Availability
Showing In Stock Items. Show All 67 Items.
Tanks Inc. fuel pump assembly plates are necessary components when installing your GPA fuel pumps. These hangers come equipped with a wiring harness and 1/4 in. NPT supply and return line.
( 5 )
$104.99
—
$107.99
Radium Engineering's Venturi jet pump kits are designed for high-flow aftermarket pumps and includes three different Venturi orifices to match a wide range of pump flow rates. The Radium jet pump is an effective device for drawing fuel from one side of a fuel tank to the other. Fuel flowing through the venturi creates vacuum in the perpendicular port. The Venturi jet pump uses a machined aluminum housing that is anodized, and laser engraved. Kit includes three interchangeable orifices that were precisely calculated, and vacuum pressure tested with multiple pump combinations. All hose barb connections are compatible with 5/16 in. or 3/8 in. ID hose. Also, the crossover siphon port can be easily adapted to common hoses as it uses 6AN ORB (9/16 in.-18 O-ring) female threads.
( 1 )
$85.45
RCI fuel pump hangers fit all RCI EFI universal in-tank, pump-ready aluminum cells and most universal clamp-on pumps. These 16-bolt hangers have an adjustable pump height from 7 in. to 12 in. RCI fuel pump hangers include: * #8 fuel pickup to pump * #8 fuel return * 16-bolt gasket * 16-bolt in-tank stud ring * Two pump retainer clamps * 16 locknuts * 16 nylon washers
Not Yet Reviewed
$142.99
Holley electric fuel pump extensions are extended length brackets for longer depth installations. These longer brackets and tubes are for tank depths between 12 and 15 in. Install your in-tank fuel module with the assistance of Holley fuel pump extensions.
( 2 )
$76.45
Aeromotive Phantom fuel pump extensions provide additional length for use in tanks deeper than specified sizes when using the Aeromotive Phantom fuel pump systems. Avoid unnecessary fabrication when you order the Aeromotive Phantom fuel pump extensions best suited for your application.
( 1 )
$268.95
—
$279.55
Keep your vehicle's fuel system running smoothly with an ACDelco fuel pump strainer. These replacements help prevent small debris and grit from entering the fuel pump and its mechanisms so you can enjoy optimum performance. The strainers are available in a wide range of sizes for fitment on thousands of vehicles from the 1970s and up.
( 4 )
$157.99
FASS Fuel Systems HD Series replacement pumps will help restore your fuel/air separation system to optimum performance levels. They require no removal of the filter assembly to install—only the replacement of the pump housing. These heavy-duty pumps are easy to install, with a pump housing, motor, and T-block assembly included. They offer the easiest fuel system repair you could want, with no plumbing required. Order the model designed to replace your original equipment.
( 8 )
$275.50
—
$299.25
Radium Engineering fuel pump hangers permit the use of one, two, or three aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. Features include: * Drop-in OEM replacement * 8 AN male pump outlet * 6 AN male return inlet * Fuel starvation protection * High current electrical hardware * Compatible with various pumps (Walbro, AEM, etc.) * Anodized aluminum construction To simplifying aftermarket -AN hose plumbing, the 10 AN ORB threaded feed port features a low-profile 8 AN male fitting, and the 8 AN ORB threaded return port features a low-profile 6 AN male fitting. To reconnect the OEM return and vent hoses, 8.5mm barb fittings are also included. No permanent modification to the OEM fuel tank access cover is required. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low-profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation. Nonconductive acorn nuts are provided to prevent any accidental short circuits. The high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. One issue with all Supra fuel pump hangers is the lack of fuel starvation protection. In these kits, the flow from the FPR return line powers a Radium jet pump. Using a venturi-effect, this "mechanical" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.
( 1 )
$218.45
—
$617.45
Peterson Fluid Systems designed their R4 pump with a rear drive design that saves you weight and money. They offer adapters for all of the popular power steering and fuel pumps designed to be run off the back of the pump. The adapters are CNC precision-machined from 6061 T6 billet aluminum and bolt directly to the R4 pump.
Not Yet Reviewed
$45.79
BD Diesel VE pump fuel pin kits are designed for your 1988-93 Dodge Cummins with a VE pump. These fuel pins are made from durable chromoly steel hardened to factory specifications and precision-ground. The included Bosch 1.9mm bushing gives you even more power. The combination of the pin and bushing adds roughly 30 additional horsepower and 80 ft.-lbs. of torque. With the governor spring installed, you will increase your available power band by roughly 500 rpm and increase hp by another 10 hp over the fuel pin.
( 2 )
$202.95
Keep the power going strong for your street rod or muscle car with quality components like these Aeromotive fuel pump replacement strainer and gasket kits. Designed for Aeromotive's Phantom 200 and 340 Stealth fuel systems, they help keep those setups functioning at optimum capacity performance. Fuel your passion with an assist from Aeromotive fuel pump replacement strainer and gasket kits! More product features, items, and specifications include: * Complete filter/gasket service kit for Phantom 200, 340, and carbureted pump kits utilizing genuine Aeromotive regulator service parts (not designed for other Aeromotive Phantom systems) * Replacement sealing washers and nyloc-style sealing nuts * Known compatible kits include 18688, 18689, and 18201
( 5 )
$45.60
Holley HydraMat fuel pump adapters attach directly to the fuel pump body with no modifications. The design focus was to allow easy connection to a remote fuel pickup or HydraMat within your tank or fuel cell. These patented clamp-on adapters feature 6160 T-6 aluminum construction, include an O-ring to seal the fuel pump to the adapter, and are available in four sizes to fit the 255, 340, and 455 lph pumps, as well as the VR Series pumps and other popular brands of the same size.
( 2 )
$66.55
MagnaFuel products are shaped for enhanced flow--made from high-quality aluminum to eliminate sharp edges that cause aeration and flow losses. Their electric fuel pump replacement components deliver high-end features and race-proven durability in a system that's affordable to all racers: Street and Pro. MagnaFuel parts include filters, kits, O-rings, wear plates, fittings, and mounting brackets. Find the particular fuel pump component you need to correct any problems with your system.
( 8 )
$8.99
—
$19.99
The Edge VP44 tap caps for 1998.5-2002 Dodge 24 V Cummins make a straightforward and solid connection with your VP44 pump wire, making installation of your tuning devices even easier. Pair this fuel pump cover with the Edge Comp Box or Juice with Attitude module for the ultimate performance from your injection pump. This system ensures a proper connection with the pump wire for a secure and sealed connection for long-term dependability and performance onto the VP44 injection pump. Product Overview: * Easy 15-minute installation * Securely taps pump wire * Includes all required hardware * Excellent addition to Edge Comp or Juice or other performance modules (sold separately)
Not Yet Reviewed
$84.95
If you're running an aftermarket positive displacement lift pump on your Duramax, a Fleece Performance fuel primer bulb sealing kit will allow you to eliminate the leak-prone primer bulb from your fuel system. The sealing cap includes a 1/8 in. NPT port to feed a low-pressure fuel gauge or cap it off with the included NPT plug. Note: Fleece kits include two screw options (standard 8-32 and metric M4). Thread in by hand each screw type and use the thread pitch with the best fitment. There is variation amongst the model years, so always test first by hand to verify the thread pitch on your vehicle.
( 1 )
$49.99
FASS Fuel Systems replacement fuel pump relocation kits provide you with the option to mount your FASS fuel pump closer to the fuel tank. This reduces the potential for vapor to enter the fuel line assembly and allows for easier priming, as the pump will be doing more pushing than pulling—which will also prolong the life of the pump motor. Keep your ride reliably pumped and primed with a FASS fuel pump relocation kit. Features, parts, and specs may include: * Beneficial for both modified and stock diesel applications * Improved filtration process can help extend life of injection systems * Wiring harness and hose * Installation manual
( 2 )
$61.75
—
$104.50
Rhodes Race Cars fuel pump modules will convert your fuel setup to fuel injection or switch to an internal pump—and they do it with style. These pump modules from RRC are easy to install; simply unbolt your cap, install the module, hook up your power and ground wire, plumb your fuel system, and you're ready to go. There's no need for any modifications to your fuel cell. Rhodes Race Cars fuel pump modules are available in different LPH with attractive black, red, or blue caps—and will include all necessary hardware and full instructions. Choose either single or dual-style module with or without pump.
( 7 )
$299.95
Radium Engineering's duckbill valves are a one-way valve. They prevent aeration and reduce fuel slosh noise and are commonly used on the return hose inside fuel tanks to prohibit fuel backflow for fire safety. When used with venturi jet pumps, these fuel pump components prevent air from entering the vacuum chamber and disrupting the flow path. These duckbill valves are made from quality material and are compatible with all fuel types.
Not Yet Reviewed
$14.20
BD Diesel Stealth covers for the 1998-2002 Dodge 24 V fit onto the VP44 injection pump, providing a secure, sealed connection instead of notching the pump wire for power modifications. A notched wire is not only noticeable, but a break in the wire cover can result in corrosion and a poor connection. BD Diesel Stealth covers make for a clean installation and easy removal of racing performance boxes--plus, they provide a more reliable connection. They are a must for the high performance enthusiast.
( 3 )
$87.95
Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit
Not Yet Reviewed
$749.00
Holley fuel pump module mounting shims are the best way to make sure your module stays secured. Whether you race, off-road or daily drive your vehicle, the module can become loose over time. This can cause leaks, allow gas fumes to get into your ride—or worst-case scenario, your entire pump module disconnects. Order the size needed to help properly secure your fuel pump module application.
( 2 )
$21.00
When you've got a fuel pump project to do, you need the proper components to get the job done right. Walbro fuel pump installation components are an ideal choice, whether you're doing a direct replacement or performance upgrade. From filters to wiring and anything else you need for an easy installation, order the Walbro fuel pump installation components designed to fit your application.
( 2 )
$6.99
Pacific Performance Engineering lift pump fuel line install kits make installation of your PPE fuel lift pump a snap. These kits provide pre-cut hoses, brass fittings, and clamps that you'll need to easily complete installation. Don't get sidetracked searching for correct parts to finish the job; simply order the kit recommended for your vehicle application.
Not Yet Reviewed
$35.99
Aeromotive Apex jet siphons add patent-pending technology to your existing Phantom system. Apex jet siphons provide a constant supply of cool fuel to the Phantom bladder, which allows your system to dominate any extreme application with an uninterrupted flow of gas. They're designed with 4 ft. of gasoline/ethanol-rated suction line and feature a controlled pickup that maintains 1/8 in. clearance to the tank bottom. Pick up fuel from the corner of the tank or saddle bag for an optimal fuel supply at all times with Aeromotive Apex jet siphons.
Not Yet Reviewed
$357.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
