Availability
Cold air intake kits are a popular choice among enthusiasts who are looking to optimize engine power and performance. The process of combustion...
Cold air intake kits are a popular choice among enthusiasts who are looking to optimize engine power and performance. The process of combustion requires fuel to burn, a heat source to ignite it, and air to supply oxygen. That air is drawn into the engine through a vehicle’s air intake system, but stock systems are designed in a way that sacrifices optimal air flow (and maximum horsepower) in favor of quieter performance. A performance air intake is a popular and affordable upgrade that allows you to get more power from your engine by creating a larger, straighter airflow path than stock...
Cold air intake kits are a popular choice among enthusiasts who are looking to optimize engine power and performance. The process of combustion requires fuel to burn, a heat source to ignite it, and air to supply oxygen. That air is drawn into the engine through a vehicle’s air intake system, but stock systems are designed in a way that sacrifices optimal air flow (and maximum horsepower) in favor of quieter performance. A performance air intake is a popular and affordable upgrade that allows you to get more power from your engine by creating a larger, straighter airflow path than stock systems.
One of the more popular styles available is a cold air intake system.
Beyond the performance considerations, each type has a different sound quality. Both are noisier than a stock intake, but short ram intakes usually produce a lower-pitched, throatier sound. It’s up to you to choose which you prefer.
Showing In Stock Items. Show All 251 Items.
Roto-Fab Big Gulp Series air intake systems were designed to feed the air demands of the fastest cars in the world. Don't leave horsepower on the table—get the most out of your modifications. Order the kit recommended for your specific vehicle. Roto-Fab Big Gulp Series air intake system features and notes: * Innovative air box coupling: allows for solid mounting to the air box as the system transitions from the air filter clamping surface; seals out unwanted engine heat * Air box seals effectively to the hood, allowing for maximum air filter size and air box volume * Utilizes the full factory air inlet to ensure low IATs and maximize performance * 100 percent silicone hose couplers to ensure lasting product quality * Custom fabricated inlet elbow to maximize performance and airflow cross-section * Oversized breather port to further accommodate high-horsepower applications * Polymer duct work is also effective in reducing heat transfer * Requires a custom tune for your vehicle
( 4 )
$614.95
—
$719.95
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 437 )
$188.82
—
$699.00
If you are looking for the convenience of an oil-free air filter, Roto-Fab dry cold air intake systems put a new spin on great performance and sound. Roto-Fab developed these intake systems to utilize all the available space to package a huge air box and massive filter while maintaining an extremely effective barrier against engine bay heat. Their intake packages perform well as a "stand alone" modification while being capable of meeting the higher air demands of supercharged and high-horsepower builds. Roto-Fab's open top design effectively seals to the hood which maximizes air box volume while providing all of the advantages of a lid. Features include: * Top-quality components throughout including: high-gloss silicone hose couplers, stainless steel hose clamps and fasteners, and molded-in inserts for air box and MAF sensor mounting * High-quality filters designed to last the life of the vehicle * Depending on application, systems are available with or without sound tube delete * Detailed, step-by-step instructions are included for easy installation * Where applicable, the logo badge on the air box has a black anodized finish with a laser-etched Roto-fab logo
( 42 )
$449.95
—
$564.95
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$675.99
—
$758.99
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$350.00
—
$959.00
JLT cold air intakes are engineered to minimize air restriction and increase airflow far better than your stock system. The intake tube is roto-molded plastic with a huge filer opening for superior airflow and no heat soak like metal tubes. The air filter is custom-built for super smooth and fast airflow and has huge deep pleats for more surface area than filters that look much bigger. The ABS plastic heatshield blocks engine heat at idle and low speed. It uses a large area to make sure the filter has tons of cool air and uses the factory fresh air inlet from the bumper to keep temps cool. Improve your vehicles horsepower and performance with one of JLT's cold air intakes!
( 1 )
$319.00
—
$699.00
The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine
( 10 )
$375.56
—
$449.99
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$361.00
—
$729.00
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 834 )
$199.99
$64.99
—
$269.99
Roush cold air intakes feature a premium reusable air filter with a mounting clamp and a custom-formed, glass-filled nylon air box tray. Some models will include a high-flow 3 in. stainless steel induction tube. These intakes utilize your factory PCM calibration and give you a sleek black factory look. You'll gain power and performance with a Roush cold air intake, available for fitment on dozens of vehicle applications.
( 37 )
$362.99
—
$439.99
BluePrint Engines muscle car swap air intake kits are designed to provide proper frequency and location of the mass airflow sensor used with GM controllers. They have been tested on throttle bodies from 80mm to 102mm, and each kit includes filter, tube, MAF receptacle, block-off, clamps, couplers, and hardware. Features and specs: * Red, oil-less cotton gauze washable filter * Total height from base is 7 in. * 4.750 in. black silicon cap * 6 in. inlet * Aluminum intake tube with 97.5mm I.D. * Five stainless steel hose clamps * Tube-to-filter adapter * Three silicon couplers * Silicon clean air hose * Vacuum cap * MAF block-off plate, gasket, and hardware Note: May require modifications based on the wide applications that BluePrint's engines are installed into. Custom installation and modifications, such as drilling a hole for intake air temp on some models.
Not Yet Reviewed
$129.99
Roto-Fab cold air intake systems supply your ride with maximized power gains and an impressive appearance. Their selection of American-crafted systems includes several options that will also provide awesome sound, as well as CAI setups for supercharged (S/C) applications where air demands are higher. Most Roto-Fab intake systems install without modifications and perform well with stock calibrations. Their S/C systems offer great tuning capabilities to gain the most from your setup. All feature large duct sizes, generous air box volumes, and oversized filters. The air boxes come standard with a high-gloss black powdercoat finish. Whether naturally aspirated or supercharged, Roto-Fab cold air intake systems are designed to fit better and deliver a performance difference you will see and feel.
( 93 )
$429.95
—
$689.95
Get cooler air to your engine with one of these Airaid U-Build-It Master Kit I cold air intake kits. They include multiple sections of polyethylene tubes and bends to route your air intake pipe where you want. The systems also include a reusable, conical cotton gauze Airaid air filter and all necessary mounting hardware to complete the installation. Make your engine breathe easier with one of these Airaid U-Build-It Master Kit I cold air intake kits.
( 10 )
$264.99
—
$314.99
On Sale
Maximize your engine's performance with Airaid SynthaMax CAD cold air intake kits. The cold air dam design seals directly to the hood and isolates engine heat away from your intake, allowing cooler air to run through the system. These cold air intake kits feature dual-layered SynthaMax filters, constructed using the finest 100 percent synthetic materials for unrivaled filtering efficiency. Servicing the filters is easy with oil-free maintenance—simply wash them in a mild household detergent and rinse. Airaid SynthaMax cold air intake kits are built with a hand-poured urethane body that won't crack, curl, or shrink. They use the stock air filter location, but add a boost with a huge air inlet that keeps more cold air flowing through the 360 degree filter. Hundreds of models are available for a wide range of vehicle applications. Maximize your horsepower, torque, and fuel efficiency with Airaid SynthaMax CAD cold air intake kits.
( 27 )
$472.99
$246.99
—
$422.99
VaraRam VR-B2 Corvette cold air intake kits feature a multiple venturi system to accelerate air flow. The intake ram air ducts are designed to produce over 40HP and increase torque throughout the RPM range. These air intake kits increase both throttle response and gas mileage. VaraRam VR-B2 cold air intakes are easy to install and do not require any cutting or drilling. Includes VR Super Street filter.
( 19 )
$370.99
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$549.95
$247.95
—
$599.95
Summit Bucks
Cold Air Inductions intake systems have a simple goal--maximizing your vehicle's performance by keeping your intake air as cool as possible! First, every CAI intake is specifically designed and engineered for the vehicle it is sold for, resulting in maximum performance, an easy install, and a perfect fit. Next, their intakes are made of high-quality aluminum--not heat-absorbing plastic. Their intake tubes have a ceramic coating both inside and out to reduce heat soak, as well as to keep radiant heat from penetrating the intake air. And they've applied 3/8 in. thermal insulation inside the air box to prevent heat transfer from the engine bay. Each cold air intake is TIG-welded by hand and powdercoated, plus the air box lids feature a clear viewing window for easier filter inspection. What should a high performance cold air intake system look like? Just like Cold Air Inductions intake systems! Additional features include: * High performance lifetime air filters provide protection with minimal airflow restriction * Black couplers and elbows made from 4 or 5-ply silicone rubber for durability * Entire system meets OEM standards and requirements * Stainless steel clamps and fasteners * Direct replacements for factory air intakes--no tuning required * Everything needed for installation is included * Many systems are available with your choice of near-chrome or textured black powdercoat * Most systems are direct replacements for the OEM air box--no modifications required and the OEM washer bottle is retained in the stock location
( 180 )
$299.99
—
$399.99
VaraRam VR Air Grabber Ram Air induction systems are designed to draw in air from the high-pressure zone between the upper core support and the underside of the hood. They feature a high mount location with water drains to ensure that mud or even water over 2 ft. deep will not create any issues. They are true forced induction systems that are intercooled and will help you gain up to 30 hp and 30 lb.-ft. of torque without any tuning. They are guaranteed to improve your quarter-mile times, as well as your 0-60 time. So, if you're looking for an extra boost in power and want to create a look that screams pure MOPAR power, these VaraRam VR Air Grabber Ram Air induction systems are just the thing for you!
( 12 )
$426.99
JLT engineers set out to create the biggest and baddest intake on the market—and the result was their JLT Performance Series 1 cold air intake kits. These assemblies are fully computer designed to optimize space and give the best fit and finish. A roto-molded plastic tube resists engine heat and keeps the intake air charge nice and cool; while a smooth, tapered path to the throttle body increases air speed and horsepower. The intakes also feature a heat shield designed to help keep hot air out by firmly hugging and sealing itself to the contours of the hood. For great looks and more power, order the JLT Performance Series 1 cold air intake kit designed for your vehicle application.
( 6 )
$259.00
—
$439.00
Banks Power knows that sometimes it's good to be dense. Cold air is denser air, and more density equals more performance. Enter the Ram-Air intake systems—the proven cold air intakes. Banks designed these systems to flow larger amounts of cold, dense air to your engine for greater power and fuel economy. Ram-Air units are enclosed to keep hot, power-robbing engine air out, while they inhale big gulps of fresh air through large, unrestrictive components to feed your hungry engine's appetite. And, no matter if you own a diesel or gas pickup, gas motorhome, or even a Jeep, these systems will keep your engine happy and efficient. Performance stems from more than just airflow—density is the key performer. Order the Banks Ram-Air intake system tailored to your vehicle application.
( 117 )
$394.00
—
$469.00
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$629.99
$212.99
—
$579.99
These VaraRam VR-SC1 C-6 Snake Charmer Ram Air systems feature special internal aerodynamics and filter placement to maximize peak cfm. They include a pleated filter that is washable and reusable. It has deeper pleats--more than any other filter--and peaks and valleys that have been opened up to further increase flow capacity per square inch. The systems use a roto-molded upper section to ensure a seamless internal aero package leading into the mass airflow sensor. The lower scoop section is vacuum-formed to allow for different vehicle applications.
( 10 )
$361.99
Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 61 )
$349.00
—
$699.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
