Availability
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$1,399.99
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 38 )
$1,149.95
—
$1,299.95
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$1,210.95
—
$1,255.95
Holley modular Ultra Lo-Ram intake manifold kits feature a design custom-made for LS engines equipped with LS cathedral port cylinder heads, as well as OEM or aftermarket models. They provide an ideal solution for forced-induction (supercharged or turbocharged) engine applications and select throttle bodies—plus the base intake manifold features a lower overall height to fit under a stock or mildly modified hood. The included fuel rail kits come with two sets of brackets: a set for long (usually standard length) fuel injectors and a set for short (such as Pico or LS7) fuel injectors. The Holley LS modular Ultra Lo-Ram EFI intake manifolds best suited for your application also allow the use of front-feed plenum entry. More product features, items, and notes include: * Designed for forced-induction engine applications with peak power at 7,000 to 8,000 rpm (depending on the application) * Intake design facilitates custom inlet duct and throttle body placement * Allows design and fabrication of special throttle body adapters or inlet ducts for custom installations * Different finishes available for the best look to match your ride * Mounting hardware * With forced induction and the short runner length, the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger you use
Not Yet Reviewed
$999.95
—
$1,049.95
The Trinity Series intake manifolds is BTR's latest offering in high-quality cast aluminum intake manifolds for LS7 engines. Their short runner, 3-piece design allows for the ultimate in application flexibility and is similar in concept to billet intakes costing thousands more. Optimum operating range is 6000-8500 rpm and is primarily intended to bridge the gap between N/A and Boosted applications. These intake manifolds utilize the high LT1 throttle body position and accepts DBW or cabled throttle bodies, yet will fit in the tight confines of the C7, C6, C5 Corvette, as well as the popular F-body platforms. BTR Trinity Series intake manifolds come semi-assembled and includes all hardware required to bolt it on. Additional features: * Available in choice of silver or black satin texture powdercoat finishes * Design incorporates two runners and an interchangeable plenum * Both the port mouth radius and the port match are CNC-machined * Seal is generated by eight entrapped O-rings at the runner/plenum interface and is clamped by M6 stainless steel socket head cap screws * Port seals are achieved SAE O-rings seated in a dovetailed O-ring groove * Incorporates two ports on the side of the throttle body boss and on the rear * Runners and plenums can be purchased separately
Not Yet Reviewed
$824.99
—
$929.99
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$649.95
—
$1,249.95
The FAST LSXHR intake manifolds are available for LS3 rectangular port applications, as well as LS7 raised rectangular port applications. These units are the industry's first polymer tunnel ram-style intake manifolds—and are ideal for generating maximum power in boosted and naturally aspirated engines. Order the model designed for your application. Features include: * Standard "tall" stacks are interchangeable with separately purchased "medium" and "short" stacks to find the most powerful combination * Polymer construction is lightweight and high strength to eliminate power-robbing heat soak commonly found in aluminum intake manifolds * Average 30 hp gain between 5,000 and 7,500 rpm over competitors' high-ram intake manifolds * Rated for up to 45 psi of continuous pressure * Compound fuel injector angle aims spray pattern for ideal atomization, resulting in maximum power production and superior drivability * Reversible top allows for forward- or firewall-facing throttle body installations * Two nitrous nozzle bosses per runner for clean and easy direct port system installations * 103mm throttle body opening can be ported to 105mm
( 7 )
$1,325.95
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$786.95
—
$949.95
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$479.95
—
$549.95
FAST LSXRT intake manifolds are designed specifically for GM truck engines (4.8L, 5.3L, and 6.0L) and LS1, LS2, and LS6 race applications where hood clearance is not a concern. FAST LSXRT 102mm intake manifolds follow the path chartered by the original FAST LSX Gen III intakes by featuring a modular design that allows for easy porting and disassembly and a runner design that yields an incredible 25 peak horsepower gain over the stock intake (on a stock 6.0L engine with a Big Mouth 102mm throttle body). Similar to the LSXR 102mm intake manifold for cars, the LSXRT features the ability to remove individual runners for modification. LSXRT's are constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak propensity. While they feature a 102mm air inlet that was designed for the FAST Big Mouth 102mm throttle body, they can also be used with stock 90mm or aftermarket 92mm throttle bodies (78mm three-bolt throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body.
( 10 )
$1,301.95
Holley EFI LS Mid-Rise intake manifolds are designed for your high performance race engine. They're an excellent choice for street and performance street/strip applications. They're intended for big cube and high-rev applications without height limitations. The modular design of these manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Mid-Rise intake manifold bases from Holley.
( 7 )
$1,099.95
—
$1,149.95
Summit Bucks
Performance Design XS intake manifolds break the mold of existing intake manifold architecture to maximize available space under the hood. When designing the optimum intake runner length and shape, the fuel rail gets in the way—so they moved it—inside the intake manifold! Those billet fuel rails feature an external quick-disconnect near the stock location. Testing proved these models, featuring injection-molded, glass-reinforced nylon construction, made horsepower and torque gains on a stock engine—with increasing gains as the engine got more aggressive with camshaft and exhaust upgrades! Other product features and specifications include: * Modular runners with three staggered lengths for best performance * Forward-facing throttle body flanges (90-101mm, 103mm, and 112mm) * Full assembly can be reversed on the engine * Fits under the cowl hood of a C6 Chevy Corvette * Factory MAP sensor location * PCV and canister purge solenoid OEM connections * Accepts standard EV6 LS3/LS7-style injectors * Injector extension wires pass through sealed grommets * Maximum recommended boost is 20 psi * Carbon fiber center bolt cover * Includes stainless steel hardware for installation * Includes molded port, plenum, and throttle seals
Not Yet Reviewed
$999.99
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
Not Yet Reviewed
$449.95
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$736.95
Trick Flow® R-Series single plane intake manifolds for GM LS3 bring the simplicity of carbureted-style aspiration to GM's late model aluminum powerhouse. The intakes are engineered to produce supreme power in heavily modified engines with 3,500-7,500 plus RPM powerbands. Other significant features include A319 aluminum construction, a one-piece spider-type design, high-flow individual runners combined with a raised plenum floor, custom machining for fuel injection nozzles, and extra material for custom porting. The manifold accepts standard Bosch and Siemens type fuel injectors. Overall height to the mounting pads is 6.285 in.
Not Yet Reviewed
$449.99
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,449.95
$797.95
—
$1,449.95
On Sale
FiTech Nitro-Port Series cast intake manifolds are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. These manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$715.00
$643.50
Edelbrock Cross-Ram LS3 intake manifolds are ideal for anyone looking to combine great looks and outstanding performance between 1,500 - 7,000 rpm. The unique dual-plenum design features 13" long runners with flanges that will accept two, 90mm GM LS3 throttle bodies. The unique cross-ram dual-plenum design is ideal for twin turbo applications. When matched with high flowing air filters and inlet tubes, the dual-plenum system gives neck-snapping performance with plenty of options for engine builders and tuners. The manifolds are available in multiple finishes for that custom look.
( 2 )
$1,795.95
Our Summit Racing Max EFI LS intake manifolds feature a curved edge design with a large 9.7-liter plenum, for maximum flow and horsepower. They are available in both tall and low-profile, and satin or black anodized finishes. They include gaskets, mounting hardware, and a billet fuel rail kit.
( 8 )
$499.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 33 )
$429.99
$329.99
—
$427.99
LS Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.
( 1 )
$1,521.95
BTR Equalizer 3 intake manifolds are low-profile, high performance intakes. Cast from 319 aluminum, these Brian Tooley Racing manifolds are designed for combinations that are looking to make peak power between 6,000 and 8,000 rpm. Boosted engine combinations are actually more reliable making peak power in this higher rpm range, compared to making peak power around 6,500 rpm like most stock-style intakes, provided the valvetrain is engineered properly. Features and specifications for Equalizer 3 manifolds: * O-ringed port openings and lid surface * Easy insert steep chamfer injector bores for trouble-free injector O-ring insertion * Underslung plenum design for maximum hood clearance * 102mm profiled throttle bore * 1 map sensor location in rear with 1 additional user optional locations * LS3 map sensor bore * ISO9001:2015 certified machining * 2-piece design for easy porting access * Lightweight CAD generated design * Profiled port openings for optimum out of the box performance * All threads are roll form aircraft standard DSDV * Clears F-body cowls * Clears C5 cowls with minimal massaging to intake
( 3 )
$779.99
—
$829.99
These Edelbrock Super Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 10 )
$698.95
—
$919.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
