Availability
Showing In Stock Items. Show All 42 Items.
Stillen offers a wide range of performance parts, including the Trupower air intake scoops for a variety of vehicle makes and models. The factory air intake system on various Chevrolet Silverado/GMC Sierra vehicles is a very unique and creative design. There is no natural path for the air to flow through. The air must travel up the face of the radiator in order to make its way into the air intake opening. Keep in mind the radiators operational temperature is 180-220 degrees—significantly higher than ambient. To solve the issues with this otherwise, fantastic design the team at Stillen created a proper scoop—the Trupower, which lowers the base of the radiator shroud to be in line with the top bar of the vehicle's grille. This design allows for air to come directly into the intake system without being warmed by the radiator or disrupted by lattice type material in the radiator shroud, which eliminates the pre-heating and turbulence caused by the factory system. Order the model designed for your vehicle. Features and benefits: * Direct cold airflow * Reduced (intake) air temperatures * Textured finish for OEM fit and finish * Compatible with air intake or supercharger that uses factory air intake scoop * Easy installation
( 2 )
$211.37
Off-roaders know that dust is a leading culprit for clogging air cleaners, robbing horsepower, and, when left unchecked, major engine damage. S&B Filters particle separators remove 94 percent of dust before reaching the stock filter. Air is spun as it enters one of 19 vortexes, throwing dust to the outer side of the air tubes. A scavenge fan, rated for 50,000 hours in rough conditions, ejects the dust through the exhaust and pulls clean air to the filter. The S&B particle separator and stock filter reach capacity after 2,536 grams of dust, versus a mere 74 grams with the stock system and filter. The included billet clamps allow these separators to be mounted to most UTV roofs or cages. Play in the sand all day when you're equipped with an S&B Filters particle separator. Order the model designed to fit your machine.
( 3 )
$399.00
—
$669.99
S&B Filters map sensor spacers significantly decreases the amount of soot buildup. Your stock diesel setup leads to a ton of soot being built up on the MAP sensor over time--requiring constant cleaning. Install S&B Filters map sensor spacers, so you have one less thing to worry about.
( 3 )
$69.00
aFe offers a variety of air intake replacement components—from air intake tube couplers to covers, trim seal and more. Whether a component gets lost or damaged, you can count on aFe for the quality components you need.
( 4 )
$34.65
—
$152.00
ICT Billet LS mass airflow sensor plugs are built from the highest quality 6061 T-6 billet aluminum. The plugs are designed for use with engine RPO codes LS3, LS7, LS9, LSA, LV1, LV3, LT1, LT4, L83 and L86. They include the necessary bolts and O-rings for proper installation and seal.
( 1 )
$29.99
JLT Performance offers hood vent rain shields for a variety of applications, such as numerous Jeep and Dodge vehicles. The shields are designed to be used with JLT cold air intakes to keep rain water from getting to the filter. Cut from strong and clear Lexan material, the shields hold up to the underhood temperatures without cracking. Order the model recommended for your ride.
( 1 )
$39.00
Mount your K&N Apollo universal air intake with the right mounting brackets and hardware. These saddle bracket kits provide easy, secure mounting to your vehicle as they wrap around the intake pipe and are secured with a hose clamp. Dock your Apollo properly with mounting brackets from K&N.
( 2 )
$36.99
On Sale
APR offers air intake components for an easy and affordable way to replace your worn-out or missing parts. Each piece is designed with the original factory shape to ensure an authentic look to meet your needs. Order the APR air intake components best suited to provide the optimal fit, form, and function for your ride!
Not Yet Reviewed
$79.95
$5.47
—
$43.97
aFe F-150 vent tubes prevent the dreaded check engine light that is prone to come on after installing an air intake on your Ecoboost F-150. Aftermarket intakes flow better than the factory intake and this can cause and issue with the vacuum signal causing a P04DB check engine light to appear. These nylon vent tubes are designed to pull the ideal amount of vacuum after the installation of your air intake kit, keeping the CEL at bay.
( 3 )
$25.20
BBK cold air intake replacement hardware and hose kits will freshen up the look of your BBK Performance cold air kit. Each replacement set includes all the silicon couplers and clamps included in the original kit. This is a great way to replace your old, dirty, and dried or cracked hoses on your BBK cold air intake kit.
( 4 )
$44.99
—
$69.99
Here's the problem: On the L5P Duramax, because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing maintenance problem. This requires the sensor to be routinely cleaned or replaced. The solution is Fleece Performance MAP sensor spacer kits. Fleece's spacer moves the sensor from the direct intake air stream to reduce soot buildup over time and eliminates the need to routinely clean or replace the sensor. The spacer block also integrates a 1/8 in. NPT port to allow for installation of an auxiliary boost pressure sensor. Fleece Performance kits include mounting block, fastener, seal ring, and O-ring port plug.
Not Yet Reviewed
$68.99
Use Spectre vacuum/sensor adapter kits with their modular intake systems where vacuum hoses are required. These adapter kits allow you to mount vacuum tubes or air sensors to any location in your modular air intake. Customize your intake with Spectre Performance vacuum/sensor adapter kits.
( 2 )
$13.99
—
$16.99
When your K&N air intakes need replacement parts, K&N keeps the flow moving by offering many replacement components. Parts like silicone hose couplers, filter adapters, and edge trim will keep your air intake flowing smoothly and looking good. Choose K&N for all of your airflow needs.
( 5 )
$25.99
Mopar Performance Hellcat cold air intake headlamp duct tubes are designed to allow cooler outside air through the headlamp port and funnel it directly into the intake manifold. These kits provide noticeable horsepower and torque gains under varying atmospheric conditions.
( 1 )
$57.99
Dominator cold air boxes help engines bring in cool air from outside the car while also sealing off hot air from under the hood. They feature a universal design utilizing a 14 or 15 in. air cleaner base (not included). Features include: * 18.0 in. diameter x 4.0 in. tall * Made of durable plastic material * Includes one-piece silicone gasket for air cleaner base * Trim top for rake and height of element to hood profile * Fits Late Models, Modifieds, and Street Stocks
( 4 )
$74.99
JLT Performance fresh air seals install into your airbox and are for use with the JLT Series II intakes.
Not Yet Reviewed
$12.95
Steeda silicone hose upgrade kits are designed to replace your blue hose factory hoses. Steeda manufactures these hoses from quality materials to ensure performance and durability.
Not Yet Reviewed
$44.95
S&B Filters particle separator straps are available in several different clamp diameters to fit various size bars. These straps are the perfect fit for the person who damaged or lost a strap on the trail or even relocated their particle separator to a different location that had a different diameter bar. They are designed to firmly hold your particle separator securely in place, thus, allowing your engine to experience clean airflow throughout the ride.
Not Yet Reviewed
$30.00
Some L5P 6.6L Duramax vehicles have a secondary MAP sensor. The problem: Its direct placement into the intake air stream from the factory causes the soot buildup to become an ongoing maintenance problem, requiring routine cleaning or replacement of the sensor. The solution: Fleece Performance secondary MAP sensor spacers. They move the sensor from the direct intake air stream to reduce soot buildup over time and eliminate the need to routinely clean or replace the sensor. Each kit includes mounting block (spacer), fastener, and O-ring.
Not Yet Reviewed
$68.99
APR diverter valve adapters allow you to run the APR throttle body system for 2019 and newer models with diverter valves. The APR diverter valve adapter is CNC-machined billet aluminum with an O-ring seal and hose barb fitting, designed to reroute the hose to the new inlet system. APR adapters include a manifold plug with washer.
Not Yet Reviewed
$34.95
Steeda cold air intake restrictors allow you to add horsepower and torque to your Mustang, while maintaining your factory tune. They'll give you increased power for your daily driving needs with regular gas. And, since they can be easily removed or installed, you can use them at the track to run performance tunes, with no computer flash required. Your car will still produce up to 10 hp and 10 ft.-lbs. of torque to the rear tires with 87 octane fuel. Check applications for compatibility.
Not Yet Reviewed
$94.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
