Switches, RPM Activated | Summit Racing

On Sale

Biondo Single Shift RPM Activated Switches

Biondo single shift rpm activated switches can handle up to four adjustable digital shift points. Feature/Spec: * Auto reset--no buttons to press * Shifts from one to four gears * Ignition On/Off input to disable shift output when not in use * Mounting tabs for easy installation * Microprocessor-controlled timing * Retain all numbers when powered off * Large LCD * 3,000-9,900 rpm range can be changed by pushing the buttons on the face of the unit * Test your shifts by holding down either button for two seconds * Two separate outputs--normally open, and closed (for CO2, air, or electric shift applications)

4.75 out of 5 stars ( 8 )

$271.99

$258.39

Summit Racing™ RPM-Activated Switches with Digital Readout

Losing those little RPM modules can be a hassle, but now you can lose them all permanently. Our Summit Racing™ RPM-activated switches allow you to select an activation level anywhere from 1,000 to 9,900 rpm in increments of 100 rpm; and they work with 4, 6, and 8-cylinder engines. The switches will activate or deactivate via several trigger sources. Detailed instructions are included for rpm activation the easy way.

4.2 out of 5 stars ( 15 )

$79.99

Nitrous Express TPS WOT RPM Activated Window Switches

The Nitrous Express digital RPM window switch is an innovative module that monitors engine RPM and throttle position to automatically activate your nitrous system based on user-adjustable RPM and TPS values. This ensures that the nitrous only activates within the specified RPM and TPS values. The large LCD has an adjustable contrast setting that adjusts how dark the numbers and letters appear. Another great feature of the window switch is the RPM filter, a noise-filtering feature that helps with ignition noise on newer vehicles. If you notice an erratic RPM Signal, you will want to enable the RPM filter feature. This module is compatible with all 1- to 12-cylinder engines with coil-on-plug, waste-spark, distributor, or crank-trigger ignition systems.

5.0 out of 5 stars ( 3 )

$253.99

MSD RPM-Activated Window Switches

MSD rpm-activated window switches allows you to take control of your nitrous. You can activate and deactivate circuits at pre-programmed rpm "windows" and they are especially useful for nitrous equipped engines, because the nitrous system can be shut down just before the engine's high-rev limit. They include a ground to activate a circuit, and can handle up to 1.5 amps.

4.54 out of 5 stars ( 26 )

$212.95

—

$304.95

Intellitronix RPM-Activated Window Switches

Intellitronix rpm-activated window switches are ideal for use in nitrous applications, allowing you to activate nitrous at a predetermined rpm and have it shut off before peak rpm. They allow you to choose from normally open or normally closed. Intellitronix rpm-activated window switches also function as a digital tachometer with a high-rpm recall function.

4.67 out of 5 stars ( 3 )

$78.99

Manufacturer Rebate

AutoMeter Level 1 Digital Pro Shift Controllers

The new technology in these AutoMeter Level 1 digital Pro Shift controllers makes it possible to do away with traditional plug-in chips, while providing a combination of features only previously available on the larger Shift-Lite and Playback tachometers. These Level 1 controllers feature a single programmable shift point and a digital rpm display and are compatible with 4-12 cylinder engines.

4.67 out of 5 stars ( 3 )

$149.99

Nitrous Express RPM Activated Window Switches

Activate and deactivate circuits at pre-programmed rpm "windows" with these Nitrous Express switches. They are especially useful for nitrous-equipped engines because the nitrous system can be shut down just before the engine's high-rev limit. They include a ground to activate a circuit and can handle up to 1.5 amps.

Not Yet Reviewed

$99.99

Lingenfelter RPM-003 Digital RPM Window Switches

Lingenfelter RPM-003 digital rpm window switches provide microsecond precision! These switches from Lingenfelter Performance Engineering are capable of performing as standard rpm-activated switches or they can provide "window" switch-type capability, switching when one rpm level is reached and then switching back when a second rpm set point is reached. The digital rpm window switches utilize a precision 32-bit timer to realize microsecond precision over a very wide operating rpm range, and they support most common tachometer pulse frequencies, without additional components being required. Lingenfelter RPM-003 digital rpm window switches also feature: * Two-color LED for error codes and operating condition notification * Custom-molded, high-temperature, glass-filled Nylon 6 enclosure * A tachometer pull-up resistor enabled by a dip switch setting inside the back cover * An analog 0-5 V input signal that can provide TPS, clutch sensor, or MAP sensor input

5.0 out of 5 stars ( 4 )

$191.85

Shifnoid RPM-Activated Switches

Shifnoid rpm-activated switches can be used to activate CO2 or electric shifters, nitrous oxide solenoids, shift lights, timing computers, or any other device that needs to be activated at a preset rpm. They accept plug-in modules, so you can set your specific rpm. The Shifnoid rpm-activated switches are 12 and 16 V compatible and have been designed to work on V8 engines.

3.67 out of 5 stars ( 6 )

$149.99

NOS Two-Stage Wide Open Throttle/RPM-Activated Window Switches

NOS two-stage wide open throttle/rpm-activated window switches are a compact, user-friendly way to eliminate the need for replacing rpm pills every time you want to change the activation rpm of your nitrous kit. They take window switches to the next level, too, eliminating the need for two rpm-activated window switches to control your two stages of nitrous! NOS two-stage wide open throttle/rpm-activated window switches feature two fully programmable independent rpm window switches. They can operate from 0 to 20,000 rpm for anything from a low-rpm engine to a high-revving sport bike, and they are perfect for carbureted or EFI vehicles. Their capability to read a rising or falling throttle position sensor provides accurate activation--every time. A programmable output activates a shift light for on-time, gear-pounding shifts, and the recall feature shows max rpm and TPS voltage for easy setup. NOS two-stage wide open throttle/rpm-activated window switches have a bright, easy-to-read display and bright LEDs that light up when stages are active for easy activation verification. These versatile switches can be used for nitrous or to activate other accessories.

4.5 out of 5 stars ( 10 )

$311.95

Manufacturer Rebate

Dedenbear RPM2 Switches

Dedenbear RPM2 switches feature push-button thumbwheels to let you select any shift point in 100 rpm increments, from 1,000 to 9,000 rpm. The switches sense rpm using MSD, Mallory, Crane, or any other standard ignition system. They have a 0.5-second delay feature that wires into the transbrake, or roll control to prevent false shifts due to tirespin, converter flash, or launch.

4.0 out of 5 stars ( 1 )

$337.99

MSD Programmable Shifter Controllers

RPM control for your transmission—MSD programmable shifter controllers allow you to set different rpm points to trigger the shift solenoids. Any configuration may be used on up to a 6-speed transmission. The controllers feature six LEDs on their end panels. Programming can be done on a Windows-based PC or with MSD's hand-held monitor (not included). MSD programmable shifter controllers include: * Shift controller * Pro-Data+ software * 9-pin harness—10 ft. * 1-pin harness * Deutsch terminated harnesses * Butt splices * Ring terminals * Screws, nuts, and washers

Not Yet Reviewed

$949.95