Availability
Showing In Stock Items. Show All 34 Items.
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$50.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$53.99
—
$92.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
—
$58.99
Beck/Arnley air charge temperature sensors offer you the peace of mind of knowing that you have high-quality, direct fit OE replacements. That means that you can install them easily and you're ready to go, knowing that they will perform just as expected. They are made from premium materials that include corrosion resistant terminals and coatings to ensure a long life. Is your car idling rough or stalling at red lights? Maybe you need a new air temperature sensor, and Beck/Arnley is the brand that gets it right. The right temperature for the right mix of air and fuel with their engine management parts made right.
Not Yet Reviewed
$62.99
Summit Bucks
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$52.99
—
$104.99
Granatelli spark plug wires utilize an exclusive solid stainless connector cable with stainless snap-lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near 0 ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures of up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. The assembled wires are engineered to exceed OEM specifications and to be OBD-II computer safe. Order the set designed for your vehicle application.
( 55 )
$81.30
Increase your miles per gallon by up to 15 percent with a set of these Granatelli Motor Sports MPG Plus spark plug wires. They feature zero Ohms per foot of resistance and a solid stainless steel inner core for maximum conductivity. The wires provide faster engine startup and a smoother running engine, as well as increased horsepower and torque. Go green and install a set of Granatelli Motor Sports MPG Plus spark plug wires on your daily driver or high performance vehicle.
( 13 )
$81.30
Summit Bucks
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$56.99
—
$118.99
Denso ignition wire sets fit right, look right, and work perfectly. Their end caps are identical to OE and are designed to "click" into place for easy installation and a secure fit. An installer can feel and hear that a solid connection has been made, even in a difficult-to-see location. Through a patented process, the terminals are attached with an extremely strong connection ensuring the cable and boot will not separate during removal and installation. Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box. Denso 7 and 8mm ignition wire sets are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40 to 428 degrees F and pass tests covering everything from electrical properties, to shrinkage, to chemical resistance, and accelerated life testing. Features and benefits of Denso Ignition Wire Sets include: * High-temperature silicone jacket to withstand heat, cold, chemicals, and moisture * Reinforcing member for added strength and terminal retention * Silicone insulation for superior dielectric and heat performance * Conductive silicon layer on 7 and 8mm wires for high-temperature performance and EMI/RFI noise suppression * Fiberglass braid for maximum strength on 7 and 8mm wires * Carbon-impregnated fiberglass core for superior conductivity on 7 and 8mm wires * Core reinforced with KEVLAR® on smaller diameter wires * Conductive layer impregnated with Ferrite on smaller diameter wires * Wire-wound layer on smaller diameter wires to suppress EMI/RFI noise * Superior dielectric and thermal qualities * Factory-original fit, appearance, and performance * World-class chemical and oil resistance
( 13 )
$55.99
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 61 )
$84.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 100 )
$128.99
Standard Motor offers stock replacement electrical switches for dozens and dozens of functions on your vehicle. Over 700 models are available. These switches feature copper alloy conductors to ensure superior electrical conductivity with low resistive losses. They are 100 percent tested to verify both mechanical and electrical switching performance. Their robust design and high-grade materials meet the stringent demands of today's vehicles and service professionals. The switches meet or exceed OEM specifications for accurate, maintenance-free operation. Don't take chances with aging or questionable electrical switches that can leave you stranded. Order the correct replacements from Standard Motor.
( 2 )
$66.99
Beck/Arnley ignition coils are high-quality replacements, available in styles such as coil pack, E-core, canister, and C-core. These OE-type direct-fit coils will deliver the spark your engine needs to run efficiently. Order the model designed for your vehicle application.
( 9 )
$66.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$80.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
