SUBARU OUTBACK Transmission & Drivetrain

ACT Heavy-Duty Clutch Kits

ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.

4.54 out of 5 stars ( 87 )

$565.00

—

$1,254.00

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$671.37

—

$1,458.09

Exedy OE Clutch Kits

Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.

4.5 out of 5 stars ( 14 )

$336.18

—

$438.35

VEGE Remanufactured Torque Converters

VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.

4.11 out of 5 stars ( 61 )

$118.99

—

$148.99

LuK Clutch Flywheels

LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance. Manufactured to OE specifications, pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing, offering a smooth, flat surface crucial for proper clutch operation. They are engineered and built with quality materials for a longer service life. Select the disc diameter and ring gear tooth quantity needed for your application.

4.12 out of 5 stars ( 125 )

$97.99

—

$291.99

Dorman Automatic Transmission Torque Converter Lock-Up Solenoids

Dorman automatic transmission torque converter lock-up solenoids are engineered to precise specifications and designed to match the fit and function of the original equipment solenoid on specified Subaru vehicles. On certain Subaru vehicles, when varnish buildup or a short circuit causes the torque converter clutch solenoid to fail, the dealership requires replacing the entire valve body assembly. This Dorman OE FIX automatic transmission torque converter lock-up solenoid allows replacement of just the solenoid, instead of the entire valve body assembly, saving you a significant expense.

Not Yet Reviewed

$57.99

Competition Clutch Stage 2 Clutch Kits

Competition Clutch offers Stage 2 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. The kits provide up to 80 percent increase in torque capacity and are properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. State 2 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Not Yet Reviewed

$725.00

Clearance

LuK Clutch Kits

Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.

4.42 out of 5 stars ( 384 )

$216.99

—

$539.99

XClutch Chromoly Lightweight Flywheels

XClutch chromoly lightweight flywheels are explosion-proof and designed to meet SFI specification 1.1. They come with an integral ring gear and timing sensor ring, if applicable. These flywheels have been engineered to the highest standards—and are available in a range of configurations for various performance street and track applications. Whether it's for a modified street car, dedicated race car, or an off-road 4x4, XClutch flywheels provide the ultimate solution for your specific vehicle. These replacements feature premium quality materials for strength and weight reduction. XClutch lightweight flywheels are the choice for many top motorsport teams and tuners from around the world. Order the model recommended for fitment on your car or truck.

4.0 out of 5 stars ( 1 )

$357.69

Clearance

WIX Filters Oil Filters

WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.

4.84 out of 5 stars ( 394 )

$9.99

Competition Clutch Stock Clutch Kits

Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.

Not Yet Reviewed

$595.00

Competition Clutch Stage 3 Clutch Kits

Competition Clutch offers Stage 3 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Dodge, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. These kits provide up to 150 percent increase in torque capacity. The segmented ceramic material with a performance pressure plate will provide the ultimate grab in street and strip combinations. They provide quick but smooth engagement and extended life. Stage 3 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with segmented ceramic facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

5.0 out of 5 stars ( 1 )

$795.00

Clearance

WIX Filters Transmission Filters

WIX transmission filters protect automatic transmissions against contaminants in the transmission fluid. Proper filtration helps improve transmission life by minimizing wear and preventing sticking and scoring of sensitive shift control valves. In the event of a part failure, WIX transmission filters also guard against secondary damage to other parts, possibly minimizing additional repair costs. Order the replacement model designed for fitment with your vehicle application.

4.46 out of 5 stars ( 122 )

$7.99

ATP Automatic Transmission Inline Filter Kits

ATP automatic transmission inline filter kits will keep your transmission fluid clean. Foreign particles can cause premature transmission wear. These quality inline filters will do the job and are easy to install. Kits include hoses, clamps, and instructions. Sift out the bad and keep your transmission happy with inline filters from ATP.

4.25 out of 5 stars ( 12 )

$24.99

—

$28.99

XClutch Stage 2 Clutch Kits

XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.

Not Yet Reviewed

$702.52

—

$1,765.31

Moog Wheel Bearing and Hub Assemblies

Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts

4.73 out of 5 stars ( 707 )

$111.99

—

$114.99

BCA Bearings by NTN Wheel Bearing and Hub Assemblies

BCA Bearing by NTN wheel bearing and hub assemblies are premium OE-quality units with application-specific design and engineering for reduced noise, vibration, and harshness, as well as extended life. BCA Bearing by NTN wheel bearing and hub assemblies will include one of their superior Gen 1, Gen 2, and Gen 3 hubs—high-quality wheel end replacement parts for domestic and import vehicles.

4.67 out of 5 stars ( 3 )

$177.99

FAG USA Clutch Release Bearings

FAG USA develops and produces high-quality release bearings, roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications. Their clutch release bearings (throwout bearings) are made from high-quality materials to the correct specs, continuing to help your vehicle's engine disengage from the wheels when you depress the clutch pedal. Available to fit a wide range of vehicles, choose the one designed for your vehicle to restore proper clutch operation.

Not Yet Reviewed

$48.99

—

$60.99

Sachs Stock Replacement Flywheels

Replace your worn-out or malfunctioning flywheel with one of Sachs Stock Replacement flywheels. These quality components are built to OEM specifications to offer the same fit, form, and function as the factory part, which means a safer, more comfortable, and contemporary drive. All Sachs Stock Replacement flywheels are designed to provide superior performance and dependability to help restore your vehicle back to its proper operation. Choose the replacement flywheel designed to fit your application needs.

3.0 out of 5 stars ( 2 )

$94.99

GSP New CV Axle Assemblies

GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance

3.89 out of 5 stars ( 93 )

$50.50

—

$210.99

ACT Roller Pilot Bearings

When you're installing a new clutch, these ACT pilot bearings are made to obtain less friction and longer life out of your clutch assembly. These high-quality roller bearings are available for a variety of popular applications.

5.0 out of 5 stars ( 3 )

$7.00

Timken Wheel Bearing and Hub Assemblies

Timken Bearing wheel bearing and hub assemblies are the key to restoring your vehicle's smooth and safe ride. They're made to meet or exceed OEM specifications and are available for a variety of domestic and import vehicles. ABS sensors are included where necessary. Order the replacement model needed for your application.

4.59 out of 5 stars ( 249 )

$124.99

Clearance

Dorman CV Joint Boots

Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.

1.67 out of 5 stars ( 3 )

$26.99

$23.50

—

$23.99

Sachs Stock Replacement Clutch Slave Cylinders

Replace your worn-out clutch slave cylinder with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component. The clutch actuation system for cars transfers the pressure of the driver's foot on the pedal to the clutch. As result, this ensures absolute reliability, meet ergonomic requirements, and provides a high level of comfort throughout its entire service life. The actuation system includes the hydraulic transmission path with master and slave cylinder, as well as the mechanical part with the clutch release bearing and the lever. All Sachs clutch slave cylinder components are designed to provide superior transmission shifting and dependability to help you restore your vehicle back to its proper operation. Select the model for your application needs.

5.0 out of 5 stars ( 2 )

$34.99

—

$54.99