Availability
Your ride might be a classic, but that doesn’t mean you have to put up with sloppy, vague steering. Summit Racing Equipment carries rack and pinion steering conversion...
Your ride might be a classic, but that doesn’t mean you have to put up with sloppy, vague steering. Summit Racing Equipment carries rack and pinion steering conversion kits so you can bolt on the modern precision and road feel that’s missing in your old-school steering box. Plus, rack and pinion steering systems are lighter, which improves weight distribution and handling, and most kits install with no permanent modifications to your vehicle.
Kits are available for GM and Ford cars and trucks, with and without power assist. A typical kit includes a steering rack, mounting cradle/bracket, tie rods, and hardware....
Your ride might be a classic, but that doesn’t mean you have to put up with sloppy, vague steering. Summit Racing Equipment carries rack and pinion steering conversion kits so you can bolt on the modern precision and road feel that’s missing in your old-school steering box. Plus, rack and pinion steering systems are lighter, which improves weight distribution and handling, and most kits install with no permanent modifications to your vehicle.
Kits are available for GM and Ford cars and trucks, with and without power assist. A typical kit includes a steering rack, mounting cradle/bracket, tie rods, and hardware. Additionally, power-assisted rack and pinion kits may include lines and hoses, a pump, and a reservoir.
Showing In Stock Items. Show All 33 Items.
Flaming River 1955-57 Chevy power rack and pinion cradle kits make your dream ride a dream to drive! Flaming River makes your classic even better with their unique and easy-to-install cradle kits. The true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location--no suspension modifications are needed. Plus, by mounting the rack on the cradle system, you are reinforcing the Chevy chassis and providing increased ground clearance. Kits are available without columns or with your choice of polished or paintable tilt columns--something your '57 never had! Tri-five Chevys are probably some of the most recognized American classics, and to restore one is many an enthusiast's dream. Give your 1955-57 Chevy perfect modern steering from Flaming River 1955-57 Chevy power rack and pinion cradle kits.
( 4 )
$1,854.99
Flaming River 1963-82 Corvette power rack and pinion cradle kits upgrade your factory steering to a more modern, better handling system. These conversion kits bolt into your existing chassis and original mounting locations with no suspension modifications. They strengthen your current system, provide full turning radius, and work with your present steering column and power steering pump. Hardware and universal joints are included. Equip your Corvette with the best performance features from Flaming River!
( 4 )
$1,431.99
—
$2,469.99
Flaming River Chevelle power rack and pinion cradle kits offer classic bolt-in technology. These power cradle kits mount in your chassis' existing factory holes--no cutting, drilling, or welding is required--and basic hand tools get the job done easily! Add a lighter, more responsive steering system with a full turning radius to your classic vehicle, with American-made Flaming River Chevelle power rack and pinion cradle kits. Many Chevelle rack and pinion kits are delivered with: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints * Power steering pump * Pulley * Shafting * Reservoir * Billet swivel floor mount * Sway bar for added stability * On some models, painted or polished tilt steering columns are available options
( 1 )
$2,302.99
—
$3,239.99
Flaming River 1973-87 Chevrolet truck power rack and pinion cradle kits feature a one-piece formed cradle design and built-in skid protection. Their solid plate steel offers increased strength. These cradle systems also feature a new front steering power tubular-style rack and pinion with a .98 in. rack shaft for increased strength, and a billet servo valve for cooler operation. Some of these Flaming River systems are also available with a tilt steering column for easier installation and convenience.
Not Yet Reviewed
$3,505.99
—
$4,295.99
Convert your steering box application to Flaming River 1970-81 Camaro manual rack and pinion steering--without modifications! Their cradle kits offer a lighter, more responsive steering system for your classic ride. These unique Flaming River cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes! With your kit, you'll receive universal joints, a shaft support bearing, a mounting clamp, hardware, a billet swivel floor mount, and, of course, their patented rack and pinion cradle system. Kits are available with or without tilt key columns. Update your classic to enjoyable driving with Flaming River 1970-81 Camaro manual rack and pinion cradle kits.
Not Yet Reviewed
$2,075.99
—
$2,721.99
Your Tri-five classic just got better with Flaming River 1955-57 Chevy manual rack and pinion cradle kits. You love your Chevy, and now you'll love driving it even more! These kits are unique, easy-to-install systems offering less weight, more strength, and a full turning radius. These Chevy kits feature their patented welded mounting cradle with a rack that bolts in place using the original chassis location, providing the reinforcement of your chassis and more ground clearance! They also include mounting hardware, a wiring connector, universal joints, and a swivel floor mount. Polished or paintable tilt columns are separate options. Whichever you choose, you're sure to enjoy driving your American classic even more! Give your classic a bit of modern technology with Flaming River 1955-57 Chevy manual rack and pinion cradle kits.
( 4 )
$1,535.99
—
$2,722.99
Swap your steering box setup for a lighter, more responsive modern steering system in your classic. Flaming River 1970-81 Camaro power rack and pinion cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes. The kits include your choice of tilt key columns or no-column, a stronger 1 in. rack gear, a billet-joint and column adapter, mounting hardware, a polished aluminum mounting reservoir, and a power steering pump and pulley. All included to allow you more than 6 in. of travel and a full turning radius. Enjoy driving your classic car with this upgrade-- Flaming River 1970-81 Camaro power rack and pinion cradle kits.
( 2 )
$2,572.99
—
$3,687.99
Flaming River 1965-70 Mustang power rack and pinion cradle kits can upgrade your classic Pony's steering system. The patented conversion kits are stronger, lighter, and more responsive. They also retain the full factory turning radius and offer more travel than your OE system! Mustang power cradle kits feature a welded cradle that bolts right in—no cutting, drilling, or welding is required! They're available to fit with the original or Granada spindles, and come with or without columns that are paintable or polished. Each kit also includes mounting hardware, wiring connectors, universal joints, a power steering pump, a billet bracket and pulley, and a polished aluminum reservoir. All are fluid and pressure-tested before shipping. Order the model recommended for your Mustang application.
( 8 )
$2,019.99
—
$3,374.99
From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 9 )
$2,583.99
—
$4,037.99
Flaming River 1960-65 Comet/Falcon power rack and pinion cradle kits add modern steering to your classic! These conversion kits require no cutting, drilling, or welding; they simply bolt into your vehicle's original mounting holes using basic hand tools. The units provide more than 6 in. of travel and a full turning radius—and are available with a floor shift or column shift tilt steering column, or no column at all. Flaming River power rack and pinion cradle kits are fluid- and pressure-tested before shipping. Order the model recommended for your Comet, Falcon, or Mercury application. Kits include: * Rack and pinion cradle system * Mounting hardware required for installation * Wiring connector * Universal joints and shafts * Power steering pump and pulley * Polished aluminum mounting reservoir
( 4 )
$2,859.99
—
$3,078.99
Flaming River 1963-82 Corvette manual rack and pinion cradle kits give your classic Vette modern handling! Ready to adapt to your existing column, these Flaming River Corvette cradle kits offer improved handling and performance making your classic even more enjoyable to drive! Kits feature their patented fixture-welded mounting cradle systems that fit between the frame rails and bolts in place using the original chassis location. These systems allow full turning radius with much more responsive steering than the original. Kits also include hardware and chromemoly universal joints.
( 5 )
$1,783.99
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$3,506.99
—
$3,773.99
Flaming River 1955-56 Chevy Power rack and pinion cradle kits deliver precision steering on your restoration vehicle. Their Billet-Power rack and pinion systems allow for a full turning radius. They are engineered to replace the early long shaft steering box. By mounting the rack on the cradle, they not only reinforce the chassis, but also provide increased ground clearance. The true fixture-welded mounting cradle fits between the frame rails and bolts in place using the original chassis location with no suspension modification. Order the model recommended for your specific application.
( 2 )
$2,125.99
—
$3,262.99
Flaming River 1967-1969 Camaro power rack and pinion cradle kits make it easy to enjoy modern comfort. These direct bolt-in steering kits feature their patented rack and pinion cradle system offering a quick steering ratio with a full turning radius! These power kits are fluid and pressure-tested and certified. Swap out your tired old system and transform your classic muscle into modern muscle you'll enjoy driving. Bolt up Flaming River 1967-1969 Camaro power rack and pinion cradle kits.
( 3 )
$1,739.99
—
$3,432.99
Flaming River 1968-74 Nova Power rack and pinion cradle kits bolt into the existing chassis with no suspension modification. The power rack and pinion provides a quick steering ratio with full turning radius, installs easily using the existing chassis hole locations. They also feature a stronger 1 in. diameter rack gear and more than 6 in. of travel and full turning radius.
Not Yet Reviewed
$2,025.99
—
$2,249.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1965-69 Impala/Caprice power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These systems feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly--no cutting, drilling, or welding is required. (Some models do not include a column and/or power steering pump.) Most kits include: * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley * Floor shift tilt steering column (available on some models)
Not Yet Reviewed
$3,476.99
Steer your classic with American-made Flaming River 1968-72 Chevelle manual rack and pinion cradle kits. Lighter weight-wise, these precision jig-welded cradle kits beef up your frame and neatly install in the stock steering mounting holes--no drilling, cutting, or welding is required! Flaming River uses a unique travel bar system in these Chevelle kits that connect new tubular inner tie rod ends to the original pivot points, reducing bump steer. They come available with or without a tilt column, mounting hardware, universal joints and shafting, and a billet swivel floor mount. Upgrade your classic to modern steering with the easiest, most complete kits--Flaming River 1968-72 Chevelle manual rack and pinion cradle kits.
Not Yet Reviewed
$3,394.99
—
$4,037.99
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,118.99
—
$3,262.99
Replace the early long-shaft steering box in your 1962-67 Nova with Flaming River power rack and pinion cradle kits! These cradle kits mount right into the original chassis locations--no suspension modifications are needed! Flaming River Nova power kits provide a full turning radius, more responsive steering, and install using simple hand tools. You can choose kits with or without columns and for front or rear steer. The front steer reverses the OE steering arms and adds clearance for the use of almost any oil pan. Most power rack and pinion cradle kits include a power steering pump and pulley, a polished aluminum mounting reservoir, and they are pressure/fluid-tested and certified. Get a direct fit with everything you need to upgrade your classic with Flaming River 1962-67 Nova power rack and pinion cradle kits.
Not Yet Reviewed
$2,985.99
—
$3,959.99
Flaming River 1967-72 C10 power rack and pinion cradle kits are complete and direct bolt-in. They feature solid plate 3/8 in. steel for increased strength, and new front steer power tubular-style rack and pinion. The rack and pinion includes .98 in. rack shaft for increased strength and billet servo valve for cooler operation. Kits are Flaming River tested and certified. Available with no pump—or no pump and no column. Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,952.99
Flaming River 1958-60 Impala power rack and pinion cradle kits upgrade your American classic with modern handling. They offer more than 6 in. of travel, provide a full lock-to-lock turning radius, and have an adjustable pinion angle. Plus, Flaming River's patented cradle technology installs in the original mounting holes for the steering box and idler arm assembly—and does not require any cutting, drilling, or welding. These kits feature a travel bar design to properly position the steering pivot points in the original location and deliver the original turning radius. They also utilize a stabilizer guide clamp that provides added stability while driving, and the factory tie rods to connect the travel bar to your vehicle's spindles. Order the model recommended for your specific application. Flaming River 1958-60 Impala power rack and pinion cradle kits include: * Tilt column—paintable or polished * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Polished aluminum mounting reservoir * Power steering pump and pulley
Not Yet Reviewed
$2,872.99
Flaming River 1965-70 Mustang right hand drive power rack and pinion cradle kits update your classic muscle with modern driving comfort. These right hand drive kits are designed to be direct bolt-ins that include everything you need for installation (hoses are sold separately). Flaming River's patented cradle mount technology uses the original chassis hole locations with no modification required. These kits are available with or without a stainless steel tilt steering column, and columns come in your choice of polished or paintable finishes. Flaming River 1965-70 Mustang right hand drive power rack and pinion cradle kits make driving your classic even more enjoyable. Most kits include: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints *.On some models, a steering column, power steering pump, and power steering reservoir are also available
Not Yet Reviewed
$2,598.99
—
$3,339.99
Flaming River 1963-66 Corvette power rack and pinion cradle kits improve horsepower, performance, and road handling. The kits include hardware, universal joints, cradle, and quick-ratio rack and pinion. The all-new components bolt into existing chassis and original mounting locations with no suspension modification, providing a stronger rack shaft, a longer cylinder and overlapping tube design, and more than 6 in. of travel for full-turning radius.
( 1 )
$2,486.99
Flaming River 1965-70 Mustang manual rack and pinion cradle kits steer your classic with the benefits of modern steering systems. Durable, lighter, and more responsive, these cradle kits add strength and support, while offering an improved turning radius. Flaming River includes everything you need to install them, and the welded cradle bolts right into the original mounting locations--no chassis modifications needed. Kits are available with or without columns and all include wiring connectors, universal joints, shaft support bearings, Grade 8 hardware, and their patented rack and pinion cradle system. Update your Pony with comfort from the most complete rack and pinion kits--Flaming River Mustang manual cradle kits.
( 2 )
$2,157.99
—
$3,124.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
