Availability
To a lot of enthusiasts, there’s no better feeling then grabbing hold of a shifter lever and rowing through the gears of a manual transmission. If that sounds like you,...
To a lot of enthusiasts, there’s no better feeling then grabbing hold of a shifter lever and rowing through the gears of a manual transmission. If that sounds like you, then you’re in the right place. Summit Racing offers a huge assortment of shifter handles to help you harness all of your engine’s ponies.
Yet with so many shifter options for your manual transmission, choosing a shifter stick may not be as easy as it sounds. You’ve got to take into consideration your manual transmission model, your shift style, your engine power, your cabin/seating geometry, and general shift lever aesthetic. But again, good news, Summit...
To a lot of enthusiasts, there’s no better feeling then grabbing hold of a shifter lever and rowing through the gears of a manual transmission. If that sounds like you, then you’re in the right place. Summit Racing offers a huge assortment of shifter handles to help you harness all of your engine’s ponies.
Yet with so many shifter options for your manual transmission, choosing a shifter stick may not be as easy as it sounds. You’ve got to take into consideration your manual transmission model, your shift style, your engine power, your cabin/seating geometry, and general shift lever aesthetic. But again, good news, Summit Racing has hundreds of manual shift levers for you to choose from.
Here’s something else to consider. If you’ve been an enthusiastic shifter your entire life, there’s a good chance your manual transmission shifter stick has worn a bit, which could result in a sloppy, loose shifter feel. So, there are plenty of direct replacement shift handles available for many popular manual transmission styles too, and you can find them by simply searching by model number—check out the handy search filters to help refine your shifter search results.
But if you’re not looking for a direct replacement, how do you find the right shift stick for your ride? The answer probably starts with a ruler or tape measure. In fact, a lot of gearheads will even go so far as to mock-up a shift lever with cardboard or wooden dowels to get a ballpark idea of where they want their shift knob to be located. Once you have those rough measurements, you can start refining your search to shift levers that share similar specs. And Summit Racing will include as many of those shifter measurements as possible on the shifter description page, including shifter stick length, layback, and (if applicable) shifter offset.
One final thought on selecting a manual transmission shift lever: If you have a specific shift knob in mind to install on your new shifter stick, make sure to check its thread pitch. While many shifters have 3/8-16 inch thread for the shift knob, it’s not uncommon to see 3/8-24 inch (or other) thread too. Again, you’ll find thread specs in each shifter’s overview page.
Ready to start shopping for a manual shift lever? Use the search filters and see all the manual transmission shifter sticks for your application now, at Summit Racing.
Showing In Stock Items. Show All 44 Items.
Customize your ride with Hurst Competition Plus flat shifter sticks. Each stick is manufactured using top quality materials and given an awesome finish that is sure to set off your interior. You can choose from different lengths and styles to give a custom fit, making you ready for the street or the strip. Finish your interior with Hurst Competition Plus flat shifter sticks.
( 284 )
$75.65
—
$269.95
Summit Racing™ billet shifter levers are direct bolt-on sticks for Tremec and Borg Warner manual transmissions as well as Summit Racing™ automatic shifters utilizing a 7/8 in. center-to-center 2-bolt mounting flange. These machined billet aluminum and anodized levers will give any center console that clean, smooth appearance. Levers also include a billet shift knob with 3/8 in.-16 thread.
Not Yet Reviewed
$173.99
Hurst pistol-grip shifter handles will give your 4-speed Mopar an original look and feel. They are made from steel and then chrome plated for great looks. These shifter handles feature the classic embossed Hurst logo. They are designed for use with Hurst Competition Plus shifters and installation kits.
( 13 )
$399.95
—
$434.95
Bowler Performance shift levers are created and designed for the Tremec customer. Offered in several styles and lengths in raw aluminum or black anodized, each lever is crafted from billet aluminum to be a direct bolt-on for TKO-500, TK0-600, and T-56 with the standard 2-bolt flange. They include mounting hardware and have 3/8 in.-16 threaded studs for your favorite shift knob. Now you have the option to upgrade your interior with Bowler's sleek shift levers. Choose your desired length, design, and finish.
( 3 )
$156.99
—
$164.99
Silver Sport layback shifter sticks are offered in different shapes and lengths for compatibility with several transmissions and vehicles. SST shifter sticks are available in billet aluminum styles with anodized finishes or in steel with powdercoat or triple chrome plate finishes.
( 5 )
$89.95
—
$249.95
California Pony Cars manual transmission shifter sticks get your Ford off to a fast start with beautiful premium-quality reproductions. Made using only top-grade materials to ensure a quality finish and long product life, these shifter sticks are available in several designs, and all feature quality chrome plated (some are triple-chrome plated) finishes for durable, long-lasting looks. Keeping your Mustang's original appearance is easy with CPC shifter sticks, and they also offer high-quality Concours-correct reproductions for your classic.
( 6 )
$165.00
—
$184.99
On Sale
Hurst tube-style shifter sticks are a great way to bring a more modern look to your interior. They also provide comfort by offering the correct height and pullback required for individual needs. With common attachments on both ends, Hurst sticks allow almost limitless shift handle/knob and transmission applications. The steel shifters are available with a chrome or satin black finish. Additional details: * Fits most popular manual transmissions * 3/8 in.-16 threads offer compatibility with most handles and knobs * See Notes above for specific application information
( 5 )
$181.95
$89.95
—
$181.95
On Sale
Hurst billet aluminum shifter sticks are designed to bring a more modern look to your vehicle's interior. They are CNC-machined from billet 7075 aluminum, then given a MIL-Spec black anodized finish and post machined to give them a high tech look. The shifter sticks are offered in either a straight or lay-back design in a choice of lengths. All of them feature the classic Hurst H logo machined into both sides, and include a 3/8 in.-16 stud and locknut to accommodate your choice of shift knob (not included). They will bolt to all Hurst shifters with the standard 2-bolt mounting method.
( 14 )
$199.95
$73.95
—
$181.95
B&M Jeep shifter stick assemblies are designed specifically for all Jeep Wrangler TJ/JK models with 6-speed manual transmissions and can be used as either a direct-replacement of the factory shifter stick, or as the finishing touch when used with the B&M JK Precision SportShifter. They are constructed from high-strength 4340 nickel-chromoly steel and feature improved bends that provide more shifting leverage and comfort than the factory stick. The stock Jeep shift handle has a thick and soft rubber isolator between the shifter and the stick that reduces transmission noise inside of the Jeep, but degrades over time and results in a very "mushy" feel. B&M Jeep shifter stick assemblies feature a billet aluminum block with four replaceable rubber O-rings that provide isolation from transmission gear noise and also result in shorter, noticeably firmer and more positive shifts. The shift handle is finished off with a durable black e-coat and topped with a black round B&M logo engraved shift knob showing that you take off-road performance seriously. They feature a 3/8 in. x 16 thread pattern so you can also customize the look of your shifter with other styles and colors of shift knobs.
( 12 )
$274.95
Lokar manual transmission shifter levers are direct bolt-on sticks for Tremec and Borg Warner manual transmissions. They are offered in billet aluminum or steel construction; different finishes; straight, single, or double bend styles; and in several different lengths. Choose the perfect fit to complement your vehicle. Billet aluminum sticks: * Direct bolt-on for Tremec T5, T45, T56, TKO and Magnum * Machined groove for boot attachment * 3/8 in.-16 thread for shift knob * 6 in. and 8 in. straight and 6 in., 8 in. and 10 in. single bend options * Brushed aluminum or black finish Steel sticks: * Direct bolt on for Tremec T5, T45, T56, TKO and Magnum with 7/8 in. center-to-center bolt spacing * Tremec/Borg Warner kits include 8mm socket head cap screws * Tremec TKO and Magnum kits include 3/8 in.-24 socket head cap screws * All levers feature a 3/8 in.-24 shift knob thread * 10, 12, and 16 in. single bend, and 16 in. double bend * Chrome or black finish
( 38 )
$158.95
—
$235.95
Get shifting into high gear with replacement Hurst Competition Plus round shifter sticks. They are constructed from high-strength steel with a shiny chrome finish and are stamped with the Hurst name. Got a custom application? These sticks are ideal to meet that special height or offset. They will fit any Hurst 2-bolt style shifter assembly and just about any Hurst knob or T-handle. Gear up with replacement Competition Plus round shifter sticks.
( 11 )
$126.95
—
$164.95
Billet Specialties Grid-style shifter levers are uniquely designed and precision-machined from 6061-T6 aluminum. These levers are engineered as direct bolt-ons for Tremec TKO500, TKO600, and Borg Warner T-56 transmissions. Grid-style shifter levers are available in two lengths, two finishes, and they include a 3/8-16 stud.
( 5 )
$109.95
Sikky Manufacturing kinked shifter handles is designed to relocate your shift knob forward or backwards 2.5 in. When building a car, whether for the street or track, having an ergonomic shifter location is necessary and their kinked rods will help you achieve just that. They can be used with most shifters that are utilizing a 2-bolt attachment. Includes: * CNC-machined 6061 aluminum shift rod attachment * Threaded for M10 x 1.25 shift knobs * All necessary hardware
( 1 )
$64.59
Crown Automotive manual transmission shifter levers can help you restore definitive gear command. They offer components for classic and newer Jeeps, from levers, stub shafts that the lever attaches to, and repair kits with spring, boot, clamp, and more. Service your Jeep shifter for smooth operation with parts from Crown.
( 4 )
$68.99
—
$79.99
Hurst Nitro Stick 2 shifter sticks are designed to bring the classic pistol grip well into the 21st Century. Machined from billet aluminum, they provide a positive grip for quick, solid shift action from any Hurst shifter using the 2-bolt handle attachment. They include a built-in 12 V momentary switch that you can use to control your line lock, nitrous system, or whatever suits your needs. The Hurst Nitro Stick 2 shifter sticks have a machined, thumb-operated cover that protects the activation button until needed, and a red LED provides illumination with the button cover open or closed.
( 8 )
$417.95
Sikky Manufacturing straight shifter sticks can be used with most shifters that are utilizing a 2-bolt attachment. These upper shift rods are CNC-machined from stainless steel, available in different lengths, and are threaded for 3/8 in.-16 shift knobs. Fitment: * Bolt size and spacing used is common to most aftermarket and original equipment shifters used on Tremec transmissions * Fits all Sikky T56, TR6060 and T56 Magnum shifters * Hurst aftermarket shifters
( 12 )
$42.74
These Steeda Tri-Ax shift handles combine the quick shifts of a short handle with an easy-to-reach, ergonomic design. The exclusive 3-axis bend positions your hand perfectly for short, precise, and comfortable shifts. As a result of Steeda's never-ending search to provide the very best performance parts, all Tri-Ax handles are now forged from high-strength aluminum alloy. The new forging features a tapered thread boss and military spec radius-root threads to increase strength by over 70 percent. This high-strength, lightweight design reduces inertia for quicker and more precise shifts than are possible with bulky steel handles.
( 15 )
$49.95
Scott Drake shifter levers stand out with factory detailing and triple chrome plating. They include a cable and T-lever. Choose quality workmanship and looks for your classic--choose Scott Drake shifter levers.
( 2 )
$199.95
Clayton Machine Works truss-style shifter arms offer great details for your interior. Machined from billet aluminum, these truss-style shifter arms have a gray powdercoated finish and feature unique triangular framework. They will fit standard 2-bolt flanges and are available in a choice of lengths, both with a 30 degree kickback. A great looking ride has great looking details. Clayton Machine Works truss-style shifter arms support that idea with one-of-a-kind appeal.
( 5 )
$184.95
—
$191.95
Silver Sport Replica shifter handles are carbon copies of the originals. They are designed specifically for SST's Tremec transmission conversion kits and feature a chrome handle with black chrome ball.
( 1 )
$99.95
Don't be fooled by the beauty of JOES Racing Products aluminum shift levers. They are precision-machined from 6061-T6 aluminum to be lightweight yet strong enough to handle your aggressive shifts—and look good doing it. JOES shift levers are offered in two styles, straight and setback; both come with a 3/8 in.-16 stud to mount your favorite shift knob. Order the aluminum shift lever model you prefer.
( 8 )
$57.95
—
$69.95
Summit Racing™ Freedom series manual transmission shifter sticks are made from one piece of billet 6061 aluminum. The 5/8 in. thick design with stylish cutouts saves weight, while retaining the rigidity needed for those aggressive shifts. All sticks have an anodized finish in either clear or black and a stainless 3/8 in.-16 stud and jam nut for shift knob installation. Available in 7 in. straight and 8.5 in. or 10 in. layback designs. They're direct bolt-on levers for shifters with a 7/8 in. center-to-center 2-bolt pattern such as Tremec, Muncie, Borg Warner, Saginaw and more.
( 1 )
$69.99
—
$79.99
American Powertrain shifter handles are recommended as stock-style replacements for classic GM muscle cars and Mustangs. The 10 in. long polished stainless steel handles are a standard 2-bolt style. Replace worn or damaged gear shift handles with American Powertrain shifter handles. Refer to Application tab to confirm fitment.
( 1 )
$171.99
Long shifter sticks are designed to replace or upgrade your current stick. These replacement sticks are available in lightweight aluminum and chrome plated steel.
( 4 )
$140.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
