Availability
Showing In Stock Items. Show All 20 Items.
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$20.99
—
$36.99
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 56 )
$33.99
Are you setting up a rear-end? These Motive Gear differential carrier shim kits will make the job easier. They come with a variety of shims, so you're sure to find the best fit for your vehicle; plus, they're made of steel for durability. Whether you're installing a new setup or refreshing an old one, you can trust the Motive Gear differential carrier shims designed for your application to make the job a snap.
( 36 )
$27.99
Trail-Gear axle gussets help prevent the bending of your axle housing. These housing braces weld on top of your Toyota front solid axle to provide additional strength. Beef up your front-end with Trail-Gear upper axle gussets.
( 3 )
$39.99
Yukon Gear & Axle pinion shims help seat your pinion gear properly. These steel inner and outer pinion shims assist you in setting up the right depth and preload for your application. If you need pinion shims, Yukon Gear & Axle offer quality and value.
( 19 )
$35.99
Trail-Gear differential stud eliminator kits are the perfect solution for replacing stock axle housing studs that may be pulling loose—resulting in oil leaking from the center of the axle housing. No more do you have to tap and drill the studs out and replace the studs. These kits have been designed to replace the studs with Allen headbolts that won't pull out like the stock studs. The kits come complete with 10 high-strength steel stud fasteners, nuts, washers, and a tube of Ultra Gray Silicon gasket material.
( 2 )
$39.99
Yukon Gear & Axle minimum install kits are perfect when you just need the basics. They're a low-cost solution for gear changes in newer vehicles where the bearings can be reused. Available for a wide variety of applications, the kits come with high-quality components to ensure a smooth setup. Yukon minimum install kits include: * Pinion seal * Crush sleeve (where applicable) * Complete shim kit * Gear marking compound and brush * Pinion nut, O-ring, baffles, slinger (varies by application) * Extensive instruction manual
( 11 )
$39.99
—
$50.99
Major components, such as the ring and pinion, play a starring role in your gear train's operation. However, they couldn't do their jobs properly without a supporting cast, including these differential crush sleeves from Yukon Gear & Axle. The durable steel collars prevent your pinion bearing from being preloaded too tightly—and help prevent the pinion nut from loosening. When the time comes to service your differential, choose Yukon Gear & Axle crush sleeves, available in configurations for dozens of specific axle applications.
( 11 )
$20.99
—
$41.99
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$24.99
—
$46.99
USA Standard Gear Spartan locker crosspins are steel replacements just like the heavy-duty originals and are available for all of their lockers. Install your Spartan locker with these replacement crosspins from USA Standard Gear.
( 1 )
$40.99
The CV (constant velocity) joints of your Toyota connect the drive shafts to the wheels, ensuring the wheels rotate properly when accelerating or turning corners. Protecting the joints from the elements and damage are boots. They also help keep the joints properly lubricated. All-Pro Off-Road OEM CV boot kits replace torn deteriorating boots with durable neoprene that is stronger than natural rubber, as well as flexible, weather resistant, and chemical resistant. Available in kits for inner and/or outer boot replacement, All-Pro's CV boot kits are packaged with the necessary clips, clamps, and in most all kits, packets of CV joint grease. Kits are also available with or without crimp pliers. For years of worry-free operation, select an All-Pro Off-Road OEM CV boot kit designed for your Toyota.
( 1 )
$49.99
The 8 in. IFS clamshell differential has frustrated owners with its vibrations and droning hums, often due to the thin and weak driver's side CV shaft differential needle bearing, which doesn't handle side loads effectively. Trail-Gear needle bearing eliminators or clamshell bushings replace weak needle bearings that could fracture and ruin your gears. These 8 in. clamshell needle bearing eliminators are the best way to correct the faulty design and eliminate its weakness for good. They are made from PTFE-impregnated and lined sintered bronze, providing an almost 10mm longer contact surface length to eliminate side load deflection. With a durable SAE 1020 steel backing, they should outlast the lifetime of your CV joints. Benefits: * Replaces weak stock needle bearing on driver's side of specified vehicles * Solid, self-lubricating bushing design greatly reduces axle runout * Less runout reduces or eliminates vibration and noise * Extended length provides increased bearing surface
Not Yet Reviewed
$49.99
To borrow a line from the candy bar commercial, sometimes you feel like a nut… And when that particular need arises, Yukon Gear & Axle pinion nut washers are a quality choice. Maybe your old pinion nut washer is corroded, too loose, or broken altogether—all good reasons for a Yukon replacement. They're machined to OEM specifications and made from quality materials for durability. Order the replacement washers recommended for your axle application.
( 6 )
$21.99
Certain high numeric ratio gear sets require special notched crosspins for proper installation. These Yukon Gear & Axle crosspins and shafts are made for some of the Yukon-designed ring and pinion sets that need aftermarket crosspins and shafts to work with their parts. The differential components are available for more than two dozen axle models, so match your vehicle to the proper direct-fit replacement. They're manufactured from hardened steel or chromoly for maximum durability.
( 10 )
$33.99
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$69.99
Powertrax cross shaft pins are quality components for your Lock Right differential. These hardened steel pins are specifically designed for use with your Powertrax Lock Right locker.
( 3 )
$33.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
