Availability
Showing In Stock Items. Show All 67 Items.
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$69.99
—
$109.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$81.99
—
$106.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 35 )
$66.99
—
$108.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$53.95
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$67.99
—
$85.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 315 )
$82.99
—
$96.99
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 47 )
$66.99
—
$106.99
Dorman timing covers are a direct replacement that matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards. Features: * Direct replacement - this engine timing cover matches the fit and function of the original equipment cover. * Durable construction - this part is specifically designed to withstand extreme underhood temperatures for a long service life. * Cost-effective solution - offers original equipment quality at a competitive price. * Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life.
( 115 )
$89.95
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 13 )
$86.99
Save time and money! Dorman offers a large selection of valve covers constructed from high-quality plastic, steel, or aluminum that resist warping, cracking, and porousness. The metals are corrosion-resistant, and all covers come with the appropriate number of gaskets to provide tight, lasting seals against oil leaks. They are all direct replacements to ensure a proper fit every time. Order the valve covers designed for your specific make/model or engine.
( 48 )
$98.99
Over time, your stock balancer can wear out, causing vibration and possible major engine damage. Replace your old damper with one of these Dorman harmonic balancers. Part of their OE Solutions line, these balancers bolt right up to the stock location for a perfect fit.
( 173 )
$62.95
—
$90.95
GMB OE replacement water pumps are precision-built and balanced to meet or exceed original equipment specifications. They're assembled with heavy-duty steel bearings—and are lubricated and sealed for life. Order the model designed for your vehicle application. All GMB water pumps are factory-tested for quality and include the following features: * High-flow design for long-lasting, efficient cooling * Designed for OE fit and performance * Precision-ground shaft and hub accept OE fan clutches perfectly * OE-quality forged housing is specially formed to ensure maximum coolant flow * Pressed-on impeller increases water flow * Unique no-sealant-required gasket makes installation fast and easy * Unitized seal protects bearings for long life and leak-free performance * Factory-sealed, precision-ground, one-piece bearing assembly
( 512 )
$56.99
—
$93.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$62.99
—
$69.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$52.99
—
$66.99
Fel-Pro intake manifold gaskets are designed to be replacements for stock-type intake gaskets. This means they're ideal for stock rebuilds, as well as mild performance engines. The seals are available in a variety of configurations for fitment on hundreds of engine applications.
( 497 )
$77.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$52.99
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 18 )
$71.67
—
$107.50
ATP Automotive provides one of the widest product offerings of automatic gear-shifting control products, including transmission wiring harnesses, for most import and domestic vehicles. ATP designs and manufactures them to meet or exceed the OEM specifications to properly control your drivetrain. Get exact-fit, no-compromise replacement parts when you order the ATP automatic transmission wiring harnesses designed for your application.
( 1 )
$102.99
Dorman rear crankshaft oil seal installers are convenient and valuable tools for use for when replacing the rear main seal cover on specified vehicle applications. These must-have tools ensure the cover is properly aligned on the crankshaft to prevent damage and leaks. The tools machined from low-carbon steel, zinc-plated and then are clear-chromate-coated for durability.
( 1 )
$86.99
Oil is the lifeblood of your engine, so it deserves a superior reservoir--such as one of these Dorman oil pans. They are constructed of painted stamped steel or natural finish aluminum for long-lasting durability. Each replacement unit is manufactured to OEM specs, ensuring a precise fit that provides an additional layer of efficiency and convenience without any modifications. Leaks, rust, damage, or an engine rebuild are all good reasons to install a new oil pan. Nearly 200 models are available, with various configurations, capacities, and sump styles. Find the Dorman oil pan to fit your car, truck, van, or SUV--and keep the vital lubricants flowing. Oil drain plugs and drain plug gaskets are sold separately.
( 229 )
$83.99
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 370 )
$79.99
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 9 )
$55.29
SCE MLS Spartan head gaskets are strong, simple to use, and ready for battle. These multi-layer stainless steel (MLS) gaskets feature fluid sealant coating applied to all inner and outer gasket plates. This proprietary method provides a continuous, unbroken coating that seals up to 60RA surface finishes on block and heads, and a superior cold seal. Choose the model designed for your vehicle. SCE Spartan head gaskets, with their advanced manufacturing, delivers trouble-free, bolt-on performance without extra sealants.
( 2 )
$87.55
—
$105.93
Dorman transmission pans are the perfect OE replacements for those rust-prone parts. Some things just don't last forever. So, when it's time to replace your transmission pan, look to Dorman for the qualities, fit, and function you need to keep your vehicle on the road. Check and service your parts often and replace them with Dorman.
( 87 )
$81.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
