Availability
Summit Racing™ slide hammer puller sets help pull flange-type axles and front wheel drive hubs. They include both internal and external jaws, a sheet metal puller adapter, dent puller, puller hook, locking plier adapter, and heavy-duty case.
( 2 )
$119.99
A lot of times you can't get a slide hammer in a spot where you need it to go. Thinking outside the box, Astro Tools came up with a cool tool—the stubby air slide hammer! The tools' innovative compact design will allow auto technicians to get to those hard-to-reach areas underneath the car. Product Overview: * The market's 1st true air slide hammer puller, delivering up to 1200 hammer blows per minute with the pull of a trigger * Compares to a 3.5 to 4.5 lb. manual slide hammer on hard joints (rusted, solid and stuck parts) and 4.5 to 6 lb. on non-hard joints (dent pulling, rear axle bearings, etc.) * Common 5/8 in.-18 threads for use on the majority of slide hammer attachments to pull everything from pilot bearings to hubs and collision repair * Both the extension rod and spindle threads match for use with either more reach or as a stubby slide hammer, working where traditional tools do not have enough clearance * Lever throttle allows for adjustment of force and speed, allowing you to stay focused on the workpiece and dial in the required power while the tool does the work * Power scales with inlet pressure and volume, 90-120 psi recommended
( 2 )
$181.99
OTC's 9-way slide hammer puller set will make pulling alot easier. This OTC tool will allow you to pull flange-type rear axles and most front wheel drive hubs. Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals. Two and three way cross blocks and cone provide the perfect jaw configuration for most jobs. Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
( 35 )
$137.99
Astro Pneumatic Tool Company locking pliers slide hammer pullers are designed to remove everything from cotter pins to old seals and bushings by using the universal puller to lock and hammer onto objects. The slide hammers quick detachable swivel end allows for adjusting and locking pliers onto the subject then attaching sliding hammer for removal. The threads in these units will thread into most common locking pliers and vice grips for use with your existing tools as well. For quality-built tools to get the job done, be sure to choose tools from Astro Pneumatic Tool Company.
( 3 )
$48.99
Whether you're a novice or a professional, without Performance Tool slide hammer puller sets, nine times out of ten, you will have difficulty removing pilot bearings or any other items requiring internal pulling. These sets are designed to work for different applications to make the job easier, and to also help minimize part and component damage. Use them once and you'll agree, they pretty much pay for themselves!
( 3 )
$114.99
—
$129.99
Morgan Manufacturing Nokker slide hammers are a must for unitized body reconstruction. They're great for applying alternate forces when used in conjunction with frame machines or benches. The hammers are available in a variety of sizes, and come with many attachments. Get that body dialed in just right with help from Morgan Nokker slide hammers.
Not Yet Reviewed
$225.99
—
$499.99
These slide hammers may be used with an OTC internal pulling attachment. These OTC basic slide hammers will also work with female or male-female threaded adapters.
( 8 )
$52.99
—
$193.99
OTC designed these pullers for jobs requiring an internal pull. These OTC sets include a 2.500 lb. slide hammer with a T-handle. Simply insert the collet, expand it to fit the hole, and then attach the slide hammer.
( 6 )
$225.99
—
$602.99
Not everyone is familiar with slide hammers. They're tools that attach to an object needing to be pulled—and transmit an impact force to the object without striking the object itself. Motor Guard slide hammers feature a polished steel bar, with sure-grip rubber handle that ensures positive pulling action. The slide itself is made of cast iron, and the collet is heat-treated steel for maximum grip and extended life. These tools are designed for stud gun welders and will pull all standard pins. (Heavy-duty models and kits are also available.)
Not Yet Reviewed
$125.99
OTC's slide hammer pullers give you the versatility to get the job done. Since they are only 1.500 lbs., these OTC slide hammers are perfect for working in those tight areas and pulling injector nozzles. These slide hammer pullers work with many OTC pulling attachments.
Not Yet Reviewed
$62.99
OTC's Silver Slapper 8-way slide hammer puller sets will make pulling a lot easier. These OTC tools will allow you to pull flange-type rear axles, stubborn oil seals and bearings, and other press-fit parts. The jaws can be set up for 2/3-way internal or external pulling jobs. These sets feature: * Slide hammer with 5 lb. head * Rear axle pulling attachment * 3-way cross head * Cone * 2-way cross block * Puller hook attachment * Three pulling jaws * Single lead with grip wrench adapter (wrench not included) * Dent puller attachment
( 1 )
$229.99
When the 10 lb. slide weight is too heavy and 3 lb.-weight pullers are too light, Tool Aid mid-weight slide hammer/dent pullers are just right! S&G Tool Aid mid-weight slide hammer/dent pullers are designed for those in-between jobs, providing excellent balance with 5 lb. slide weight on a plated, solid, 5/8 in. shaft. The tools are fitted with Tool Aid's exclusive soft cushion blue vinyl grip that absorbs shock and a "hang-it" hole for easy storage. Additional features and benefits: * Broached nose cone locks puller screw firmly in place * Supplied with heavy-duty aircraft steel body hook for pulling out curled and creased edges and panels * Helps in aligning hood and trunk hinges * Nose cone and shaft threads are 5/8 in.-18 * Heavy-duty puller screw is extra-long
Not Yet Reviewed
$72.99
S&G Tool Aid front wheel hub and rear axle slide hammer pullers have a specific purpose to reduce effort, time, and labor, making a tough job easier. They include puller and hammer along with the needed components and hardware for suspension and alignment work. Features and kit components include: * Heavy-duty 10 lb. slide hammer on steel shaft * Pullers fit 4, 5, and 6-bolt patterns for use on most domestic and imported cars and light trucks * Easily removes front wheel hubs and flange type rear axles * Axle and hub pulling adapter accepts other 5/8 in.-18 female threaded pulling attachments * Components: Axle and hub pulling adapter, rear axle pulling yoke, front wheel hub puller, slide hammer, slide shaft, hand grip, and forcing screw and hex nut
( 2 )
$189.99
OTC's special slide hammer pullers are designed for pulling jobs in very confined areas, such as the removal of small bore bushings, bearings, oil seals, etc. The internal pulling attachment has a jaw spread of 0.500 to 1.375 in. and is adjusted by turning the slide hammer handle.
( 1 )
$134.99
Titan blind hole bearing puller sets are for use with a wide range of applications which require an internal pull, such as pilot bearing and needle bearing removal. Titan's 5-piece sets include: * One 3 1/2 lb. T-handle slide hammer * Four expanding collets in sizes: -- 3/8 in. to 1/2 in. -- 9/16 in. to 11/16 in. -- 5/8 in. to 1 in. -- 1 in. to 1 1/4 in. * Storage case
Not Yet Reviewed
$151.99
For a wide range of job versatility, use Sunex Tools slide hammer puller sets. They aid in the ease of removal of flange-type axles, oil seals, bearings, and other press fit parts. If you want to get the job done like the pros, use Sunex Tools. Sets include: * Heavy-duty slide hammer * 8-function internal or external 3-jaw puller * Internal or external 2-jaw puller * Dent puller * Rear axle puller * Special grip wrench adapter * Heavy-duty steel carrying case
( 6 )
$95.99
Motor Guard has designed these slide hammers to have a rugged, heavy-duty construction with a quick-release chuck to grip pins firmly without slipping. They feature a cast iron slide weight and a comfortable vinyl grip for ease of use.
Not Yet Reviewed
$178.99
These OTC pullers will pull many jobs involving gears, bearings, outer races, grease retainers, oil seals, etc. Two or three jaws may be used to handle inside pulling jobs such as bearing cups and outer races, as well as regular outside pulling jobs. An additional feature of the slide hammer units is that they can be used independently.
( 1 )
$139.99
—
$142.99
Cal-Van Tools 14-piece slide hammer and puller sets can be used in many ways. The 2 lb. slide hammer and array of attachments can be utilized to aid in pulling seals, bearings, pressed studs, or even for straightening body panels. Features include: * Capable of inside spreads from 3/8 in. to 1 1/4 in. and outer spreads up to 3 in. * Puller reaches depths up to 2 1/2 in. * Set components: -- Slide hammer -- Threaded rod -- Screw adapter -- Square hook -- Jaw adapter -- 2-jaw puller -- Hook puller -- Locking pins -- Cone rod -- Small jaws -- Large jaws -- T-handle -- Blow-molded storage case for easy storage and organization
Not Yet Reviewed
$66.99
OTC's Silver Slapper 8-way slide hammer puller sets will make pulling a lot easier. These OTC tools will allow you to pull flange-type rear axles, stubborn oil seals and bearings, and other press-fit parts. The jaws can be set up for 2/3-way internal or external pulling jobs. These sets feature: * Slide hammer with 5 lb. head * Rear axle pulling attachment * 3-way cross head * Cone * 2-way cross block * Puller hook attachment * Three pulling jaws * Single lead with grip wrench adapter (wrench not included) * Dent puller attachment * Includes plastic carrying case
Not Yet Reviewed
$426.99
OTC's slide hammer puller sets give you the versatility to get the job done. The pulling attachments supplied will help pull various sized pilot bearings, oil seals, bushings, timing gears, harmonic balancers, and other tightly fitted parts. These sets use cap screws with up to 3/8 in. diameters and a spread from 1 7/8 to 5 5/8 in. Sets include: * Reversible jaw slide hammer puller with a 2.5 lb. hammer * Three medium jaws * Three pilot bearing jaws * Three long jaws * Puller hook * 2-way cross head * Cross block
Not Yet Reviewed
$304.99
S&G Tool Aid dent puller and slide hammers are cost-effective, quality tools perfect for any shop or garage. They feature a 3 lb. slide weight that is mounted on a 1/2 in. plated steel shaft. Famous blue vinyl grips cover the steel handles to reduce sting on technician's hands and provides 100 percent grip. They are designed with a broached hex in the nose cone that locks pulling screw in place and ends breakage. S&G Tool Aid dent puller and slide hammers are supplied with two hardened pulling screws and an "L" puller hook fabricated of aircraft quality steel. The nose cone and shaft threads are 1/2 in.-20.
Not Yet Reviewed
$38.99
K Tool slide hammer pull kits will allow you to easily remove flange-type axles, oil seals, bearings and other press fit parts. The kits are available with different accessories, all packaged in a sturdy blow-molded plastic case for organization and storage:: * Kit 70510 contents: 2-jaw puller, 3-jaw puller, rear axle puller, dent puller, grip wrench adapter, and 5 lb. slide hammer. * Kit 70520 contents: Hub puller, rear axle puller, dent puller, 2-way cross block, 3-jaw puller, grip wrench adapter, 3-way cross axle head, 5 lb. slide hammer, and other accessories.
( 1 )
$135.99
—
$185.99
Cal-Van Tools auto body knocker sets combine a 9.5 lb. slide hammer with the most popular pulling attachments to accomplish numerous auto body repair applications. The specialized adapters provide access to tight areas and alleviate the need to remove other panels. Here are some additional product details: * Eight interchangeable attachments for pulling and straightening body panels * Provides access to hard-to-reach supports and inner structure * Drop-forged steel construction * Packaged in a robust blow-molded case Kit includes: * Chain hook * Offset blade * Claw hook * Door edge hook * Deep hook * Short hook * Slide hammer shaft * Slide hammer handle * Slide hammer adapter * Sheetmetal screw with adapter * Threaded punch with adapter
Not Yet Reviewed
$144.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
