Availability
Showing In Stock Items. Show All 16 Items.
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 8 )
$45.99
Motion Pro designs and manufactures high-quality cables, specialty tools, and controls for motorcycles, ATVs, and UTVs. These heavy-duty clutch holding tools securely hold clutch hubs on most motorcycles and ATVs. They can also be used to remove the locking ring on UTV fuel cells to remove fuel pumps. The tools' reversible blades work on conventional square spline and on round spline style (KTM/Husqvarna) clutch hubs. Additional product details: * Aircraft-grade billet aluminum body with durable blue anodized finish * Precision-machined stainless steel blades are strong and durable * Billet aluminum clamp knob for fast and easy installation and removal * Extended knurled handle provides sure grip when removing or torquing the clutch hub nut * Tool jaws have a range of 75mm (2.9 in.) to 120mm (4.72 in.)
Not Yet Reviewed
$162.99
JR Race Car's Shockwave holding tools provide an easier way to service your clutch for your Jr. Dragster. Simply place the Shockwave holding tool in your vise or the receiver hitch adapter to hold the clutch for maintenance. These handy tools when combined with JR's Shockwave O/D spring compressor tool and spider tool (both sold separately) make it a simpler task to completely service your Shockwave clutch while at the track.
Not Yet Reviewed
$20.59
The Powerbuilt Universal Timing Gear Holder Tool makes replacing and servicing timing gears and timing belts easier. Designed to securely hold timing gears in place when removing or installing the gear retaining nuts, the tool is manufactured using ultra-strong nylon-reinforced composite material with a working rating of 110 lbs.-ft. max torque load. It's also strong and low-profile to reach deeper into those tight engine bays. You can quickly adjust the gear holders to fit timing gears from 4 to 6 in. diameter and anywhere in between. All Powerbuilt installer kits meet or exceed ANSI and/or ASME standards. Additional notes: * Overall length: 15 1/2 in. * Length to center of gear: 12 1/2 in. * Width of gear nut cutout: 1 1/4 in. * Strong and dependable enough to last a lifetime
Not Yet Reviewed
$33.99
BikeMaster clutch holders are slot-style clutch holders. They're designed to hold your clutch in place while being worked on, instead of using something like a screwdriver that leads to damaging your bearings or shipping gear teeth. BikeMaster clutch holders are made of durable steel construction for superior performance and have a rubber handle for superior comfort and grip.
Not Yet Reviewed
$24.69
Motion Pro rotor and sprocket holders will keep flywheels, rotors, and sprockets from rotating during removal and installation. These tools will hold sprockets and rotors with holes center-to-center at a minimum distance of 13mm and a maximum distance of 230mm. They are manufactured from strong steel and feature 5mm and 9mm pins, as well as adjustable stop-screws to keep the Motion Pro rotor/sprocket holders open at set distance.
( 1 )
$47.29
OTC pulley holder locking pliers are adjustable and designed to hold pulleys, clutch hubs, flywheels, gears, and sprockets with internal or external teeth up to 4 in. in diameter. They can also be used on applications with slots or holes with 5/16 in. pins. The locking pliers are available with the tool only, or in a kit with 10 accessory fittings.
Not Yet Reviewed
$32.99
Pit Posse oil filter and clutch hub spanners are made of high-quality, heat-treated black oxide steel and are designed to be used with a 3/8 in. drive ratchet. They will fit oil filters and clutch hubs on many Honda® models and also remove a special engine mount nut on Honda® CBR600RRs. If you're in need of quality tools that remove oil filters and clutch hubs, look no further than Pit Posse.
Not Yet Reviewed
$11.99
OTC flywheel holders are specialty tools that mount in place of the starter and engage the flywheel ring gear teeth. They hold the flywheel/engine stationary during removal of the hub bolt which must be removed to service the pulley assembly.
( 1 )
$82.99
What would make your life easier when you've got a clutch to replace? There's no easier way to change a clutch than to do it with your EBC clutch tools. They feature high-quality steel with a zinc finish and make unlocking clutch retainer bolts a breeze. Don't make your life harder than it has to be. Get EBC clutch tools. You'll be happy you did.
Not Yet Reviewed
$28.70
Do you have clutch work to do on your steel powerhorse? Put that screwdriver down! Using a screwdriver can damage bearings and chip away gear teeth, so before you begin working on the clutch, be sure to put Pit Posse clutch holding tools in your hands. These clutch holding tools are made from medium carbon steel with hardened jaws that open up to 5 in. wide to hold the inner clutch hub. The tools' spanner pins on the back can also be used to safely hold flywheels, gears, sprockets, etc. Don't allow inadequate tools to ambush your ride--use Pit Posse clutch holding tools to protect your investment.
Not Yet Reviewed
$24.99
Motion Pro clutch holding tools will take a firm grasp of your clutch hubs, flywheels, gears, sprockets, and more. They are crafted from medium carbon steel with hardened jaws that open up to 5 in. wide. Removal and installation of your clutch hub and basket can be made easier when you use the right tools--Motion Pro clutch holding tools.
Not Yet Reviewed
$38.49
Some specialty tools are worth making room in your toolbox for, and Motion Pro spanners are some of "those" tools. Manufactured from premium quality high-carbon steel and heat-treated for strength and durability, these spanners will assist you in making clutch hub removal a simpler task. They are finished with a hot black oxide finish for added durability. Motion Pro counter balancer and clutch hub spanners are the right tools to make your job easier--give them a home in your tool arsenal.
Not Yet Reviewed
$11.99
Motion Pro clutch adjuster nut tools are for use on all 1998 and later Big Twin models, excluding applications with hydraulic clutches. These heavy-duty deep sockets allow the tools to recess into the clutch basket and can be driven with 11/16 in. combination wrench or an adjustable wrench. With a compact design to fit easily in your saddle bag or tool wrap, these tools have a through-hole allows that allows for easy access with a hex wrench to hold clutch adjuster screw, while simultaneously tightening the adjuster locknut. To maintain and repair your motorcycle, choose quality tools by Motion Pro.
Not Yet Reviewed
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
