Availability
Looking to mate a Powerglide to your Ford engine? We’ve got a bellhousing adapter for that. Want to pair a four-wheel drive tranny with your existing small block...
Looking to mate a Powerglide to your Ford engine? We’ve got a bellhousing adapter for that. Want to pair a four-wheel drive tranny with your existing small block Ford? We’ve got the right bellhousing adapter for that, too. Our extensive line of sturdy bellhousing adapters makes it possible to swap in just about any tranny/engine combination you could want. Shop adapters from Advance Adapters, McLeod Racing, TCI, ATI, QuickTime, Trans-Dapt, and many others—all at Summit Racing!
Looking to mate a Powerglide to your Ford engine? We’ve got a bellhousing adapter for that. Want to pair a four-wheel drive tranny with your existing small block Ford? We’ve got the right bellhousing adapter for that, too. Our extensive line of sturdy bellhousing adapters makes it possible to swap in just about any tranny/engine combination you could want. Shop adapters from Advance Adapters, McLeod Racing, TCI, ATI, QuickTime, Trans-Dapt, and many others—all at Summit Racing!
Showing In Stock Items. Show All 37 Items.
Summit Racing™ Cummins to GM bellhousing adapters can facilitate a swap for your GM truck or SUV. Our kits include a billet aluminum adapter plate that's less than 2 in. thick and a steel flywheel. And, unlike OEM adapters, these allow your engine and transmission to be placed straight—not at an angle. They're available for different transmission models. When you want a clean install that's easy and will save you some room, Summit Racing™ Cummins to GM bellhousing adapters are the right choice.
( 16 )
$1,133.99
—
$1,815.94
Trans-Dapt transmission bellhousing adapters are designed to adapt your engine bellhousing flange to a specific style of transmission. They are made of steel and include the correct mounting hardware.
( 43 )
$109.99
—
$140.99
Reid Powerglide bellhousing adapters are made specifically for Reid Racing 2-piece Superglide cases and Super Hydra 400 cases. Cast from high-strength 6061 T6 aluminum and then heat-treated for additional toughness, they pass stringent SFI 30.1 certification standards and are approved with no external shields required. The bell features an open bottom for easy converter access, a reduced diameter for better floorboard clearance, and a contoured mounting flange to properly match the rear of the engine block.
( 3 )
$499.00
ICT Billet bellhousing adapter plate kits assist with connecting a Nissan transmission onto a GM LS engine with minimal modification. Available in two kits, each one is compatible with Nissan 350Z/G35 6-speed transmissions and use all standard F-Body LS T56 flywheel, pressure plate, and bellhousing components. Plates are made from aerospace-grade billet aluminum and will take the place of the front bearing cover on the transmission. ICT Billet bellhousing adapter plate kits allow transmission and clutch servicing without removing the engine in most applications, and each kit includes the bellhousing adapter plate, pilot bushing, clutch disk, alignment tool, and mounting hardware. Choose the kit designed for your generation transmission. Notes: * Standard T56 bellhousing will bolt to adapter plate * Modification to transmission entails cutting/removing OEM bellhousing and OEM front bearing cover from transmission to allow adapter plate installation * To verify transmission generation, measure input shaft bearing OUTSIDE DIAMETER: -- Generation 1 = 3.937 or 100mm -- Generation 2 = 3.543 or 90mm * Installer must verify bellhousing/adapter plate alignment is within .005 in. during installation to prevent bearing side-loading; offset dowels may be necessary to ensure proper alignment.
Not Yet Reviewed
$249.99
—
$899.99
Summit Racing's Pro LS transmission adapters enable you to swap to more common and inexpensive manual transmissions from other vehicles. In addition to the bellhousing adapter, they often include handy items like the billet steel flywheel, fasteners, pilot adapter, and starter mounts. These adapters allow the use of the high performance clutches commonly used with the transmission. The kits are available for 5-speed or 6-speed applications.
( 1 )
$279.99
—
$1,227.99
California Pony Cars aluminum bellhousing adapter plates install between the transmission and the bellhousing, and come complete with the plate bolts for a quick and easy installation. When it comes to restoring your prized Pony car, use only high-quality Mustang parts and accessories by California Pony Cars!
( 3 )
$198.99
Advance Adapters Ford to Chevy transmission bellhousing adapters are designed to adapt your Ford small block 5.0 to a GM TH350, TH400, or 700R4 automatic transmission. These adapter plates are made using lightweight, durable 356 T-6 aluminum. Includes: * Adapter plate * Plastic dust cover * Torque converter adapter ring * 164-tooth flexplate * GM dowel pins * Fastening hardware * Installation instructions
Not Yet Reviewed
$469.76
Lakewood bellhousing adapters feature a laser-cut steel flange that has been zinc plated for corrosion resistance. If you are attempting to install a conventional Chevrolet transmission on your 2013+ LT-1 or LT-4 Crate engine or swapping an LS into your First Gen Camaro, but want to retain your Muncie transmission, Lakewood bellhousing adapters will have your drivetrain bolted together in no time! The kits include longer dowel pins, Grade 8 hardware, and a converter pilot bushing for an easy installation. Additional bellhousing adapter features and specs: * Allows you to swap virtually any factory GM V8 Transmission to any GM V8 engine *Adapts GM LS and LT engine bellhousing bolt patterns to conventional SBC/BBC bellhousing bolt pattern * Fits most GM V8 engine blocks * Fits 4L60/80, TH400, TH350, 700R4, 200R4 and Power-glide automatic transmissions * Fits GM Muncie, Saginaw, T-10, and T-5 manual transmissions * Fits most GM aftermarket transmission cases, such as Tremec T-56 and TKO 500/600 transmissions
( 1 )
$349.95
These Advance Adapters conversion bellhousings are perfect for use when installing a GM powerplant in your Toyota. These conversion bellhousings make assembling your custom drivetrain a no-hassle affair.
( 9 )
$468.36
On Sale
These McLeod manual transmission adapters are designed to mount your factory bellhousing to an aftermarket transmission. They are made of billet aluminum for strength, and their pre-drilled bolt holes make installation simple.
( 7 )
$296.40
$266.76
B&M bellhousing adapter plates were developed to bolt specific Buick, Oldsmobile, or Pontiac transmissions onto Chevrolet small block/big block engines manufactured after 1962. Each heavy 10-gauge steel adapter plate is laser-cut to exacting tolerances for a precise fit, and then powdercoated with a premium black finish. An iconic B&M logo is also laser-cut into the plates. Installation instructions are included, as well as hardware to mount the plate to the transmission.
( 1 )
$131.95
Summit Racing™ transmission bellhousing adapters allow you to mate your engine bellhousing flange to a specific style of transmission. Our adapters feature strong steel construction, a durable powdercoat finish, and include the correct mounting hardware. Select the Summit™ transmission bellhousing adapter designed for your application.
Not Yet Reviewed
$85.99
—
$105.99
TCI high-quality bellhousing adapters allow you to connect your Chevy engine to any B.O.P. (Buick, Oldsmobile, Pontiac) transmission, or a B.O.P. engine to any Chevy transmission.
( 10 )
$93.95
—
$123.95
These Hughes Performance transmission adapter plates are made of aluminum and include mounting hardware. Hughes products are all tested by the Hughes motorsports race team to assure you of their quality and dependability. If you're in the market for a new transmission adapter plate, look no further than a company who has been in the business for over 40 years--Hughes Performance.
( 1 )
$152.99
Advance Adapters AMC to Chevrolet bellhousing adapters allow for the use of a TH350, 700R, 4L60E, or TH400 transmission in your Jeep 4.2, 304, 360, and 401 AMC V8s. You'll receive: * Precision-cut and machined 5/8 in. steel adapter plate * Crank bushing * Torque converter spacer * Dowel parts * Fastening hardware * Adapter instructions
( 1 )
$312.26
ATI Performance bellhousing adapter plates are manufactured from aluminum for strength. They feature predrilled bolt holes to make installation simpler.
( 1 )
$269.00
—
$309.00
Sikky Manufacturing LSX to CD00X transmission adapters allow you to use any of the CD00X (CD001-CD009 6-speed) transmissions behind any GM LS engine. (This readily available 6-speed transmission can be found in the Nissan 350Z and 370Z, as well as the Infiniti G35 and G37.) Sikky adapter kits do not require cutting off the bellhousing, making for a simple bolt-on installation with no flywheel spacers needed. These adapters are 100 percent machined, making for the most precise adapter plate available. Proper alignment of the input shaft and dowel pins ensures maximum reliability. They feature the only SFI-rated and balanced flywheel on the market for this conversion. It's designed to use a 350Z clutch and pressure plate, so any off-the-shelf aftermarket or OEM clutch disc and pressure plate will work with Sikky's included flywheel. Each kit comes with everything needed, including adapter plate, flywheel, pilot bearing adapter, high-torque starter adapter, and all the high-grade hardware needed to bolt it up. Product features: * 100 percent universal * Balanced and SFI-rated flywheel * Fully machined adapter plate * High-torque 18:1 capable starter * Pilot bearing adapter, allowing use of OEM or aftermarket Nissan pilot bearing * No need to cut off the transmission bellhousing * Works with any existing Sikky motor mount kit * Lightweight 15 lb. aluminum flywheel Fitment notes: * DE and HR compatible * Uses any stock or aftermarket clutch designed for the 350Z * Relocation shifter may be required, depending on the application * Will require the use of ARP flywheel bolts (part number 244-2902) * On DE models: due to casting inconsistencies, some bellhousings will require sanding a 1 in. x1 in. area for flywheel clearance (very simple modification) * On HR models: for proper starter gear clearance, a small piece of the bellhousing will need to be removed (very simple modification)
Not Yet Reviewed
$379.99
Scott Drake conversion plates will allow you to install a late model T5 transmission on to your early model vehicle using your factory style 6-bolt bellhousing. The adapter plate installs between the transmission and the early model bellhousing and comes with everything necessary to install it.
Not Yet Reviewed
$749.95
TCI GM Transmission to Chrysler/Ford Engine Adapter Kits are constructed from 1/4" or 1/2" 6061-T6 aluminum and measure 18 in. tall x 24 in. wide. They may be trimmed for chassis clearance or used as a mid-mount plate. These kits are designed to retain the stock starter location.
( 1 )
$734.95
—
$771.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
