Availability
Showing In Stock Items. Show All 16 Items.
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$50.99
—
$66.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$51.99
—
$98.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 59 )
$50.99
Summit Bucks
ACDelco offers a wide variety of hoses to get your vehicle back on the road. Whether you need to replace fuel, coolant, oil, or vacuum hoses, you can count on ACDelco Gold parts to deliver OE fit and performance. Order the replacement hoses recommended for your application.
( 1 )
$70.99
Skyjacker stainless steel braided brake hoses have been tried and tested in some of the most severe conditions that 4-wheeling has to offer, in virtually every corner of the world. They go the extra mile. They're custom-made to reach all the way down for a snug fit on your Skyjacker lifted truck or SUV. They are proven in their quality of engineering, workmanship, and finish, and are DOT-certified.
( 132 )
$69.39
Mishimoto silicone radiator hoses combine factory fit with modern finish and performance. These trimmable hoses are constructed from 5-layer silicone with heat-resistant fibers for strength and longevity. The hoses are available for many vehicle-specific applications, manual and automatic. Finish your project with these high-quality radiator hoses from Mishimoto.
( 18 )
$57.95
Rein Automotive power steering hoses and lines restore reliable operation to your vehicle. Designed from quality materials, these direct replacement lines offer long-lasting durability, an exact fit, and optimal performance. Restore safe, easy steering with new lines-- Rein Automotive power steering hoses and lines.
( 5 )
$88.99
Trail Gear extended brake lines are a must for lifted vehicles when the stock brake lines are not long enough. They are constructed from extruded PTFE hose with permanently crimped zinc-plated steel fittings. The brake hose is protected from debris and abrasion by a braided stainless steel wire cover. In addition, a clear PVC outer jacket helps to provide extra protection against debris, abrasion, and corrosion. For quality made brake lines that will hold up to your off-roading adventures Trail Gear has you covered.
( 1 )
$99.99
Clearance
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 124 )
$88.99
—
$98.99
Are you doing a spring-over conversion or installing a lift? Trail-Gear brake line sets offer steel braided construction, 26 in. of length, and DOT approval to get the job done. And you can use your factory mounting clips with the front lines. These extended brake line sets available for front axles, rear axles, or a complete set. Stop! Replace your brake lines with Trail-Gear brake lines.
( 1 )
$79.99
More tolerant, more efficient, and 100 percent silicone—Mishimoto radiator hose kits offer a boost of performance and looks under your hood! Combining high-grade silicone and heat-resistant embedded fibers, Mishimoto hoses provide exceptional heat reduction, increased pressure tolerance, and a whole lot of satisfaction. Radiator hose kits are available for a wide range of makes and models in black, blue, red, and limited-edition orange (specific makes only) to enhance the appearance of your engine bay. Some models also include hose clamps. Upgrade the performance and style of your vehicle with superior Mishimoto radiator hose kits.
( 77 )
$101.95
Four Seasons air conditioning suction hoses are your answer for fixing it once and fixing it right. Suction hoses manufactured by Four Seasons are constructed with double-wall barrier hose, gaskets, O-rings, seals, and feature a crimped fitting connection. These hoses meet or exceed the OE-design fitment, form, and function of manufactures' hoses. Four Season air conditioning suction hoses are the choice of automotive enthusiasts wanting a great quality product made to provide long-lasting durability.
( 18 )
$65.99
—
$103.99
Hose assemblies play an important role in A/C system performance by carrying refrigerant and lubrication from one component to another. Poor manufacturing can lead to restricted refrigerant and oil flow to the compressor, resulting in catastrophic system failure. Four Seasons air conditioning discharge hoses are designed to minimize refrigerant loss. Their fittings are permanent beadlock types with lightweight, rust-free aluminum construction. These hoses are made to OEM specifications for a correct fit and each one is 100 percent inspected to ensure bend pipe consistency is maintained through a highly precise CNC-bending machine. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Four Seasons. Features include: * Contains gaskets, O-rings, seals, and charge port fittings to properly replace the hose * Constructed with double-wall barrier hose compatible with R134A or R12 * Hose wall thickness and burst pressure exceeds OE requirements * Application specific design * Tubing meets OE wall thickness and fitting specs * Pad block fittings match OE * Orifice tube meets OE in fit, form, design, and function * Welds and connections are the same as OE with no refrigerant flow restrictions • Ferrule crimp exceeds OE tensile test requirements * All fixed brackets are included on hose assembly
( 53 )
$79.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
