TOYOTA - Free Shipping on Orders Over $109 at Summit Racing

Magnuson Radix TVS1900 Supercharger Kits

Down to the smallest part, the Magnuson line of TVS1900 bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don't lose track of parts in the middle of your installation. All the hardware needed for a full and complete installation is also included so you won't be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step installation manuals will walk you through the install process with exact attention to detail. Magnuson's TVS1900 superchargers utilize EATON's latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson's patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in their TS16949 certified facility – the highest ISO OEM quality certification standard in the market.

3.4 out of 5 stars ( 5 )

$7,195.00

Magnuson Magnum MP90 Supercharger Kits

Thanks to its positive-displacement roots-type design, the Magnuson Magnum MP90 delivers immediate throttle response with zero turbo lag and torque that's ready when you are, from off-idle through the entire rev range. Designed for daily dependability and hard use alike, this system integrates a large liquid-to-air intercooler, front-mounted heat exchanger, and electric water pump to keep intake temps down and performance consistent, even under heavy load or hot weather. Whether you're crawling at Moab or hauling on the jobsite, the MP90 is built to keep pace. Magnuson's engineers developed this system to meet the same quality and durability standards as OEM components. The supercharger, intake manifold, and intercooler are integrated into a single sealed unit, minimizing leak points, reducing install time, and requiring zero maintenance. It's pre-filled, factory sealed, and ready to run out of the box. Installation is straightforward, a pro can handle it in a day, and a skilled enthusiast can complete it over a weekend. The included 50-state-legal calibration is delivered via a plug-and-play handheld programmer, tuned for both daily drivability and maximum power gains.

4.0 out of 5 stars ( 2 )

$6,395.00

Magnuson Magnum TVS1320 Supercharger Kits

Magnuson TVS1320 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. These TVS1320 systems were developed to be direct bolt-on kits with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The TVS1320 also looks and fits like OEM, almost like it belongs there. With no cutting or welding, it's also easily reverted to stock. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharge your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,495.00

Magnuson Magnum TVS2650 Supercharger Kits

Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$8,095.00

—

$8,195.00

Trail-Gear Trail-Link 3-Link Tacoma Solid Axle Swap C Kits

Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.

Not Yet Reviewed

$7,999.99

Edelbrock E-Force FR-S and BRZ Supercharger Kits

Edelbrock E-Force FR-S and BRZ Supercharger kits have finally arrived for your 2.0L equipped FR-S and BRZ. These kits are designed exclusively for the FA20/4U-GSE engine. The unique inverted design features long runners that allow for maximum flow at high rpm, while retaining great daily driving characteristics. The superchargers have been designed from the ground-up and utilize Eaton 1320 TVS rotor assemblies for maximum efficiency in a compact package. As with all Edelbrock E-Force superchargers, these systems feature an efficient high-flow inlet configuration that results in a shorter, less restrictive intake path for improved airflow and performance. A large dual pass air-to-water intercooler and heat exchanger cool the incoming air. All of these features help the E-Force supercharger to deliver dramatically improved performance—especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. Lastly, each supercharger assembly is finished in a durable black powdercoat with red accents for a unique look that will let everyone know your car is E-Force powered! Kits are available with or without tuner. Order the model recommended for your vehicle. Additional product features: * High-flow intake box and filter that allows for twice the airflow * Compact design fits under the stock hood without modification * Supplied with preformed hoses for ease of installation * Bolt-on installation; everything fits right out of the box with no cutting or welding required * Features Eaton Gen VI 1320 TVS rotor assembly—the same high-quality rotors used by many OEM manufacturers * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Includes an EcuTek ProECU Programming Kit with E-Force tune pre-installed * Integrated bypass valve for minimal decrease in fuel economy * 50-state emissions pending with Edelbrock tune * 3-year / 36,000 mile powertrain warranty

4.78 out of 5 stars ( 9 )

$6,187.95

—

$7,350.95

Summit Bucks

Vortech Tuner Centrifugal Supercharger Kits

If you're looking for a supercharger your can customize to your needs, without including parts that you don't want, then Vortech kits are for you. Vortech's tuner centrifugal supercharger kits feature lightweight, investment-cast aluminum impellers that are heat-treated, CNC-machined, and high-speed balanced to ensure smooth operation. The gear cases and volutes are cast from premium A356 aluminum alloy, heat-treated, and then CNC-machined. Kits are available in both satin and polished finishes and come with a step-by-step, fully illustrated installation manual. Tuner kits do not include fuel and engine management hardware to allow for custom tuning. These kits do require custom (dyno) tuning by a specialist. Tuner kits are not smog legal. Most kits also include: * Matched supercharger * Heat-resistant silicone hose couplings * Premium-grade flex hose * Flow-tested cast aluminum and/or urethane air discharge tubing * Compressor bypass valve * OEM-style heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware Some kits will include a high-flow air intake system, and a reusable air filter element.

5.0 out of 5 stars ( 1 )

$6,494.99

Camburg Engineering King 3.0 Lift Kits

Camburg Engineering offers King 3.0 lift or leveling kits for a variety of applications, including many Ford, Chevy, and GMC trucks from 2007 and up. They utilize 1.25 in. uniball or KINETIK billet upper control arms, combined with King 3.0 Series front coilvers with compression adjusters and rear 3.0 bypass shocks. This combination of parts not only improves the ride and handling on-road, but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms, these shocks increase wheel travel. Additional notes: * 0-2.5 in. lift, depending on model * Improved ride and handling, both on and off-road * Eliminates weak upper ball joint * Increased wheel travel * Corrected suspension geometry * Note: Some factory wheels will not clear the upper arm and may require a wheel spacer. Camburg highly recommends aftermarket wheels with a zero offset with all Chevrolet kits for optimum performance and fit.

Not Yet Reviewed

$6,905.65

—

$7,447.85

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.74 out of 5 stars ( 76 )

$5,002.99

—

$8,195.99

Trail-Gear Tacoma Solid Axle Swap C Kits

Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.

Not Yet Reviewed

$7,999.99

ReadyLift Suspension MAX3.3 Lift Kits

ReadyLift Suspension MAX3.3 lift kits deliver superior ground clearance, aggressive styling, and next-level performance for both on-road and off-road adventures. At the heart of these kits are the game-changing Falcon 3.3 Fast Adjust Dampers, offering on-the-fly adjustability with 8-position micro tuning and a 3-position Fast Adjust Knob, allowing you to dial in your ride for maximum comfort or firm, responsive handling. Whether you're cruising to work, towing heavy loads, or conquering rugged terrain, these premium dampers ensure unmatched versatility and control in every scenario. Complementing the Falcons are additional premium components for your lifted truck that allows you to gain the most performance from your vehicle without sacrificing ride quality or maneuverability.

Not Yet Reviewed

$5,249.95

KW Club Sport Coilover Kits

If you spend more time on the track than on the road, then the KW Club Sport coilover kits are for you. Developed for optimum performance in keeping with motorsports applications for race track and road use, these coilovers feature linear race springs with camber adjustable front top mounts. The coilover kits have stainless steel strut housings, high-quality yellow springs, and purple aluminum components. They were designed with independently adjustable compression and rebound dampers to give you the perfect setup for any race track. Order the kit recommended for your vehicle.

Not Yet Reviewed

$6,664.00

—

$6,894.00

Bed Wood and Parts RetroLiner Wood Bed Liner Systems

Bed Wood RetroLiner systems offer enthusiasts who prefer an all-in-one kit a truly innovative product to deliver yesteryear's classic touch to your late model truck. RetroLiner wood bed liner systems provide American craftsmanship that will boost your truck's looks with beautiful wood only available through Bed Wood and Parts. The systems include your choice of nearly 40 exotic and popular wood species--all kiln-dried and stabilized, precut, properly milled, grooved, 4-stage finish sanded, and delivered ready to finish! Plus, you'll receive cut-to-length polished stainless steel or natural steel bed strips and mounting hardware, mounting pads, a frame, an installation tool, and comprehensive, easy-to-follow instructions. There's no drilling or cutting required and they install without damage to your factory steel bed! Whether you're restoring a pre-war classic, personalizing your truck from the musclecar era, or customizing a newer domestic or import model, you can trust your project to Bed Wood and Parts RetroLiners because, as they say, "Wood looks good!"

Not Yet Reviewed

$5,960.00

—

$8,342.50

Trail-Gear Rock Assault Fully Built Axle Assemblies

Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges

Not Yet Reviewed

$7,599.99

Dart 2JZ Iron Eagle Engine Blocks

A strong foundation allows you to create a successful build with winning performance. With innovative design, exceptional strength, and versatility, as well as outstanding performance capabilities, Dart Machinery 2JZ Iron Eagle engine blocks are ready and able to power high performance builds for many years to come. The ideal candidate for hot rodders, drag racers, time attack competitors, drifters, and high performance street enthusiasts, Dart 2JZ Iron Eagle blocks are game-changing, affordable options, capable of achieving significant power boosts. Meticulously designed from the ground up, these 2JZ engine blocks not only overcome the limitations found in the OEM design, but also incorporate superior block material and introduce numerous performance enhancements. With features that make them a cornerstone for any high-performance setup, these iron engine blocks, including the sought-after 2JZ GTE block and aluminum 2JZ block options, are set to become the staple in serious performance circles. Choose one for your build. Iron Eagle features: * Extra-thick decks ensure reliable head gasket seal * Machined for screw-in style freeze plugs * All OE bolt holes for starter, water pump, etc. * Extra-thick outer block case for increased strength under high-horsepower levels * Blind head bolts available in 11mm (standard) or 1/2 in. upgrade * Scalloped water jacket increases flow around cylinder for better cooling

Not Yet Reviewed

$11,230.99

Camburg Engineering King 2.5 Lift Kits

Camburg Engineering offers King 2.5 lift or leveling kits for a variety of applications, including hundreds of Ford, Chevy, and GMC trucks from 2007 and up. They utilize 1.25 in. uniball or KINETIK billet upper control arms, combined with King 2.5 Series front and rear shocks with compression adjusters. This improves the ride and handling on-road, but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms, these shocks increase wheel travel. Order the kit recommended for your vehicle. Additional notes: * 0-3.5 in. lift (front), depending on model * Improved ride both on and off-road * Eliminates weak upper ball-joint * Increased wheel travel * Corrected suspension geometry * Note: Some factory wheels will not clear the upper arm and may require a wheel spacer. Camburg highly recommends aftermarket wheels with a zero offset with all Chevrolet kits for optimum performance and fit.

Not Yet Reviewed

$5,221.60

Camburg Engineering FOX 2.5 Elite DSC Lift Kits

Camburg Engineering offers FOX 2.5 Elite DSC lift or leveling kits for a variety of applications, including many Ford F-150 and Bronco trucks from 2015 and up. These high performance mid-travel suspension systems include adjustable front and rear shocks, and billet or tubular uniball upper control arms. The front coilovers provide improved ride quality and the ability to lift your vehicle up to 3 in. for both on and off-road use. The shocks have a 2.5 in. diameter body for increased oil capacity and are fully rebuildable and revalveable. Remote external reservoirs help lower operating temperatures, and the Dual Speed Compression (DSC) adjuster allows for precise tuning—with 12 low-speed and 10 high-speed compression levels. The integrated coil spring can be adjusted for preload and ride height. Camburg's upper arms are designed to increase wheel travel, improve geometry, and enhance driving characteristics. Kits are available with rear gas-charged adjustable (or non-adjustable) monotube shocks with reservoir.

Not Yet Reviewed

$5,104.90

—

$6,058.90

Dart 2JZ Rotating Assemblies

Dart Machinery's 4340 billet crankshafts for the Toyota 2JZ engine platform are engineered to handle high-boost environments and designed to take the legendary 2JZ platform to 2,000+ hp! For your added convenience, Dart 2JZ rotating assemblies are available, allowing you to pair these excellent billet crankshafts with your choice of Boostline steel or MGP aluminum rods, Diamond pistons, and Trend H13 .225W wrist pins. Piston rings are also included. Choose your preference for your Toyota 2JZ build.

Not Yet Reviewed

$5,705.99

—

$5,850.99

Camburg Engineering FOX 3.0 Factory DSC Lift Kits

Take your off-road game to the next level with Camburg performance suspension lifts. Built tough to handle the roughest terrains, these kits boost your vehicle's durability, comfort, and ground clearance, letting you conquer any challenge thrown your way. Camburg Engineering FOX 3.0 Factory DSC lift kits elevate your suspension with superior control and responsiveness, ensuring smoother rides on and off-road. The FOX Dynamic Suspension Control (DSC) technology allows fine-tuning for varying driving conditions, and with Camburg's Kinetik or tubular upper control arms, you gain enhanced strength and precision. Upgrade your suspension setup to conquer diverse terrains with the maximum performance and driving comfort of Camburg FOX 3.0 Factory DSC lift kits. Select a kit designed for your truck. Kits may include: * FOX Factory Series 3.0 DSC rear shocks * FOX Factory Series 3.0 DSC front coilovers * Kinetik CNC-machined 6061 billet aluminum control arms with Type 2 anodized gunmetal gray finish * Powdercoated chromoly tubular control arms are CNC laser-cut, bent, and MIG welded

Not Yet Reviewed

$9,253.90

ProCharger D-1SC Supercharger Kits

ProCharger D-1SC supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The D-1SC kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.

Not Yet Reviewed

$7,399.00

TOYOTA Parts and Accessories