Availability
Crown Automotive steering knuckle seals install between the steering knuckle and axle housing. Kits may include retaining plates and seals and are application-specific. Check attributes for proper fitment. Crown Automotive is renowned for manufacturing the highest quality OE replacement parts.
( 5 )
$24.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 29 )
$39.99
—
$51.99
Crown Automotive offers a vast array of replacement parts and accessories for Jeep and Willys vehicles from the 1940s and up. These transmission installation/rebuild kits include front and rear bearings, gaskets, seals, and small parts needed to overhaul your manual transmission. (Does not include blocking rings.) Order the kit recommended for your application.
( 5 )
$49.99
If you have play in your steering, then you may need new National steering knuckle bearings. Worn bearings may let your vehicle wander, so keep it on track with quality replacements from National. Their steering knuckle bearings meet or exceed OE quality for a great fit that works like the originals.
Not Yet Reviewed
$20.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$41.99
—
$49.99
Crown Automotive clutch release bearings will restore the "heart" of your clutch operation. Whether you call them throwout bearings or release bearings, they are the components that move back and forth—pushing and releasing the other components to engage or disengage your clutch for smooth shifting. Just as your heart's pumping keeps you going, so it is with the release bearing and your clutch. So, for an OE fit and better clutch performance, choose your replacements from the Crown selection—available for a wide range of makes and models.
( 6 )
$24.99
—
$30.99
Flywheel ring gears can easily be replaced on your manual transmission for a lot less money than the entire flywheel. Crown Automotive has the OE-style flywheel ring gears which will allow your starter to get the engine spinning. If the pinion teeth don't mesh cleanly with the ring gear, it will cause accelerated wear on your flywheel and starter. Heavy-duty steel gears from Crown will get you moving again at peak performance.
( 1 )
$28.99
—
$30.99
BCA Bearings by NTN oil seals are designed and manufactured to meet or exceed OEM standards. Advanced technologies utilizing materials like PTFE and Viton®, coupled with the most modern sealing design principles to ensure optimal leak and contaminant protection.
( 1 )
$34.99
Make sure that the job is done right with National Bearing differential carrier bearings. You can trust National Bearing to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to National Bearing's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 5 )
$24.99
Crown Automotive manual transmission bearings enable your tranny to operate at peak performance. Your transmission has bearings that will keep it running smoothly, and Crown offers a diverse selection of replacements to fit your vehicle—whether it is vintage, classic, or a little more modern. From input, output, and main shaft bearings, needle bearings for gears and much more, Crown Automotive manual transmission bearings will help you shift from harsh performance into efficient and reliable operation once again.
( 1 )
$21.99
—
$48.99
Yoke your U-joints with OMIX-ADA U-joint fasteners. They offer U-bolts, as well as yoke strap and bolt kits to secure your U-joints. Attach your driveshafts for on-road/off-road performance with OMIX-ADA U-joint bolts.
( 2 )
$22.99
Powertrax cross shaft pins are quality components for your Lock Right differential. These hardened steel pins are specifically designed for use with your Powertrax Lock Right locker.
( 3 )
$25.99
These National Bearing wheel bearings are designed for use with your OEM or aftermarket brake rotors. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.
( 24 )
$25.99
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$22.99
—
$55.99
Crown Automotive knows that wheel bearings can eventually wear out. If you notice excessive play or noise—especially when cornering—and adjustment doesn't fix the problem, the wheel bearings and seals in your Jeep may need replaced. Because wheel bearings are a vital part of your vehicle's suspension, if they become worn or damaged, maintenance should be performed as soon as possible. Crown is a name you can trust for quality automotive parts for numerous vehicles.
( 5 )
$42.99
Whether your vehicle is 2WD or 4WD, the outer axle wheel bearings and races will eventually need to be replaced. When that day arrives, consider Crown Automotive wheel bearing races. They are designed and built to OE specs for easy fitment and reliable service on a variety of makes and models. These steel races will fit snuggly in the axles or hubs and provide excellent service. Crown Automotive wheel bearing races help make for an easier ride down the road.
Not Yet Reviewed
$28.99
Crown Automotive axle hub flanges replace the outer end of a 2-piece axle shaft and mount the wheel and brake drum. Flanges can be damaged by curb strikes, over-torque, or even corrosion. Crown flanges are as solid as rock and hold up to everything you can throw at them.
Not Yet Reviewed
$50.99
If you're having trouble getting in gear, Crown Automotive manual transmission shifter forks can help. These shaped pieces of steel engage the slider gears and push them into the positions desired by the driver to create the intended gear. High-quality replacement transmission parts are constructed from durable materials to ensure the strength that every auto enthusiast expects from Crown Automotive.
( 7 )
$22.99
BCA Bearings by NTN multi-purpose bearings are for light- and medium-duty applications. They are precision-engineered from high-quality materials to provide optimal performance and durability. Bearings feature: * 52100 steel for high-hardness capability, excellent resistance against deformation, and wear * Polished raceways for low running noise * Exceed OEM quality standards * Wide range of both standard and non-standard configurations * Common applications: Alternators, transmissions, engines, and transfer cases
( 1 )
$20.99
—
$39.99
BCA Bearing by NTN tapered roller bearings are for light- and medium-duty applications. These bearings go through a case carburization process that creates bearings with a hard, wear-resistant outer shell and a tough ductile core. BCA Bearing by NTN bearings are precision-engineered from quality materials to provide optimal performance and durability. Tapered roller bearings feature: * Carburized surface layer (case carburization) on rings and rollers * Excellent shock resistant properties * 40 percent longer life compared to through hardened product offerings * High-capacity for radial, axial, and combined loads * Common applications: Transmissions, engines, differentials, wheel end, and transfer cases
Not Yet Reviewed
$22.99
—
$23.99
Mopar Replacement pinion bearings are direct-fit OEM replacements that will provide the matching fit and function of your originals. Worn bearings provide poor operation and unwanted noises. For the most dependable and reliable service of your Chrysler, Dodge, or Jeep vehicle choose genuine Mopar pinion bearings to restore proper performance.
Not Yet Reviewed
$28.99
With proper maintenance practices and Crown Automotive quality manual transmission replacement parts, you and your ride will benefit from the best driving experience on and off-road! Crown knows that Jeeps are driven harder than most other vehicles and that is why they emphasize offering only quality parts, from synchro springs, keys, sleeves, hubs, snap rings, and shift forks to hardware and other components. And, all are designed to meet your standards for quality and performance at very reasonable pricing.
Not Yet Reviewed
$25.99
Your transmission is essential to putting the power from your engine to the wheels. So, it needs to be reliable and ready to go. The wide variety of OMIX-ADA manual transmission replacement components allows you to service your transmission, whether you need synchronizer springs or sleeves, main shafts or shifter shafts, retainers, clips, or snap rings. OMIX-ADA has the components you need to keep your rig shifting properly. OMIX-ADA manual transmission replacement components are built to the original specifications and come with a limited 5-year warranty.
( 12 )
$53.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
