Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Trail-Gear FJ-80 Tie Rod Ends
Off-roading can be such an adrenaline rush! Unfortunately, it can also take its toll on your vehicle's suspension. No worries, Trail-Gear heavy-duty FJ-80 tie rod ends are available in right-hand threaded and left-hand threaded applications to keep your suspension fine-tuned for trail blazing action. They're greased to ensure the flow of lubrication throughout the part and are sealed to keep out dirt. A cotter pin and jam nut are included. Get the most out of your off-road experience with Trail-Gear suspension parts!
( 4 )
$29.99
Trail-Gear Shock Mounts
Mount up and hit the trails with Trail-Gear front or rear lower shock mounts. They're ideal for use on a straight axle swap and are made of thick 3/16 in. plate steel. The curved bottoms weld directly to the axle housing, horizontally or vertically, with 1/2 in. mounting holes.
( 6 )
$39.99
Trail-Gear Transfer Case Shifter Boots
Keep the hole that leads to your transfer case covered with Trail-Gear shifter boots. These boots come in either a twin shift or standard version for Toyota 4x4s. They provide flexible rubber shells to allow full movement of the shifter, while keeping harmful gases out of the cab. The twin shift version also includes a steel bottom plate for easy mounting.
( 5 )
$49.99
Trail-Gear Speedometer Adapters
Trail-Gear speedometer adapters remedy issues with adapting your electrical speedometer to the transfer case. These cable adapters convert a Toyota mechanical speedometer sensor to an electrical speedometer sensor—by just screwing it onto your mechanical speedometer sensor and plugging it into the sensor wiring harness on your vehicle. Trail-Gear speedometer adapters accept standard Toyota 3-pin speedometer sensor plugs. Order the model designed for your vehicle application.
( 1 )
$49.99
Trail-Gear Trail-Safe Axle Seals
Trail-Gear Trail Safe axle seals are most effective in keeping your machine leak-free. If you're tired of dealing with inner axle seal leaks, these TG Trail Safe seals feature an inner seal lip totally supported by a garter spring applying constant force over the full 360 degree circumference, not allowing deflection gaps. The outer seal lip acts as a secondary seal and keeps debris and other contaminants away from the inner seal lip. The outer diameter is 100 percent rubber coated so that it forms a complete static surface seal. These features result in zero leaks. Leak or no leaks, the choice is yours--make your choice Trail-Gear axle seals.
( 2 )
$29.99
Trail-Gear Individual Brake Lines
Trail-Gear individual brake lines are available for front or rear applications. These replacement hoses are constructed from braided steel with threaded ends, and they're DOT-approved. The front lines utilize your factory mounting clips, so there are no modifications needed. Order the brake lines tailored for fitment on your vehicle.
Not Yet Reviewed
$39.99
Trail-Gear Brake Rotors
Trail-Gear offers a selection of quality brake rotors in both solid surface and cross-drilled and slotted models. Choose from rear disc brake kit replacements, trail spares, stock replacements, and cast iron models for those of you installing a solid front axle and who want to use your existing larger IFS calipers. TG is ready to help maintain your braking effectiveness with their Trail-Gear brake rotors.
( 2 )
$49.99
Trail-Gear Backing Plate Eliminator Kits
Replace your factory brake backing plate with Trail-Gear backing plate eliminator kits. These TG spacer rings are the same thickness as your stock, and they take their place to eliminate trail damage and small rocks from getting trapped between the plate and rotor. Are you still cutting the center out of your stock plate? Next time you're servicing the knuckle, install Trail-Gear backing plate eliminator kits for a cleaner way to accomplish the same thing.
( 3 )
$39.99
Trail-Gear Leaf Spring Bushings
Replacement bushings designed to fit Trail-Gear leaf springs are made of polyurethane to slide over the bolt smoothly with just the right amount of give to prevent your fittings from falling out when you're greasing up. Polyurethane is harder and stronger than rubber for durability and ride quality. Restore positive handling and control with Trail-Gear bushings. (Note: Make sure the grease you use is compatible with polyurethane.)
( 4 )
$49.99
Trail-Gear Bump Stops
Avoid over-flexing your leaf springs and shocks with Trail-Gear bump stops. These durable polyurethane components can be welded or bolted in place. Trail-Gear recommends welding your bump stops to the top of the U-bolt flip kit plate.
( 3 )
$39.99
Trail-Gear Axle Housing Braces
Trail-Gear axle gussets help prevent the bending of your axle housing. These housing braces weld on top of your Toyota front solid axle to provide additional strength. Beef up your front-end with Trail-Gear upper axle gussets.
( 3 )
$39.99
Trail-Gear Creeper U-Joints
Stock drive shaft U-joints aren't designed for rock climbing or other off-road tortures. When you need tough U-joints for crawling up and over rock ledges or through the deepest mud, use Trail-Gear Creepers. These heavy-duty joints are tested to 4,700 ft.-lbs. of torque due largely in part to additional material being added to the center section. Unlike other strong off-road joints, these are originally based on stock designs, making them better for all-around use than many other joints. They include a Zerk fitting and four installation clips. Trail-Gear Creeper U-joints have torque ratings around 1,000 ft.-lbs. higher than stock units, yet cost around the same. They're an incredible deal!
( 1 )
$39.99
Trail-Gear Leaf Spring Hangers
Easy to install and tough as nails, Trail-Gear leaf spring hangers will allow you to move the hangers on the frame and install longer springs. Front and rear hangers are available to make this upgrade optimal. They will be much stronger than your stock hangers.
( 7 )
$39.99
Trail-Gear Differential Carrier Drop Spacers
Trail-Gear differential carrier drop spacers and shims replace the crush sleeve and prevent the loosening of the gear setup preload. They take a little longer to set up, but you won't have to keep retorquing the pinion nut down the road to keep the proper angle on the CV joints and boots. With their easy-to-follow installation instructions, you can install these kits and be back on the trail with a smoother ride in minutes.
( 7 )
$29.99
Trail-Gear Steering U-Joints
Trail-Gear steering U-joints are designed for their Tacoma SAS steering shaft. These heat-treated steel U-joints include hardware to easily connect shaft to steering column.
( 1 )
$49.99
Trail-Gear Matsuba U-Joints
U-joints act as a pivot point, allowing them to continue transmitting power even when at an angle, and Matsuba universal joints are the gold standard at which all other Toyota aftermarket joints are judged. Trail-Gear Matsuba U-joints are offered as OEM replacements for your stock or mildly modified vehicle or as an upgrade for those of you whose off-roading adventures would result in any type of joint snapping. Most universal joints include zerk grease fitting and all include C-clips. Toyota, Suzuki, and Chevy applications are available. Select the Trail-Gear U-joint designed for your vehicle.
( 3 )
$39.99
Trail-Gear Speaker Brackets
Set the tone for your next adventure with Trail-Gear speaker brackets. Crafted from durable 11-gauge ASTM A36 steel and available in two styles, these brackets are engineered to keep your 6 1/2 in. or 6 x 9 in. speakers securely in place. Compatible with a wide range of aftermarket speakers, these rear speaker brackets ensure uninterrupted beats during every adventure. Replace your broken or missing speaker brackets with a pair of Trail-Gear brackets. Mounting hardware is included. Select the brackets designed for your speakers.
Not Yet Reviewed
$49.99
Trail-Gear Replacement Brass Axle Bushings
Trail-Gear replacement brass axle bushings are perfect in size, easy to install, and strong to last long. These OEM replacement fittings will cure leaky front axles and keep them centered in the housing. Trail-Gear quality off-road products and accessories are available direct to you.
( 6 )
$29.99
Trail-Gear Bump Stop Extension Kits
Trail-Gear bump stop extension kits help cushion your suspension, preventing bottoming-out and the extensive damage that can result from tire to body contact. Stop over-flexing your shocks and leaf springs. There are two bump stops and two extensions in each kit. The bump stops are welded to the top of the U-bolt flip plates and the extensions are welded directly to the frame.
Not Yet Reviewed
$49.99
Trail-Gear Differential Stud Eliminator Kits
Trail-Gear differential stud eliminator kits are the perfect solution for replacing stock axle housing studs that may be pulling loose—resulting in oil leaking from the center of the axle housing. No more do you have to tap and drill the studs out and replace the studs. These kits have been designed to replace the studs with Allen headbolts that won't pull out like the stock studs. The kits come complete with 10 high-strength steel stud fasteners, nuts, washers, and a tube of Ultra Gray Silicon gasket material.
( 2 )
$39.99
Trail-Gear Adjustable Panhard Brackets
Due to recent customer demand Trail-Gear now offers adjustable panhard brackets to allow for different levels of drop to fine-tune your suspension. The brackets are laser-cut from steel and formed and includes four sets of holes to mount the panhard to provide users more freedom in mounting suspension. Shipped unfinished and un-welded, these brackets can be easily trimmed down to the desired length. Welding required for installation. For a well-aligned suspension, use Trail-Gear adjustable panhard mounts.
( 1 )
$29.99
Trail-Gear Frame Tubes and Jigs
Trail-Gear frame tubes and jigs are used for solid axle swaps on Toyota trucks and 4Runners originally equipped with independent front suspension (IFS). The jigs correctly position the frame tubes into IFS-style frames for hanging shackles through the frame and mounting leaf springs. The frame tubes accept stock Toyota front bushings.
Not Yet Reviewed
$29.99
—
$39.99
Trail-Gear Premium Brake Pads
Trail-Gear premium brake pads restore stopping performance and safety. These first-rate TG pads are semi-metallic, asbestos-free, front replacement brake pads for your Toyota. They are sold in sets of 4 pads.
( 1 )
$29.99
Trail-Gear Spindle Stud Kits
Trail-Gear spindle stud kits eliminate the problem of lining up gaskets and hardware by removing the stock bolts and replacing the spindle hardware with studs. These studs are stronger than stock replacement spindle bolts, providing great strength without breaking the bank. Each stud is machined from a proprietary alloy made exclusively for Trail-Gear, manufactured to strict specifications. They should be your first choice for spindle hardware replacement or upgrade. Order a set with natural or zinc plated finish.
( 1 )
$39.99
