Availability
Showing In Stock Items. Show All 57 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 41 )
$38.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$6.99
—
$15.99
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$6.99
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$7.99
—
$36.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$8.99
—
$15.99
Wheeler's Off-Road Performance brake line sets are braided stainless steel and PTFE construction, DOT-approved, and available with a red or black protective PVC oversleeve for protection against snags and abrasions. They provide a more positive braking response by eliminating the swelling under pressure, inherent with factory-type rubber lines. These brake line pairs are easy-to-install replacements and available for front or rear in different lengths to work with stock and lifted vehicles. Choose the Wheeler's Off-Road Performance brake line set made for your vehicle.
( 1 )
$89.69
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$45.99
—
$50.99
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 162 )
$14.99
—
$16.99
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 170 )
$13.99
Dee Zee's auxiliary tank transfer line kits will turn your Dee Zee auxiliary tank into a portable refueling station by giving you the ability to refuel your diesel fuel tank via a gravity feed system—and that means less time at the pump and more time on the road. These kits include all hoses and the mounting hardware to complete the conversion. A shut-off valve to start and stop diesel fuel transfer helps to ensure fool-proof operation. Dee Zee auxiliary fuel line connector kit Features: * Feeds diesel directly into your fuel line * Some cutting required on the OEM fuel hose * Flow valve must be closed during vehicle operation * Gravity system not intended for continuous fuel transfer * Only for use with transfer tanks meeting Federal DOT Requirements * Auxiliary tank not included
( 1 )
$95.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$19.99
—
$113.99
Bleeding your brakes is critical in keeping your ride in top performance. Dorman brake bleeder screw assortments allow you to do just that. They are made of high-quality materials and are a sure way to make bleeding your brakes a breeze. Screw assortments contain two of each of the following sizes: * 1/4-28 in. x 15/16 in. * 5/16-24 in. x 1 in. * 3/8-24 in. x 1 1/4 in. * M10-1.0 x 35mm * M10-1.5 x 30mm
( 4 )
$11.99
Walker weld-in oxygen sensor fittings work with most OEM and aftermarket sensors. They are ideal for custom or do-it-yourself fabricators building headers for computer-controlled cars or trucks using an oxygen sensor.
( 1 )
$14.99
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 56 )
$6.99
—
$174.99
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$13.99
Bleed your brake system with these Dorman brake bleeder screws. They're designed to mount into your OEM caliper and will clear all stock components. Available for passenger cars, trucks, and SUVs, the Dorman brake bleeder screws allow for the fast, easy bleeding of your brake system.
( 12 )
$6.99
—
$7.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 437 )
$13.99
—
$40.99
Fine Lines offers a comprehensive selection of brake lines in two different materials, steel, and stainless steel, as well as in many different pre-bent line configurations to fit most make and model vehicles. The stainless steel brake lines are stronger and more durable than rubber, and will provide a firmer, more comforting feeling when you step on the brake. The pre-bent tubing will help you save time on your installation, allowing you to get your vehicle back on the road quicker. Choose the brake lines from Fine Lines designed for your application to restore your vehicle's brake responsiveness.
( 7 )
$55.94
—
$59.34
Fairchild Industries designs, develops and distributes molded radiator hoses for a wide range of vehicles. Manufactured from OE equivalent polymers, these replacement coolant hoses are available in many different lengths, diameters, and hose end options to ensure proper fitment and long-lasting performance. Order the molded radiator hose recommended for your application.
( 1 )
$9.99
—
$16.99
Cardone features rack and pinion hydraulic transfer tubing assemblies to replace rusty and leaking lines. Since these lines aren't typically available from the manufacturer, these quality direct replacements can help get you back on the road at a fraction of the cost of an entire rack and pinion assembly replacement. The new assemblies are pre-bent with fittings, and are designed to meet OEM performance for form, fit, and function. These Cardone rack and pinion hydraulic transfer tubing assemblies include the necessary components needed to complete the job. Order the rack and pinion hydraulic transfer tubing assembly best suited to fit your application.
( 8 )
$12.99
—
$14.99
Continental heater hoses are designed for vehicles that need custom-routed heater hoses. They meet or exceed SAE J20R3, D1 specifications, so they'll stand up to the heat. Continental heater hoses use rugged construction; most are manufactured from Versigard rubber—a compound highly resistant to heat, oil, and weather. Their patented knit reinforcement is typically made with Tylanar fabric, a material that also meets the safety requirements. Some models incorporate other high-grade materials, as well. Continental heater hoses are available in a variety of diameters and lengths compatible with numerous of makes/models.
( 9 )
$7.99
—
$45.99
Four Seasons air conditioning suction hoses are your answer for fixing it once and fixing it right. Suction hoses manufactured by Four Seasons are constructed with double-wall barrier hose, gaskets, O-rings, seals, and feature a crimped fitting connection. These hoses meet or exceed the OE-design fitment, form, and function of manufactures' hoses. Four Season air conditioning suction hoses are the choice of automotive enthusiasts wanting a great quality product made to provide long-lasting durability.
( 16 )
$16.99
—
$118.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 122 )
$45.99
—
$95.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
