Availability
Showing In Stock Items. Show All 39 Items.
How many degrees of twist will your stock axles handle? Longfield axle shafts beef up your machine's rear with strong chromoly that can handle 120 degrees of twist. Big tires and low crawler gears can and do lead to broken axles. Upgrade your drivetrain with Longfield rear axle shafts. Order the model designed for your vehicle application.
( 6 )
$494.11
Stock CV axles can fall short on durability and performance under demanding conditions, and ReadyLift analysis shows that factory axles often experience premature wear due to increased stress at steeper angles, limiting performance on lifted configurations. ReadyLift Suspension high performance CV axle kits address these issues with axles purpose-built for the lifted truck life, offering more strength and reliability at an affordable price. But whether your truck is moderately leveled or lifted to the extreme, you can rest assured these ReadyLift CV axle kits are up to the challenge. Elevate your vehicle's performance with ReadyLift CV axle kits. Features and benefits: * Enhanced shaft strength: -- Increased diameter for better resistance to twisting and bending under heavy-load conditions, especially during off-road driving * Advanced CV joint design: -- Replaces the factory tripodal joint with a true CV axle joint, providing smoother articulation and improved energy transfer, reducing wear even at extreme angles * Premium boots and seals: -- High-quality, TRD-inspired boots, clamps, and dust seals keep out dirt and moisture, extending the axle's life and reliability in rugged environments
Not Yet Reviewed
$479.95
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$262.99
—
$472.99
Longfield birfield joints are super strong to furnish your rig with a better performance option. They're built from 100 percent chromoly--the housings are forged from 4340 and the internals are 4340, as well, but also heat-treated. The joints are polished with precision to remove any imperfections that may cause stress risers. Beef up your Toyota for climbing with Longfield birfield joints.
( 4 )
$328.92
—
$350.66
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 145 )
$323.99
—
$580.99
There's nothing quite like blazin' the trails! However, if you've ever experienced breaking your manual locking hubs, don't fret—Trail-Gear offers a great fix to nix that problem with their axle drive flange kits. These components are the perfect replacement for your existing 35-spline internal locking hubs or Warn 35-spline manual locking hubs, so you can return to the fun-filled action! Trail-Gear axle drive flange kits include: * Drive flange pucks (4340 chromoly coated with black oxide) * Drive flange covers (billet aluminum and anodized black with Trail-Gear logo) * Rubber O-rings * Hardened snap rings
( 4 )
$399.99
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 141 )
$308.89
—
$541.98
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$297.99
—
$547.99
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 31 )
$258.99
—
$565.99
Trail-Gear Trail-Creeper ring and pinion gears can be relied on, even over the most punishing trails. These are the same gears that have won multiple championships on the W.E. Rock circuit and have proven themselves on some of the most grueling off-road courses in the world. These gears are made from tool-grade 8620 steel and heat-treated for strength and wear resistance. The gear teeth are cut using Gleason CNC gear-cutting technology, producing an unprecedented level of accuracy and surface finish. This allows Trail Creeper gears to transmit more torque with improved fuel efficiency. The higher accuracy and surface finish also produce a quieter-running gear set, which means that they'll work great on your daily driver, too. If you're looking for a gear set that's easy on the wallet, but can handle whatever you throw at it, look to Trail-Creepers from Trail-Gear.
Not Yet Reviewed
$259.00
—
$379.00
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$255.58
—
$525.71
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 49 )
$256.99
—
$548.99
When it comes time to replace your worn-out or failed 4WD differential actuator, look no further than Dorman. These replacement front axle actuators are available in the original vacuum or electric-style, just like OEM. Trust Dorman for the trouble-free engagement of your 4WD system.
( 51 )
$269.95
—
$341.95
Do you have a twisted or broken axle? Dorman offers roughly 100 replacement axle shaft kits to remedy the problem. They're available in various styles, as well as dozens of precise lengths and spline counts for direct fitment on any corner of your vehicle. Dorman axles include components manufactured from quality materials—designed to install in the stock location without any modifications. Get your vehicle rolling again with dependable Dorman axle shaft kits.
( 151 )
$268.99
—
$381.95
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 337 )
$252.99
—
$687.99
Yukon Gear & Axle spider gear kits offer better performance for your differential. Utilizing high-quality materials and better-than-OE design, Yukon spider gears get you through turns with the traction that you need. The kits are available in a variety of carrier styles and are compatible with dozens of axle models, front and rear. Improve your differential with the addition of a Yukon Gear & Axle spider gear kit.
( 69 )
$492.99
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$376.99
—
$481.99
Tired of waiting for your ring and pinions to break-in before towing or hitting the trail? Trail-Gear Trail-Creeper Super Finish ring and pinion gears require absolutely no break-in time. You can install these gears and get right into the action without the worry about premature ring and pinion failure. Select the ring and pinion set in the size and gear ratio needed. Features and benefits: * Made from tool-grade 8620 steel * Heat-treated for maximum strength and wear resistance * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Less friction * Reduced wear allowing bearings and gears to last longer * Treated with REM Isotropic Super Finishing (ISF) process * REM Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra, meaning there is less friction between the gears, reducing wear by 95 percent and allowing the gears and bearings to run cooler and last longer * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements
Not Yet Reviewed
$349.00
—
$409.00
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 103 )
$265.99
—
$533.99
Richmond gear differential carrier rebuild kits include everything you will need to rebuild your differential case—such as spider gears, side gears, thrust washers, cross shaft bolt and pin, and more (depending on kit). These rebuild kits contain precision-machined replacements designed to restore factory-style function. Order the model recommended for your vehicle make and axle application.
( 1 )
$256.99
Yukon Gear & Axle bearing kits offer quality and cost savings. When you don't need a master overhaul, these kits can save you some money. They include Timken bearings and races, along with high-quality small parts--and each kit is checked for the right fit to meet your application and replacement needs. These packages are available for dozens of axle models. So when you're ready to install replacement ring and pinion gears in your differential, start with a dependable bearing kit from Yukon. Yukon Gear & Axle bearing kits include: * Pinion bearings * Carrier bearings * Crush sleeve (where applicable) * Oil baffles and slingers (where applicable) * Pinion seal * Gear marking compound and brush
( 8 )
$285.99
—
$543.99
Clearance
BCA Bearings differential rebuild master kits consist of all the essential high-quality bearings, seals, and other key components necessary to properly complete a rebuild. With extensive coverage of popular applications, BCA differential rebuild master kits are built to meet or exceed OE specifications, ensuring long service life. Order the kit designed to fit your application.
( 6 )
$505.99
$408.50
Clearance
BCA Bearings differential bearing kits consist of all the essential high-quality bearings, seals, and other key components necessary to properly complete a rebuild. With extensive coverage of popular applications, BCA differential kits are built to meet or exceed OE specifications, ensuring long service life. Order the kit designed to fit your application.
( 1 )
$471.99
—
$494.99
$380.50
—
$399.50
Clearance
G2 Axle & Gear master installation kits include everything that you need to properly install your ring and pinion gears. The kits contain top-quality Timken bearings, ring gear bolts, shims, and a pinion seal. They are available in a variety of options for fitment on nearly four dozen axle models.
Not Yet Reviewed
$599.99
$499.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
