Availability
Convert your floor jack into a transmission jack. These Performance Tool transmission floor jack adapters are designed for use with any floor jack using a removable 1 5/32 in. saddle shaft. They tilt forward and back and include a safety chain.
( 27 )
$94.99
Hi-Lift Off-Road bases make the original Hi-Lift Jacks even more versatile. These bases are convenient to use, and easy to store. Their rugged construction meets Hi-Lift Jack specifications for strength and durability. They're designed to alleviate jack sinkage on soft ground.
( 13 )
$43.79
Rugged, polyurethane handle keepers from Hi-Lift Jack Company are designed to hold the Hi-Lift handle to the upright steel bar. This keeps it in place, when not in use, to help eliminate rattling during transportation. They are quite easy to use--just slip them on and off over the Hi-Lift top clamp-clevis to allow for proper usage with your Hi-Lift jack.
( 33 )
$19.99
—
$21.99
When in situations where traditional jack stands won't fit, get in the way, or may damage your expensive floors, AGM Products universal jack rod stands are the perfect replacement option! Turn your existing floor jack into a SAFE jack stand with the push of a lever. These units are designed to work with most floor jacks—and are great for shops, the track, test sessions, or roadside repairs. Product specs: * MAX LOAD: 2 tons * LENGTH: 8 in. compressed, 14 in. extended * WEIGHT: 3.2 lbs.
( 4 )
$99.98
—
$139.99
These TCI floor jack transmission cradles are for use with the typical hydraulic floor jack that has a removable pad with a 1-3/8" center hold. Remove the pad and replace it with the transmission cradle and you have a secure 12 in. x 12 in. surface to hold the transmission steady during installation or removal. Three sides have a one-inch lip to keep the transmission in place, and a front opening for sliding the transmission on and off the engine dowel pins.
( 19 )
$81.95
Sunex Tools transmission jack fuel tank adapters help with the removal, installation, and moving of emptied automotive gas tanks. Designed for use on all under-hoist transmission jacks, these fuel tank adapters offer quick and easy installation to all ratcheting finger transmission jack saddles and include a universal adapter plate for all other saddles. The adapters feature foam support pads that can be adjusted for height, width, and length to fit any 40 gallon gas tank configuration. They also include a ground wire assembly to prevent static electric discharge on older metal tanks, and two 8 ft. tie-down straps to secure the tank to the adapter.
( 3 )
$355.99
No more wood blocks! Daystar heavy-duty jack pads are available in multiple sizes to help protect your vehicle's paint and/or detailed chassis from those scratch-happy metal jack saddles. They are made from strong and rugged polyurethane to ensure you get a product built to last—and they're covered by Daystar's exclusive GO EVERYWHERE Lifetime Warranty. Protect your pinch weld areas and painted areas with the easy placement, removal, and storage provided by Daystar heavy-duty jack pads.
( 2 )
$22.06
—
$27.99
AC Hydraulic GS1 floor jack rubber cushions are made from durable rubber material, and are designed to be used with any of AC Hydraulics' floor jacks or the T3 cross beam adapter to prevent damage to both underbody jacking points and other components whilst lifting your vehicle. Improve car body protection using these GS1 floor jack rubber cushions from AC Hydraulic.
Not Yet Reviewed
$26.40
Hi-Lift Lift Mates are designed to allow the vehicle to be lifted directly from the wheel. This greatly reduces the amount of travel up the jack bar needed to lift the wheel to an adequate and safe height. They feature rubber-coated safety hooks to protect the wheel, a rubber pad to protect the wheel, and a 5,000 lb. load capacity.
( 12 )
$41.99
Protect that freshly painted or detailed chassis from jack assault! Summit Racing™ jack pads are precision-fabricated in the USA from durable rubber or specially-formulated polyurethane and are designed to fit as a "cushion" on the top a floor jack or jack stand They're strong enough to withstand the weight of your vehicle, yet soft enough to protect the frame from metal-on-metal contact. Order the material and diameter you prefer.
( 28 )
$5.99
—
$19.99
Having a flat tire or just needing to jack up your vehicle to do everyday maintenance can be a worrisome experience when trying not to mess up the delicate undercarriage. Auto Accessories of America pinch weld jack pads are large, slotted units with rare earth magnets, so you will know your car is secure. And they have a nylon insert that won't scratch or damage your welding. Features: * Neodymium magnets for supreme holding strength * Supports most cars with pinch welding * Aircraft-grade billet aluminum construction, anodized for protection * Engineered to meet or exceed OEM specifications
Not Yet Reviewed
$24.99
These Summit Racing™ black foam jack pads protect your ride--and you--from accidental jack handle bumps. It measures 17.50" long, has a 1.25" inside diameter, and stretches to fit most jacks.
( 18 )
$9.99
Powerbuilt All-in-One/Unijack pinch weld saddle adapters prevent bending or crushing the pinch welds of your vehicle during lifting. Made from extruded rubber, these saddle adapters easily install onto the existing riser saddle of both the Powerbuilt All-in-One and Unijacks. The high-density rubber material is cut perfectly to fit all pinch weld applications, helping your vehicle to not only avoid metal-to-metal contact, but will also provide a more secure and stable contact with the vehicle during lifting. Simply slide the saddle adapter onto the existing saddle and you're ready to lift safely. Note: You will still need to adhere to the capacity, capabilities, and warnings of the jack being used.
Not Yet Reviewed
$6.99
AC Hydraulic T3 floor jack crossbeams can be used with AC Hydraulic floor jacks, allowing you to change out both of the front or rear wheels at the same time or service the suspension system with ease. The crossbeams have a steel construction and telescopic arms with a reach from 29.33 in. up to 45.28 inches and offers an impressive total lifting capacity of 2,200 lbs.!
Not Yet Reviewed
$212.80
Allstar Performance offers quality replacement components for use in conjunction with the Allstar air jack kits, such as these Hi-Pressure regulators. The steel/brass nitrogen regulators, with a delivery pressure of 10-500 psi, feature two easy-to-read gauges and a T-handle with a pressure-adjusting screw. They're designed for use with Allstar Performance air jack kits ALL11300 and ALL11302.
Not Yet Reviewed
$239.99
Hi-Lift Jack bumper lifts are designed to fit most steel curved bumpers, for quick and easy lifting.
( 7 )
$32.99
OTC's automatic transmission adapters are the perfect solution for those hard-to-install transmissions. They're made from durable materials to ensure performance.
( 1 )
$236.99
—
$672.99
The AC Hydraulic AS1 transmission gearbox saddles are for use for passenger vehicles. These transmission gearbox saddles are fitted with two sturdy straps and two rubber cushions with magnets and offer 10 degree tilt in all directions for precise dismounting and re-mounting of gearboxes.
Not Yet Reviewed
$547.20
These Prothane Jack Pads are designed to protect anything that you may be jacking up. They are made from polyurethane for durability and come in the standard Prothane red color.
( 29 )
$6.74
—
$88.62
AC Hydraulic FDK1 floor jack extensions attach to the lifting pad of your AC Hydraulic floor jack to accommodate vehicles with higher clearance. The FDK1 floor jack extensions have a steel construction and are designed to give you an additional 100mm of clearance for hard to reach jack points.
Not Yet Reviewed
$59.20
OEM Automotive Tools floor jack crossbeams will make your standard garage floor jacks better. When used in conjunction with your floor jacks, these crossbeams can greatly reduce the chance of undercarriage metal damage, and will provide stability for the entire front, rear, or side of the lifted vehicle. OEM Tools floor jack crossbeam features: * Compatible with any floor jack that has a 1 1/8 in. diameter saddle stud * Saddles adjust from 23 in. to 32 in. on-center * Threaded pad design provides an additional 2 in. adjustment * Rubber lift pads increase stability * Lifts front-wheel drive vehicles without axle beam * Use to lift cars at rocker panels for simultaneous wheel service * Heavy steel construction for maximum durability * Weight capacity at minimum to maximum width is 3,000 lbs. to 4,000 lbs.
( 3 )
$265.99
Daystar's new polyurethane Hi Lift jack isolator secures the handle on your Hi-Lift jack when the jack is not in use, and makes transporting your Hi-Lift jack much quieter and easier. These 1" thick cast polyurethane blocks fit perfect and simply slide over the jack handle and the jack's I-beam to keep them secured together while traveling down those bumpy roads. No more rattling or lost jack handles! Daystar isolators fit all Hi-Lift brand jacks.
( 5 )
$16.54
Hi-Lift Jack Protectors will keep your jack away from the elements. They are waterproof, as well as mildew and decay-resistant.
( 2 )
$34.99
OTC powertrain lift differential adapters mount to your OTC 5295 powertrain lift table for proper handling of differential axle assemblies during service. Two axle tube stands support each side of the axle housing while the highly-versatile pinion adapter's reversible head stabilizes the differential by not allowing it to rotate. All OTC powertrain lift differential adapters feature height adjustability and hook points for attaching hold-down straps to keep your axle assembly firmly positioned. Product features, items, and specs include: * Capacity of 800 lbs. * (2) Axle housing stand assemblies * Pinion stand assembly * (12) Hex head cap screws * Hold-down safety strap * Axle housing stands height range is 7 in. to 9 1/4 in. * Pinion support height range is 6 1/2 in. to 10 1/2 in.
Not Yet Reviewed
$999.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
