Availability
Showing In Stock Items. Show All 14 Items.
RCV Ultimate IFS CV axles for independent front suspension are designed to overcome the limitations of your axle shafts. They provide increased strength that original equipment axle shafts just can't match--even if you have big tires and big power, there are no worries. Ultimate IFS CV axles are low maintenance, and they meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness, and control of your IFS. Equip your vehicle with RCV race-proven materials and design, so you can "Put the power down with confidence!" Select the Ultimate IFS axle set designed for your vehicle.
( 1 )
$2,299.95
Stock CV axles can fall short on durability and performance under demanding conditions, and ReadyLift analysis shows that factory axles often experience premature wear due to increased stress at steeper angles, limiting performance on lifted configurations. ReadyLift Suspension high performance CV axle kits address these issues with axles purpose-built for the lifted truck life, offering more strength and reliability at an affordable price. But whether your truck is moderately leveled or lifted to the extreme, you can rest assured these ReadyLift CV axle kits are up to the challenge. Elevate your vehicle's performance with ReadyLift CV axle kits. Features and benefits: * Enhanced shaft strength: -- Increased diameter for better resistance to twisting and bending under heavy-load conditions, especially during off-road driving * Advanced CV joint design: -- Replaces the factory tripodal joint with a true CV axle joint, providing smoother articulation and improved energy transfer, reducing wear even at extreme angles * Premium boots and seals: -- High-quality, TRD-inspired boots, clamps, and dust seals keep out dirt and moisture, extending the axle's life and reliability in rugged environments
Not Yet Reviewed
$479.95
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
Beef up your rear-end with Trail-Gear Rock Assault rear axle housings. Better trail performance comes in the shape of fabricated, thick steel center sections and differential mounting surfaces, heavy-duty DOM axle tubes, and 4130 chromoly flanges. Plus, Trail-Gear engages the tubes further into the center section, with a 360 degree gusset welded around the tubes on the inside of the housing, to ensure that your rig is strong enough to go wherever you want! Rock Assault's overall design also offers additional clearance under the axle tubing and differential, providing more height to climb over those big boulders. Outfit your rig to be extremely tough with the rugged, high-clearance design of Trail-Gear Rock Assault rear axle housings.
( 1 )
$1,199.99
—
$1,499.99
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
Do you have a twisted or broken axle? Dorman offers roughly 100 replacement axle shaft kits to remedy the problem. They're available in various styles, as well as dozens of precise lengths and spline counts for direct fitment on any corner of your vehicle. Dorman axles include components manufactured from quality materials—designed to install in the stock location without any modifications. Get your vehicle rolling again with dependable Dorman axle shaft kits.
( 151 )
$650.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$4,599.99
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
