Availability
Showing In Stock Items. Show All 31 Items.
UMI Performance panhard bar relocation kits are designed to replace the upper rod support while relocating the lower panhard bar. By doing so, this offers enough room to run up to a 3 in. true dual exhaust system over the passenger side axle. UMI Performance panhard bar relocation kits include a new heavy-duty 1 1/4 in. upper support bar, CNC-machined mounting brackets, and all needed Grade 10.9 hardware. These relocation kits will work with the factory panhard bar and most aftermarket panhard bars.
( 9 )
$189.99
Heavy-duty BMR panhard bar relocation brackets bolt to existing mounting holes without welding or drilling. BMR brackets install simply without affecting rear-end geometry and provide the additional clearance you need to complete your project. They come available in black hammertone or red powdercoated finishes.
( 25 )
$69.95
—
$119.95
Rock Jock rear trac bar relocation brackets are highly recommended upgrades for lifted vehicles to relocate the axle housing mounting point of the rear trac bar upward, correcting the location of the trac bar mounting point. Necessary on lifted vehicles that feature heavy additions above the roof or behind the tailgate, the addition a Rock Jock bracket will restore rear suspension lateral geometry and produce better overall vehicle handling by raising the rear suspension roll center to bring it closer to the vehicle's center of gravity. Rock Jock kits are completely bolt-on, work with factory or aftermarket trac bars, and install onto the factory axle housing. A rear brake line relocation tab is included to provide clearance for the new trac bar bolt location. Each bracket is finished in semi-gloss black and includes all necessary hardware for installation.
Not Yet Reviewed
$114.00
Skyjacker track bar brackets are designed to keep your front suspension working correctly throughout its travel range. They are available for lifted vehicles, or vehicles that need to relocate the OEM track bar.
( 7 )
$29.00
—
$337.17
Looking to give your truck or Jeep that little extra boost for 35 in. tires? Replace your track bar frame mount to accommodate the extra lift to keep your front axle and suspension components centered. BDS Suspension heavy-duty replacement track bar relocation brackets bolt on and correct the track bar angle to keep it in phase with the steering linkage for optimal handling. Brackets are available to accommodate different lift heights using a slotted track bar mounting hole and offset cam locks. Choose the BDS brackets designed for your truck. Features: * Bolt-in replacement bracket for OE frame bracket * Offset cam locks allow the track bar recenter axle at a range of lift heights * 1/4 in. steel construction, fully welded * Finished in durable textured black powdercoat
( 1 )
$54.95
Allstar Performance bolt-on track bar locator brackets are ideal bolt-on mounting points for rod ends commonly found on panhard bars, track bars, or rear axle housing track locators. They are for use with 1/2 in. diameter rod ends, and are available with a 5/8 in. or 3/4 in. bracket mounting hole.
( 4 )
$7.99
—
$8.29
Steer Smarts YETI XD track bar relocation brackets are designed to correct the geometry of the track bar on Jeeps that are equipped with a top-mounted draglink. These easy bolt-on solutions will ensure that the track bar and top-mounted dragline are properly aligned and aid in the reduction of bump steer. Street Smarts YETI XD track bar relocation brackets are fabricated from 1/4 in. thick steel and e-coated for maximum durability. They include all necessary hardware and installation takes just minutes with basic hand tools.
Not Yet Reviewed
$159.00
—
$169.00
These ReadyLift Suspension track bar brackets are designed to keep your front suspension working correctly throughout its travel range. They're available for lifted vehicles, or vehicles that need to relocate the OEM track bar. The brackets are manufactured from durable steel and then black powdercoated for protection. Keep your truck handling well with one of these ReadyLift Suspension track bar brackets.
( 2 )
$99.95
—
$249.95
Artec Industries provides a choice of track bar brackets to meet your needs for your application. Their selection includes raised or stock styles for front and rear axles. They are heavy-duty 1/4 in. thick precision-cut and formed components designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. Some improve ground clearance and some improve link geometry, but all Artec track bar brackets are superior to your factory parts.
( 2 )
$87.99
—
$100.00
Classic Performance Trac Bar mount components are available for several Chevy trucks from the '60s and '70s. From track arm mount studs, to frame mount nuts and bolts, you can find the brackets and hardware needed for your vehicle application.
Not Yet Reviewed
$7.99
—
$25.99
TeraFlex track bar axle brackets are offered in several styles to fine-tune your Jeep's suspension. Available for front and rear applications, the brackets are constructed from heavy-duty steel, then accurately cut, bent, and pre-drilled to ensure proper positioning on your vehicle. The tough black powdercoat finish ensures durability. TeraFlex front models help correct steering geometry to eliminate bump steer and other front-end issues. The rear models can correct roll center, restore factory handling, and/or reduce body roll on lifted vehicles.
Not Yet Reviewed
$102.99
—
$127.99
Tuff Country's track bar brackets are designed to return axles to their proper position on lifted vehicles. They're available for several applications and lift heights to suit your needs.
( 12 )
$66.99
—
$313.99
Many sport truck owners modify various powertrain components, which often requires hardware like the Belltech track bar relocator brackets. These steel driveline alignment accessories are contained in a kit with spacers, shims, washers, nuts, and bolts. The track bar brackets are black powdercoated for rust protection and install easily on your chassis. Check the specs to see if there's a Belltech kit that fits your truck.
( 3 )
$59.00
Steer Smarts offers Yeti XD frame side track bar reinforcement brackets for a variety of applications, including many Jeep Wrangler and Gladiator models from 2007 and up. These replacement parts are engineered to bolt onto the stock track bar mount on the frame. They reinforce this mounting location to keep the mount from breaking off or deflecting under stress. Additional notes: * Easy bolt-on installation * 1/4 in. wall steel * All fasteners included * E-coated for corrosion resistance
Not Yet Reviewed
$169.00
UMI Performance panhard bar lowering/leveling kits are designed to increase over-the-axle exhaust pipe clearance, as well as to lower and level the panhard bar. These competition-proven setups include weld-in reinforcement plates for the factory panhard bar mount, and adjustable struts to prevent lateral movement of the bracket system. Laser-cut adjustment slots permit lowering and leveling the panhard bar for roll center height and performance tuning. UMI Performance panhard bar lowering/leveling kits give much of the performance of a Watts Link with easier installation and adjustment. They're available in red or gloss black powdercoat finishes. Additional notes and features: * For use with factory axle only * Lowers rear roll center height 1 3/4 in. to 4 in. in 7/16 in. increments * 100 percent bolt-in for street use; welding required for competition use * Upper panhard bar brace built using 1.250 in. USA DOM tubing * CNC laser-cut bracketry throughout * Exclusive weld-in reinforcement plate (required for competition use) * Adjustable panhard bar height and leveling
( 1 )
$399.99
Artec Industries APEX raised heavy-duty track bar brackets are designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. They are 1/4 in. thick, precision-cut and formed to outperform the competition. These mild steel brackets are for use only with APEX truss or no truss applications. They will NOT work with first generation Artec trusses. Features and notes: * Integrates with new APEX truss for JK. Not for use with Artec trusses prior to Nov. 2019 * Replaces factory bracket for those with 2.0 in. lift or higher * Lifts factory sway bar mount 1.75 in. * Adjusts roll center 3 in. higher for greater stability * Allows rotation of steering dampener to top side of tie rod for greater clearance * Improves ground clearance over factory brackets * This kit requires general welding and fabrication skills. Artec Industries implies no guarantees or warranties, and is not liable for improper installation. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. NOTE: These brackets offer raised track bar holes at 3.0 in. The brackets are for use with a drag link flip (which requires a new track bar, minimum 3.0 in. lift and bump stop extensions). These brackets have nothing to do with your lift amount. * If your lift replaces your track bar and mounts to the factory axle bracket (typical with a lift that includes an adjustable track bar), choose a stock height replacement bracket.
Not Yet Reviewed
$87.99
Artec Industries APEX heavy-duty stock track bar brackets are designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. They are 1/4 in. thick, precision-cut and formed to outperform the competition. These mild steel brackets are not for use with 1st generation Artec trusses (prior to Nov. 2019). Features and notes: * Integrates with new APEX truss for JK applications (late 2019-up) * Replaces factory bracket to prevent death wobble or other issues * Lifts factory sway bar mount 1.75 in. * Allows rotation of steering dampener to top side of tie rod for greater clearance * Improves ground clearance over factory brackets * If your lift replaces your track bar and mounts to the factory axle bracket (typical with a lift that includes a track bar), choose this bracket. If you are doing a drag link flip (minimum 3.0 in. lift needed for flip), choose a raised height bracket * This kit requires general welding and fabrication skills. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Some grinding and fitment may be required when installing this kit. Every axle varies slightly, and some fabrication may be required.
Not Yet Reviewed
$65.99
Rust Buster rear upper track bar brackets help to replace the body mounts on your vintage Jeep. The rear upper track bars are made from durable steel, and utilize the latest in CAD design to model each of the repair sections before being laser cut, formed and finish welded. The EZ-fit design allows the repair section to slide onto the frame, and includes all the factory needed holes and mounting locations. These rear upper track bar brackets by Rust Buster will help get your Jeep back on the road with a renewed life.
Not Yet Reviewed
$84.99
—
$99.99
Rough Country's vehicle-specific track bar relocation brackets are designed to help restore proper geometry of certain suspension components on lifted Jeeps and select Dodge trucks with a front suspension lift. The brackets are engineered to accommodate the difference in height by essentially relocating where the track bar connects to the track bar mounting point on the axle. Rough Country's track bar relocation brackets utilize a unique design that braces the mounting point by connecting to the axle tube and is fortified by a heavy-duty U-bolt. This design offers unparalleled protection, especially for off-road applications, by circumventing the track bar mounting point on the axle, as well as increases the lifespan of these sensitive suspension parts. Order the track bar relocation bracket or kit designed for your application needs. Product features and benefits: * Application-specific brackets * Steel construction with black powdercoat finish * Select kits with extended pitman arm allow you to drop the drag link, thus promoting a longer lifespan for tie rod ends * Easy bolt-on installation
Not Yet Reviewed
$39.95
—
$99.95
On Sale
RSO Suspension's track bar axle brackets correct the roll center, restores the factory handling, and reduces the body roll. The brackets eliminate the need for a custom aftermarket adjustable track bar. Multiple mounting locations allow customizable lateral alignment of your factory rear track bar, correcting suspension geometry on JL and JLU models with a lift. Product features and details: * For Wrangler JL and JLU models with 2.5 in. to 4.5 in. suspension lift * Bolt-on steel bracket is black powdercoated and hardware is zinc plated for protection from corrosion and debris * Allows custom lateral alignment along the rear axle * Corrects roll center and restores factory handling to extend the life of tires, shocks, and bushings * Multiple mounting locations for custom lateral alignment of OE track bar, includes all necessary mounting hardware
Not Yet Reviewed
$102.99
$92.69
Another extensively-tested and superior Trail-Gear suspension product, Trail-Link anti-wrap track bar mounts are user-friendly, strong, and more affordable than you ever imagined. These mounts complement Trail-Gear's three link suspension kits.
Not Yet Reviewed
$82.24
TeraFlex track bar frame brackets allow you to fine tune and eliminate suspension issues on your Jeep. The strong steel brackets feature a black powdercoat finish for added durability and lasting good looks. When the frame side of your track bar needs to be lowered, restored to its natural position, or have the angles tweaked to eliminate bump steer, TeraFlex robust brackets will do the job.
Not Yet Reviewed
$46.99
—
$386.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
