Availability
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 133 )
$11.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$20.99
—
$234.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 504 )
$15.99
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 41 )
$450.95
PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls
( 34 )
$12.31
—
$204.78
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 39 )
$7.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 52 )
$45.99
—
$92.99
These Proform stainless steel oil dipsticks feature an ultra-sleek, thin profile to provide maximum clearance. They are CNC-machined from billet stainless steel to stay bright and rust-free. The dipsticks feature an O-ring seal to keep dirt and moisture out, and the braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 23 )
$52.99
—
$56.99
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 10 )
$25.44
—
$306.70
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$14.99
—
$69.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$97.99
—
$185.99
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 45 )
$63.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 133 )
$26.99
—
$261.99
PRW harmonic damper bolts help hold your balancer properly locked in place as they absorb the massive energy from crankshaft flexing. Professionally designed to withstand 180,000 psi fastener yield strength, they also include a wide-area 1/4 in. thick washer to further spread the fastening load. For installation ease, these bolts feature a deep-socket, 12-point head-style so your torque wrench stays fully engaged up to spec. Show your knuckles some mercy--complete your install with PRW harmonic damper bolts. Order the bolt recommended for your specific vehicle and engine size.
( 9 )
$20.04
ATP timing covers are a crucial part of any engine. They allow for the proper lubrication of the timing chain and protect it from damage. Timing covers can become damaged from over-tightening or corrosion, causing engine oil leaks—and resulting in significant engine damage. ATP timing covers function and fit just like the original parts, ensuring long life and durability. Order the model recommended for your vehicle and engine application.
( 32 )
$108.99
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$121.99
—
$123.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$78.99
—
$164.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 78 )
$14.99
—
$25.99
PRW Pro Series billet aluminum rocker arms offer outstanding power and performance advantages for street, strip, and track applications. Laboriously made from high-strength 6061 T-6 aluminum extrusions, each piece is precision CNC-machined, and hand-finished to ensure the quality you expect from PRW. These stud-mount rockers are purposely machined to graciously allow for larger springs and retainers, with full-cage, friction-reducing needle bearings for added durability. PRW Pro Series billet aluminum rocker arms are used around the world by professional racers, engine builders, and hot rod enthusiasts. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Heat-treated steel nose rollers and shafts minimize wear between roller tip and valve stem * Rated at 750 lbs. open spring pressure * Internal oiling system for long-lasting performance * Distinctive blue anodized finish
( 13 )
$261.12
—
$370.01
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 35 )
$82.99
—
$96.99
PRW billet rocker arm stud girdles are made from 6061-T6 aluminum, manufactured to exacting standards, and the solution to valvetrain instability. PRW stud girdles reduce rocker stud flex to retain critical valve lash adjustments. The result is more accurate valve lift and timing. PRW stud girdles are relieved at the factory to accommodate crankcase evacuation components without the need to visit your local machine shop. These products come complete with PRW RockerLocs. Grab yours today!
( 9 )
$190.92
Replace your corroded or cracked timing cover with one of these Pioneer aluminum timing covers. All Pioneer aluminum timing covers are cast and machined to the highest factory specs for a perfect fit every time.
( 20 )
$146.99
PRW High Performance Sportsman harmonic dampers are cast from nodular iron, and are suitable for engines generating up to 400 hp. Unlike most OEM dampers, the hub and ring are splined to prevent radial movement of the outer ring. These dampers are 30 percent stronger than OEM dampers made from gray iron. With the combination of top-quality and affordability, these PWR dampers really raise the bar in the high performance industry. Features and specs include: * Ideal for street rebuilds * Accurate crank bore for a proper pressed-fit * Externally balanced dampers include removable counterweights * Available in black with laser-etched timing marks * Not SFI-certified
( 37 )
$141.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
