Availability
Showing In Stock Items. Show All 23 Items.
On Sale
Holley needle and seat assemblies can be used as replacements or performance upgrades. Available in different sizes, they're also available in different materials to suit a wide range of applications. Viton® needles are for all gasoline applications, steel needles are used with alcohol or exotic race fuels, and titanium needles are used for their responsiveness during changes in flow rates, as well as for their excellent sealing capabilities. Any way you look at it, you're sure to find the right one for your application.
( 68 )
$93.25
$14.65
—
$205.95
Summit Racing™ needle and seat assemblies allow you to replace or upgrade you old needle and seat to restore lost performance and keep your vehicle running efficiently. High quality Viton needles stand up to all gasoline applications and will keep your carburetor performing at its peak.
( 15 )
$9.99
—
$19.99
AED offers these needle and seat assemblies for alcohol applications. These stainless steel needle and seats provide the ultimate in fuel capacity and seating ability when optimum fuel flow is required. All assemblies come complete with AED's special reusable needle and seat gaskets.
( 5 )
$11.99
—
$16.99
AED traditional needle and seats are designed for applications that are up to 650 hp on gas. These assemblies come complete with special reusable needle and seat gaskets.
( 11 )
$14.99
Quick Fuel needle and seat assemblies achieve the highest flow rates possible. The inlet doors exactly match the adjustment nut flats to align with the fuel bowl's inlet passage. Perfect alignment of the inlet door and this passage ensures optimum fuel flow. The large stem base on the needle provides for a more accurate response to movement of the float arm.
( 25 )
$19.04
—
$159.95
Moroso Holley needles and seats are the parts you need for your Holley carburetor! Two versions are available—the Viton® needle design is highly recommended for gasoline fueled engines because it is resistant to dirt and conforms to the seat for superior sealing. If you use exotic fuels or additives such as alcohol, benzine, acetone, etc., you must use the steel-needle version. Select the needles and seats recommended for your application.
( 2 )
$33.99
—
$34.41
Is your carburetor running too rich or too lean? Then these Edelbrock carburetor needle and seats are just what you need to fine tune or calibrate your carburetor. Several styles are available to suit your application needs.
( 29 )
$24.95
—
$32.95
Quick Fuel Brawler needle and seat assemblies achieve the highest flow rates possible. The inlet window matches the adjustment nut flats to align with the fuel bowl's inlet passage. This allows optimum fuel flow. The large stem base on the needle provides for a more accurate response to movement of the float arm. Available in .110 in., .120 in. and .130 in. sizes.
( 1 )
$28.00
AED Hi-Flow carburetor needle and seat assemblies are must-haves for any HP application. They help you maintain that constant fuel level that is so important for consistency and low ETs—making them ideal for drag racing, superchargers, and blow-through applications. Get that AED performance edge with the AED Hi-Flow needle and seat assemblies best suited for your application.
( 1 )
$14.99
Edelbrock needle and seats for Holley carburetors are service parts for your high performance non-Edelbrock carburetors fit those with center hung bowls. You can choose from either an adjustable or non-adjustable needle and seat assembly, along with two gaskets and a Viton® O-ring. Now, you can have precision service parts for your Holley carburetor, compliments of Edelbrock.
( 2 )
$19.95
—
$22.95
Mikuni needle valve and seat assemblies are the perfect choice when you are re-tuning or repairing your carburetor. These high-quality parts include a premium needle and are designed for an OEM fit.
( 15 )
$18.99
—
$25.99
These precision needle and seat assemblies by Demon Carburetion are specifically designed for Demon, Claw, and Holley performance carburetors. They keep the fuel bowl full, while offering positive sealing with a Viton® tip. The spring-loaded assemblies are recommended for severe off-road and marine conditions, while the .130 in. assemblies are used for increased volume requirements over the .110 in. assemblies.
( 4 )
$42.08
Engine Works offers needle and seat replacements for a variety of Holley carburetors. They are the first stop for the flow of fuel coming into a carburetor—essentially, a basic valve. The seat is typically conical and the needle has a point which seals against the seat to stop fuel from entering the carb at a certain level. This prevents flooding the engine and engine compartment. Needles are available in brass or stainless steel; and seat size options vary from 0.110 in. to 0.150 in.
Not Yet Reviewed
$14.36
—
$31.21
JET offers several needle and seat assemblies for use as replacement or performance upgrades. Available in different sizes, they're also available in different materials to suit a wide range of applications. Viton needles are for all gasoline applications; steel needles are used with alcohol or exotic race fuels; and titanium needles are used because of their responsiveness during changes in flow rates, as well as for their excellent sealing capabilities. Any way you look at it, one of these JET needle and seat assemblies will work for your application.
( 2 )
$11.96
On Sale
Holley steel carburetor needle and seat assemblies are adjustable. You can adjust your float without removing your fuel bowl. They're ideal for high power applications like gas and alcohol-fueled racing engines.
( 1 )
$84.05
$46.23
These Proform needle and seats are precision-machined for exacting fuel flow. They feature a larger stem base on the needle for accurate response to float arm movement. They are designed for gasoline applications with a Viton® tip.
( 3 )
$29.99
—
$31.99
Seat your needle properly with S&S Cycle carburetor fuel inlet seats. Rebuild your Super E and G gas carburetor to perform and flow properly with S&S Cycle carburetor fuel inlet seats.
Not Yet Reviewed
$36.86
Nothing ruins a day on the water like carburetor-related engine trouble. Stay ahead of the problem with Sierra Marine needle and seat assemblies. They allow you to replace your old components—restoring lost performance and keeping your marine vehicle running efficiently. Get back to enjoying the open water by ordering the Sierra Marine needle and seat assemblies designed for your application.
Not Yet Reviewed
$3.99
—
$13.99
Briggs & Stratton carburetor float needles—moved by the float—control the fuel flow to maintain fuel level in the chamber. They help to calibrate your mix, whether you're running too rich or too lean. These replacement needles are available for a variety of specific engine/carburetor applications.
Not Yet Reviewed
$12.99
Nic Woods Racing carburetor needle and seat valves are quality units designed for Mikuni carburetors. Available in different sizes, the needle and seat combos stop fuel from entering the carburetor at a certain level, and prevents flooding the engine. Choose the size you need for your carb.
Not Yet Reviewed
$29.35
Biker's Choice Keihin replacement float valves will help restore performance to your favorite carburetor. They are quality replacements that offer the perfect fit and function for your Keihin carburetor.
Not Yet Reviewed
$62.03
Smell gas? Use quality S&S Cycle carburetor needle assemblies to keep gas in your float bowl at the right height. Rebuild your Super B, E, and G gas carburetors with S&S Cycle carburetor needle assemblies.
( 2 )
$18.95
Briggs & Stratton carburetor needle seats are designed to exact OEM standards, manufactured and tested to help deliver peak performance. There are no substitutes when it comes to keeping your engine powered equipment healthy. To maximize engine life and meet original equipment specs, use Briggs & Stratton for genuine part components and accessories.
Not Yet Reviewed
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
