Availability
Showing In Stock Items. Show All 26 Items.
Flaming River 1988-98 Chevy C1500 truck power rack and pinion cradle kits are direct bolt-ins with precision welded cradles manufactured using a 3/8 in. steel plate to assure there is no flexing. Each kit adapts to the original steering column and includes a new slip shaft with U-joints and a hose kit. They have been designed for use with the original power steering pump and the travel bar maintains original geometry. Features: * Designed for use at factory ride height or with 4/6 lowering kit * Solid plate 3/8 in. steel for increased strength * Bolts in place of steering box and idler arm using OE mount locations * Precise, modern steering with no cutting, drilling, or welding to chassis * Features new front steer power rack and pinion * Rack and pinion features .98 in. rack shaft for increased strength * Billet servo valve for cooler operation * Lifetime serviceability and Flaming River tested and certified Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,508.99
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$2,731.99
—
$4,813.99
Flaming River 1967-68 Camaro power rack and pinion cradle kits can upgrade the steering system on your classic musclecar! These direct bolt-on systems are stronger, lighter, and more responsive than original equipment. Like Flaming River's manual setup, the power rack and pinion provides a quick steering ratio with full turning radius. The units install using the existing chassis locations on late '60s Camaros and Firebirds. They're available with or without the steering column.
( 1 )
$2,339.99
—
$2,706.99
Flaming River 1962-64 Galaxie rack and pinion cradle kits are designed for Ford Galaxie and other full size Fords. They provide power steering for modern driving comfort, especially when parking. The cradle mounts in the original chassis location with no chassis modification and the center support does not have to be removed. Kits are available with a choice of either paintable mill or polished stainless steel columns. Kits are available with or without a steering column. Kit includes: * Billet aluminum reservoir * Power rack and pinion cradle system * All Grade 8 mounting hardware
( 1 )
$2,396.99
—
$3,201.99
Swap your steering box setup for a lighter, more responsive modern steering system in your classic. Flaming River 1970-81 Camaro power rack and pinion cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes. The kits include your choice of tilt key columns or no-column, a stronger 1 in. rack gear, a billet-joint and column adapter, mounting hardware, a polished aluminum mounting reservoir, and a power steering pump and pulley. All included to allow you more than 6 in. of travel and a full turning radius. Enjoy driving your classic car with this upgrade-- Flaming River 1970-81 Camaro power rack and pinion cradle kits.
( 2 )
$2,572.99
Replace the early long-shaft steering box in your 1962-67 Nova with Flaming River power rack and pinion cradle kits! These cradle kits mount right into the original chassis locations--no suspension modifications are needed! Flaming River Nova power kits provide a full turning radius, more responsive steering, and install using simple hand tools. You can choose kits with or without columns and for front or rear steer. The front steer reverses the OE steering arms and adds clearance for the use of almost any oil pan. Most power rack and pinion cradle kits include a power steering pump and pulley, a polished aluminum mounting reservoir, and they are pressure/fluid-tested and certified. Get a direct fit with everything you need to upgrade your classic with Flaming River 1962-67 Nova power rack and pinion cradle kits.
Not Yet Reviewed
$3,350.99
Flaming River Impala/Caprice power rack and pinion cradle kits help deliver precision steering on your restoration vehicle. They have a full lock-to-lock turning radius and an adjustable pinion angle. These assemblies also utilize a travel bar design to properly position the steering pivot points to the original location and turning radius. The stabilizer guide clamp provides added stability while driving. Flaming River rack and pinion systems use the factory tie rods to connect the travel bar to your vehicle's spindles. These kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—and no cutting, drilling, or welding is required. Impala/Caprice kits include: * Floor shift tilt steering column * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley
Not Yet Reviewed
$3,598.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1963-64 Impala power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These kits feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—no cutting, drilling, or welding is required. (Some models do not include column and/or power steering pump.) Power rack and pinion kits, designed for a floor shift column, include: * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Aluminum mounting reservoir (hoses sold separately) * Tilt column (available on some models)
Not Yet Reviewed
$2,857.99
—
$3,774.99
Flaming River 1962-67 Nova manual rack and pinion cradle kits are lighter and stronger than your OEM racks. All new parts and American-made craftsmanship create a more responsive steering system for your Nova and installation is easy. Flaming River manual cradle kits offer you a choice of steering columns or no-column, as well as front or rear steer. Kits feature their patented rack and pinion cradle system with full turning radius and bolt-in fit using the original chassis location. Universal joints, shaft support bearings, mounting clamps and hardware are included. Get a grip on modern steering for your classic with Flaming River 1962-67 Nova manual rack and pinion cradle kits.
Not Yet Reviewed
$3,095.99
—
$3,136.99
Flaming River Chevelle power rack and pinion cradle kits offer classic bolt-in technology. These power cradle kits mount in your chassis' existing factory holes--no cutting, drilling, or welding is required--and basic hand tools get the job done easily! Add a lighter, more responsive steering system with a full turning radius to your classic vehicle, with American-made Flaming River Chevelle power rack and pinion cradle kits. Many Chevelle rack and pinion kits are delivered with: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints * Power steering pump * Pulley * Shafting * Reservoir * Billet swivel floor mount * Sway bar for added stability * On some models, painted or polished tilt steering columns are available options
( 1 )
$2,873.99
Flaming River 1955-56 Chevy Power rack and pinion cradle kits deliver precision steering on your restoration vehicle. Their Billet-Power rack and pinion systems allow for a full turning radius. They are engineered to replace the early long shaft steering box. By mounting the rack on the cradle, they not only reinforce the chassis, but also provide increased ground clearance. The true fixture-welded mounting cradle fits between the frame rails and bolts in place using the original chassis location with no suspension modification. Order the model recommended for your specific application.
( 2 )
$2,404.99
—
$2,792.99
Flaming River 1968-74 Nova Power rack and pinion cradle kits bolt into the existing chassis with no suspension modification. The power rack and pinion provides a quick steering ratio with full turning radius, installs easily using the existing chassis hole locations. They also feature a stronger 1 in. diameter rack gear and more than 6 in. of travel and full turning radius.
Not Yet Reviewed
$2,559.99
Flaming River 1964-65 Chevelle Power rack and pinion cradle kits uses a travel bar design to properly position the steering pivot points to the original location and deliver original turning radius. The travel bar system features a stabilizer clamp that provides added stability while driving. This kit uses the factory tie rods to connect the travel bar to the vehicle's spindles.
Not Yet Reviewed
$3,186.99
Flaming River 1965-70 Mustang power rack and pinion cradle kits can upgrade your classic Pony's steering system. The patented conversion kits are stronger, lighter, and more responsive. They also retain the full factory turning radius and offer more travel than your OE system! Mustang power cradle kits feature a welded cradle that bolts right in—no cutting, drilling, or welding is required! They're available to fit with the original or Granada spindles, and come with or without columns that are paintable or polished. Each kit also includes mounting hardware, wiring connectors, universal joints, a power steering pump, a billet bracket and pulley, and a polished aluminum reservoir. All are fluid and pressure-tested before shipping. Order the model recommended for your Mustang application.
( 8 )
$3,174.99
Flaming River's rack and pinion cradle system for the 1966-67 Chevelle uses a travel bar design to properly position the steering pivot points to the original location and deliver original turning radius. The travel bar system features a stabilizer clamp that provides added stability while driving. This kit uses the factory tie rods to connect the travel bar to the vehicle's spindles. It installs (using basic hand tools) in the original mounting holes for the steering box and idler arm assembly, and does not require any cutting, drilling, or welding. Power Rack and Pinion Kit includes: * Tilt column * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Power steering pump and pulley * Shafting * Aluminum mounting reservoir (hoses sold separately) * Billet swivel floor mount * Sway bar for added stability
Not Yet Reviewed
$2,783.99
Flaming River 1958-60 Impala power rack and pinion cradle kits upgrade your American classic with modern handling. They offer more than 6 in. of travel, provide a full lock-to-lock turning radius, and have an adjustable pinion angle. Plus, Flaming River's patented cradle technology installs in the original mounting holes for the steering box and idler arm assembly—and does not require any cutting, drilling, or welding. These kits feature a travel bar design to properly position the steering pivot points in the original location and deliver the original turning radius. They also utilize a stabilizer guide clamp that provides added stability while driving, and the factory tie rods to connect the travel bar to your vehicle's spindles. Order the model recommended for your specific application. Flaming River 1958-60 Impala power rack and pinion cradle kits include: * Tilt column—paintable or polished * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Polished aluminum mounting reservoir * Power steering pump and pulley
Not Yet Reviewed
$2,674.99
—
$3,526.99
Flaming River 1961-62 Impala Power rack and pinion cradle kits deliver over 6 in. of travel, have an adjustable pinion angle, and provide a full lock-to-lock turning radius. The travel bar system features a stabilizer guide clamp that provides added stability and is designed to properly position the steering pivot points in the original location and deliver the original turning radius. They use the factory tie rods to connect the travel bar to the vehicle's spindles. These kits install in the original mounting holes for the steering box and idler arm assembly. Power Rack and Pinion Kit Includes: * Tilt column * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Aluminum mounting reservoir (hoses sold separately) * Power steering pump and pulley
Not Yet Reviewed
$2,872.99
—
$3,477.99
Flaming River 1966-67 Chevelle Power rack and pinion cradle kits uses a travel bar design to position the steering pivot points to the original location and deliver proper turning radius. The travel bar system features a stabilizer clamp that provides added stability while driving. This kit uses the factory tie rods to connect the travel bar to the vehicle's spindles. It installs in the original mounting holes for the steering box and idler arm assembly.
Not Yet Reviewed
$3,331.99
Flaming River 1969-74 Nova power rack and pinion cradle kits are direct bolt-in steering systems that upgrade your classic muscle car. They mount right into the original chassis locations—no suspension modifications are needed! These cradle kits provide a full turning radius, more responsive steering, and install using simple hand tools. Most models also include a power steering pump and pulley, and polished aluminum mounting reservoir. Nova systems are fluid- and pressure-tested and certified. Let Flaming River provide the power steering you want for your 1969-74 Chevy Nova.
Not Yet Reviewed
$3,077.99
—
$3,222.99
Flaming River 1955-57 Thunderbird rack and pinion cradle kits add modern steering to your classic ride. Carefully designed to maintain the full stock steering radius, these Thunderbird rack and pinion cradle systems use a travel bar system to attach the rack gear to the tie rod ends. Flaming River rack and pinion cradle steering systems are precision jig-welded and install in the stock steering system mounting holes. There is no drilling, cutting, or welding required. Cradle kits include paintable mill or highly polished tilt column, universal joints, power steering pump with billet bracket and pulley, polished aluminum mounting reservoir, and the patented rack and pinion cradle system. Let Flaming River steer you safely in the right direction with their Thunderbird rack and pinion cradle kits.
Not Yet Reviewed
$4,333.99
—
$4,827.99
Flaming River 1967-72 Chevy C-10 power rack and pinion cradle kits are an upgrade from your classic truck's original steering system. Their front steer power tubular-style rack and pinion features .98 in. rack shaft for increased strength and billet servo valve for cooler operation. These units are available with or without a GM-style steering column.
Not Yet Reviewed
$2,758.99
—
$3,249.99
Flaming River 1967-1969 Camaro power rack and pinion cradle kits make it easy to enjoy modern comfort. These direct bolt-in steering kits feature their patented rack and pinion cradle system offering a quick steering ratio with a full turning radius! These power kits are fluid and pressure-tested and certified. Swap out your tired old system and transform your classic muscle into modern muscle you'll enjoy driving. Bolt up Flaming River 1967-1969 Camaro power rack and pinion cradle kits.
( 3 )
$2,288.99
—
$3,350.99
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,808.99
—
$3,405.99
Flaming River 1960-65 Comet/Falcon power rack and pinion cradle kits add modern steering to your classic! These conversion kits require no cutting, drilling, or welding; they simply bolt into your vehicle's original mounting holes using basic hand tools. The units provide more than 6 in. of travel and a full turning radius—and are available with a floor shift or column shift tilt steering column, or no column at all. Flaming River power rack and pinion cradle kits are fluid- and pressure-tested before shipping. Order the model recommended for your Comet, Falcon, or Mercury application. Kits include: * Rack and pinion cradle system * Mounting hardware required for installation * Wiring connector * Universal joints and shafts * Power steering pump and pulley * Polished aluminum mounting reservoir
( 4 )
$3,078.99
—
$3,534.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
