your factory valve is limited to applying the overrun clutch only in D3, 3rd gear; whereas these Sonnax valves apply it in D3, 1st, 2nd, and 3rd. This furnishes extra durability to clutch components in plow trucks, heavy-duty vehicles, and in high performance apps. The Sonnax 2-3 shift valves also work well with units operated by aftermarket electronic paddle shifters--allowing for full downshift engine breaking in 2nd gear, while the shifter remains in the D3 position. No special tools are required for installation; it's a transmission overrun clutch component worth exploring!
( 4 )
$41.99
Summit Bucks
When standard OE pins just won't do, use Sonnax extra-long Servo pin and seal kits to get the job done right! The Sonnax 4L60/4L60-E servo pin is longer than the longest OE pin. The pins extra length simplifies adjustment, eliminating the need for having to add length to the pin, itself. The Servo pins are made from chromoly steel, so they're durable for high performance applications as well as stock replacement. Dual PTFE seals have been added to improve sealing in the case bore and as well as an O-ring to improve sealing between pin and the 2nd gear Servo. The kits include pin, PTFE seals and an O-ring seal.
( 5 )
$38.16
Summit Bucks
Sonnax valve body check balls are lightweight orbs that seal better. Manufactured from tough, wear-resistant imidized plastic, these check balls conform to the separator plate ball seats, creating a good seal. Steel balls are heavy and hard, causing wear on your separator plate seats from repeated high impact, while elastomer rubber ones wear easily, reducing their size and sealing ability. For excellent results from your valve bodies, service them with Sonnax imidized check balls.
( 14 )
$5.67
—
$6.18
BD Diesel pressure transducer upgrade kits are designed to replace the original governor pressure transducers, a leading cause of failure in 5.9L Cummins transmissions. These defects have become even more commonplace on performance transmissions that run higher line pressures. They replace the original sensor with a much more durable and reliable sensor signal to correct range and stop fault codes. As a result, your late model tranny can handle higher transmission line pressures without failure. Additionally, the plug-in circuit has its own built-in temperature sensor for improved reliability.
( 2 )
$210.95
Summit Bucks
Sonnax accumulator piston covers are designed for use in any GM TH350 application. They are machined from billet aluminum to provide a strong, yet lightweight alternative to OEM covers. Their dual O-ring design eliminates leaks and ensures the cover stays in position when used without an accumulator spring.
( 14 )
$36.72
If your transmission conductor plate is damaged or broken, Dorman has you covered. Their transmission conductor plates are direct replacements for the factory originals, ensuring a proper fit and performance. Dorman transmission conductor plate kits are made to the highest quality standards.
( 7 )
$188.99
TransGo valve body repair kits give you the components needed to restore proper shifts and correct other problems with your automatic transmission. They will help correct cold rough shifts, downshift problems, long shifts, hard or soft shifts and lockup problems. Repair your automatic transmission with TransGo valve body repair kits.
( 8 )
$10.29
—
$46.03
Summit Bucks
Sonnax 3-4 relay O-ringed end plug kits help restore hydraulic integrity at the end plug of your transmission's valve body. In GM 4L60-E, 4L65-E and 4L70-E units, the hammering effect of the 3-4 relay and/or 3-4 shift valves can cause the end plugs to wear, resulting in loss of 4th signal and/or D3 oil. Replace the worn OE end plugs with a Sonnax 3-4 relay O-ringed end plug kit to prevent critical losses and provide a positive seal. Contents: * 5 end plugs (includes 3 extra) * 5 O-rings (includes 3 extra)
( 3 )
$29.25
Summit Bucks
Bore wear at the compensator feed regulator valve allows critical pressure loss that prevents proper clutch timing and control, resulting in harsh shifts, bind-up, and possibly, burnt clutches. You can recover hydraulic control and renew shift performance by installing a Sonnax compensator feed regulator valve kit. These kits featuring a Sonnax drop-in Zip Valve provide you with valve, spring, sleeve, and retaining clip to restore normal compensator action. Features and benefits: * Hardcoat anodized aluminum valve combats premature wear * Highly wear-resistant aluminum sleeve provides additional valve support * Includes calibrated spring for restoring OE compensator pressure * Drop-in Zip Valve parts install quickly and easily
Not Yet Reviewed
$38.44
Summit Bucks
Continuous oscillation in relay valve and sequence valve bore causes wear that prevents proper hydraulic control. You can recover hydraulic control and renew 2nd and 4th gear operation by reconditioning the entire bore and installing a Sonnax oversized 4-3 sequence valve kit. These kits address wear on the inboard two spools that is increasingly more common in aging valve bodies. Wearing at these spools can allow valuable 4th servo feed leakage, resulting in no 4th and 2-4 band wear, and can also allow leakage of 2nd clutch oil needed to apply the 2-4 band in 2nd gear, resulting in poor 2nd gear shifts. Leaking at the OE end plug also allows oil loss that can leave 4th gear inoperable. Sonnax oversized 4-3 sequence valve kits feature hardcoat anodized aluminum valves to combat premature wear and O-ringed end plugs to help prevent 4th gear oil loss. Kit contents: * 3-4 relay valve * 4-3 sequence valve * Spring * End plug * Two O-rings (1 extra)
( 1 )
$51.20
Summit Bucks
Vehicles with a GM 8L45 or 8L90 automatic transmission may exhibit high or low line pressure that results in harsh/soft shifts, burnt clutches, loss of cooler and lube flow, and overheating of the transmission and converter. These problems may be caused by wear of the pressure regulator bore casting at the VFS signal port area and/or at the shuttle valve sleeve. Wear at the inboard port of the pressure regulator bore allows VFS (throttle) signal pressure to leak, preventing proper action of the pressure regulator valve and potentially allowing it to remain in the low line pressure position. Wear of the shuttle sleeve due to continuous oscillation of the shuttle valve creates a path for balance line pressure at the pressure regulator valve to exhaust, resulting in excessive low line pressure. Sonnax drop-in pressure regulator and shuttle valve kits restore hydraulic integrity to the lineup by addressing wear that subjects the transmission to either excessively high or low line pressure with upgraded materials and unique designs. The pressure regulator valve has been designed with a lengthened spring pocket spool at the VFS signal port area, which provides over double the sealing capability to this critical end of the valve and allows it to operate in unworn portions of the bore. The length of the critical shuttle valve diameter has been significantly lengthened to provide better sealing and durability of the assembly. Additional details: * Hardcoat anodized aluminum valves and highly wear-resistant billet aluminum sleeve combat premature wear * Pressure regulator valve VFS signal spool 200 percent longer than OE and operates in unworn area of the bore * Critical shuttle valve spool made 30 percent longer than OE for added sealing and durability * Drop-in Zip Valve parts install quickly and easily Kit contents: * Pressure regulator valve * Spring * Shuttle valve * Shuttle sleeve
Not Yet Reviewed
$65.06
BD Diesel pressure transducer adapters allow you to use a more rugged and reliable sensor/transducer. Older transmissions utilize a metal model, while a lower quality plastic model is used in later models—and this can create problems on transmissions running higher line pressures. These adapters allow late model transmissions to use a sturdier metal sensor. They're plug-and-play with no soldering or splicing required. The adapters have built-in electronic circuits that convert the sensor pressure signal to the correct range—and even stops fault codes in applications running higher-than-stock line pressures.
Not Yet Reviewed
$77.95
Summit Bucks
Transmissions showing symptoms of soft shifts from 1-2 or 2-3, periodic harsh shifts, or low line rise may be able to correct the problems with one of these Sonnax Line Pressure Modulator Plunger Valve kits. When sleeves become worn, electronic pressure control (EPC) oil can leak past the valve to cause the soft shifts; valves will also stick or hang up through wear, leading to the rough shift issue. Sonnax kits include a replacement modulator sleeve made from carbon steel to combat extreme wear, along with a durable plunger valve crafted from hardened alloy steel. The O-ring helps to prevent EPC oil loss. Sonnax Line Pressure Modulator Plunger Valve kits are produced for fitment on a variety of transmissions, including 6 and small 8-cylinder applications. Select the kit that's tailored to your vehicle.
( 2 )
$28.04
—
$42.14
TransGo Performance automatic transmission compensator feed regulator valve kits play a critical role in managing clutch function and shift-feel in the 6L series. They supply regulated pressure to the balance side of the rotating clutch drums. This is done to counteract the unintended apply of clutches due to the centrifugal forces of the residual oil in the apply chamber. Ideally, this pressure and its resulting centrifugal forces cancel out the forces inside of the apply chamber, simplifying clutch apply calculations by the computer. If the pressure is too low or too high, it can dramatically affect shift quality. In cases of very high pressure, it can keep the on-coming clutch from applying resulting in a cut-loose. Product features: * Extended land works even in worn bores, providing more support to help prevent bore wear * Self-cleaning design prevents sticking in the bore * Drop-in hardened steel valve * Corrects, Prevents, Reduces: -- Harsh shifts -- Coast downshift clunks -- Soft or flare upshifts -- No or delayed engagement
Not Yet Reviewed
$18.90
Summit Bucks
The detent ball in the valve body in listed Chrysler automatic transmissions (see Applications tab) wears into the aluminum bore due to continuous movement and vibration of the linkage. This creates excessive looseness in the manual valve lever and allows the manual valve to move out of alignment. No start or being stuck in Park can occur from the manual valve being out of position due to extra clearance. This condition often requires that the valve body be replaced. Sonnax valve body detent ball and sleeve kits allow the valve body to be salvaged. The bore must be oversized using the self-guiding bench reamer included in Sonnax tool kit 22771-TL12. A .096 in. diameter drill bit is also included to allow the retaining pin hole to be redrilled for use with the OE pin. Sonnax detent spring 22771-36 is also available. Additional notes: * Precision steel sleeve restores worn valve body and properly supports the detent ball * Precision-ground steel ball included for optimal fit with the replacement sleeve * Self-guiding bench-style reamer allows casting to be oversized quickly and accurately without specialized equipment * Kit is designed to fit both the short and long OE detent bore designs
Not Yet Reviewed
$9.44
—
$17.65
When you need replacement release valves for your TCI trans-brake, go with the originator for a perfect fit. Their valve body components are direct replacements and ensure a perfect fit and operation. TCI offers replacement components for all of their trans-brake control valves to assist you with repair and maintenance. Some release valves include a spring, as well. Your valve body is the brain of your transmission, and your trans-brake allows you to achieve quicker and more consistent reaction times--keep it functioning effectively with proper care and TCI replacement trans-brake release valves.
( 1 )
$44.95
—
$55.95
Summit Bucks
The small OE spring steel retainers used to hold the heavy solenoids in the valve body are prone to collapse, allowing the solenoids to wobble in the bore and preventing them from properly controlling the shift processes. Collapsed spring retainers also allow the solenoid to damage the casting at opening of the clutch valve bores. Securely hold the solenoid in place with Sonnax solenoid stabilization retainers. An improved Sonnax design adds 32 percent more surface area to contact the casting/solenoid interface for better support and leverage. Also, the tops of the retainers are rolled over creating a positive stop for the flexible side to land against, furthering the prevention of retainer collapse.
Not Yet Reviewed
$6.99
Summit Bucks
Sonnax throttle valve plunger kits address the poor line rise or no detent downshifts that can be common complaints in vehicles with a stock overdrive transmission. The steel plunger continuously reciprocates within the aluminum sleeve, wearing out the sleeve. This wear (plus the weak OE spring) allows throttle valve feed oil to leak past the plunger and exhaust, resulting in the aforementioned issues that can lead to 3-4 clutch failure. Sonnax throttle valve plunger kits include an improved throttle valve spring designed to properly maintain higher line pressure and improved throttle valve performance. Order the kit recommended for your transmission application. Features and items: * High-quality aluminum sleeve prevents wear * Tight-tolerance sleeve and plunger restore hydraulic integrity * Eliminates the part throttle sleeve orifice * Spring * Sleeve * Plunger
( 2 )
$45.87
Summit Bucks
Stop leaks while reviving line pressure and torque converter clutch (TCC) operation by installing Sonnax O-ringed end plug kits. OE end plugs prevent critical pressure loss by capping the bore while also functioning as a valve stop. Trust the Sonnax O-ringed end plug kits designed for your application to help you cross the finish line!
Not Yet Reviewed
$10.67
ATI offers a wide variety of automatic transmission rebuild components to restore or upgrade the response of your vehicle. Often, just a small part is needed to correct the problem—or maybe you're performing a complete maintenance overhaul. ATI's inventory includes necessities such as shift kits, bands, clutches, gaskets, shims, filters, and more. These components are tailored for fitment on specific transmission types.
( 3 )
$6.20
Summit Bucks
Sonnax park reaction brackets are a necessary part of your parking pawl assembly. These park lock/reaction brackets are precision manufactured from steel to offer the right fit so your parking pawl will fully engage. Keep your engine's power from reaching the wheels; service your parking pawl with the Sonnax park reaction brackets designed for your car make and transmission application.
Not Yet Reviewed
$12.34
When your vehicle's transmission starts shifting a little rough, it may be the fault of the accumulator. Crown Automotive accumulator piston seals will help complete new installations, keeping fluids where they belong. These seals are designed and built to OEM specs for reliability and direct fitment.
Not Yet Reviewed
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
