Availability
Showing In Stock Items. Show All 86 Items.
Odyssey Performance Series batteries are designed to handle the increased use of on board accessories in today's vehicles. They combine long service life, high reliability, and deep cycle capabilities. Performance batteries provide all the reliability of the Odyssey Extreme Series batteries, without the high cold cranking amps or reserve capacity many people may not require. The Performance Series batteries contain flat plates made of 99.99 percent pure lead--not lead alloy, like many conventional batteries.
( 63 )
$363.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 908 )
$258.99
—
$293.99
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 54 )
$168.63
—
$433.40
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$19.22
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 643 )
$72.49
$65.25
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$130.65
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 58 )
$18.99
Compu-Fire replacement alternators feature quality construction and are a dependable solution to your charging problems. Available in a variety of amperages and styles, they allow you to choose the right one for your ride and the accessories you run. Compu-Fire alternators have the power you need to keep you going.
Not Yet Reviewed
$256.75
—
$413.25
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series OE replacement horns are built for durability and reliability. They offer the correct fit for an easier install and are available in high-tone and low-tone styles. Vehicle horns should be kept in good working order for safety of the highways. Choose the value and quality of Standard's T-Series to service your vehicle.
( 5 )
$33.99
Where does one go for innovative automotive repair solutions? The answer is Standard Motor Products! SMP offers quality OE replacement parts, including electric horns, which are available in either high output high-tone or low-tone applications. All horn styles provide a factory-original fit, for a professional appearance with sturdy construction--and their price won't bust the budget!
( 24 )
$32.99
—
$39.99
Summit Bucks
When it comes to replacing critical electronic equipment for your GM vehicle, don't trust aftermarket suppliers to get it right. Rely on ACDelco GM Genuine Parts line of electronics. Built to match factory parts in fit, form and function, ACDelco GM Genuine Parts horns will let you keep your GM car, truck, or SUV "all General Motors." Order the model recommended for your specific application.
( 3 )
$40.99
FAST PS40 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 4 )
$67.95
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 255 )
$206.68
—
$318.80
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 141 )
$64.60
—
$67.90
SKF alternator replacement bearings will fit directly into your current alternator. They are designed uniquely for each make/model available. Use only the most trusted bearing in the industry, SKF!
Not Yet Reviewed
$12.99
NGK V-Power spark plugs offer economical performance for nearly any automotive application—and they're the only plugs with NGK's V-Groove technology. These plugs enhance ignitability, lower the voltage requirements of ignition systems, and have strong anti-fouling characteristics, while improving fuel mileage and acceleration performance. The V-Power plugs are also highly durable against electrical and chemical wear, making them long-life replacement plugs. Because of the V-Groove, the spark occurs at the edge of the center electrode—so heat is not absorbed by the electrode itself. This allows the flame kernel to expand quickly and efficiently for a complete burn and great performance. More than a hundred models are available, both universal and application-specific; order the plugs designed for fitment on your vehicle.
( 398 )
$3.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 140 )
$9.99
—
$16.99
Compu-Fire ignition module kits are used by VW Baja racers. These ignition modules for Bosch distributors replace the contact breaker points. They deliver peak performance, proven durability, and an easy installation. Increase small car performance in a big way with Compu-Fire ignition module kits.
( 6 )
$120.40
Compu-Fire DIS-IX distributorless ignition systems for your Bosch 009 distributor provide triple the energy of traditional electronic ignition systems. You'll realize the benefits of the maintenance-free, instant starting setup in these bolt-on, plug-and-play systems. The distribution and the switching functions have been eliminated, but you still have need for the timing function, and the body of a Bosch 009 contains a robust centrifugal-advance mechanism that fulfills that role in a practical, inexpensive, and reliable manner. DIS-IX systems include: * Custom high-energy 60,000 V coil pack * Silicone spark plug wires * All electronics, wiring, and connectors * Mounting hardware.
( 4 )
$368.15
PerTronix alternators are designed for Volkswagens to allow the use of high-output sound systems, engine management systems, and off-road lighting, plus they are direct bolt-on replacements for air cooled Volkswagens. They are internally regulated for excellent output at idle and their internal fan helps to maximize cooling for improved component durability when used in extreme operating conditions. The alternators are available in natural or a show-quality polished finish. Order your application in your preference of finish.
( 2 )
$246.65
—
$402.60
Don't take chances with old, questionable, or faulty brake light sending units that can be a danger to you and others. Standard Motor Products replacement brake light senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. They're available for fitment on a wide variety of cars, trucks, and vans. Trust your vehicle's electrical system needs to Standard Motor Performance.
( 37 )
$12.99
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$64.60
—
$67.90
Summit Bucks
ACDelco conventional resistor spark plugs feature a design for reliability and efficient performance. These economical replacements remain ideal for many vehicles and marine applications. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance every time. The spark plugs are available in a variety of sizes and other options for universal and application-specific fitment. Order the model recommended for your vehicle.
( 264 )
$2.99
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 652 )
$62.90
Modal Header