SUBARU IMPREZA Transmission & Drivetrain

ACT Heavy-Duty Clutch Kits

ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.

4.54 out of 5 stars ( 87 )

$565.00

—

$1,204.00

Exedy OE Clutch Kits

Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.

4.5 out of 5 stars ( 14 )

$170.03

—

$512.12

Exedy OE Flywheels

Exedy offers OE flywheels for a variety of applications, including many Honda©, Acura©, Subaru, Scion models from early 2000s and up. Flywheel hot spots can cause chatter—and resurfacing a flywheel doesn't always remove hot spots. The flywheel may appear fine, but the hot spots will often still be there. These stock replacements are machined from ductile iron in different sizes and configurations. They smooth the power output in reciprocating engines, store and deliver energy at higher rates than the source, and control the orientation of a mechanical system using gyroscope and reaction wheel. It's often recommended to replace both the flywheel and clutch at the same time. Order the flywheel designed for your vehicle.

3.0 out of 5 stars ( 2 )

$123.14

—

$179.98

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$435.07

—

$1,458.09

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$1,184.87

—

$1,548.21

Competition Clutch Stage 3 Clutch Kits

Competition Clutch offers Stage 3 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Dodge, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. These kits provide up to 150 percent increase in torque capacity. The segmented ceramic material with a performance pressure plate will provide the ultimate grab in street and strip combinations. They provide quick but smooth engagement and extended life. Stage 3 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with segmented ceramic facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

5.0 out of 5 stars ( 1 )

$575.00

—

$795.00

XClutch Stage 1 Clutch Kits

XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.

3.6 out of 5 stars ( 5 )

$542.48

—

$2,233.98

VEGE Remanufactured Torque Converters

VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.

4.13 out of 5 stars ( 62 )

$148.99

Summit Bucks

Action Clutch Chromoly Lightweight Flywheels

Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and race applications, Action Clutch chromoly flywheels offer three major benefits: Low weight, low inertia, and high thermal capacity. Made from durable one-piece billet chromoly steel or chromoly steel forgings, they are specifically made for light- to high-tuned racing cars that see drag racing, drifting, autocross, street use, and rally events, and specifically designed for a reduction in weight and inertia for better engine response. Each flywheel has gone through—and passed--engineering tests up to 15,000 to18,000 rpms, and are heat treated for extreme durability, saving you money by resurfacing multiple times.

1.0 out of 5 stars ( 1 )

$339.96

ACT Streetlite Xact Flywheels

ACT Streetlite Xact flywheels are designed to provide significantly improved engine response and acceleration at an affordable price. Order the model designed for your vehicle application. Features: * Lighter and stronger than OE flywheels * Better drivability and durability * Recommended for street use and drag racing * Designed using the latest CAD and Finite Element Analysis software * CNC-machined and dynamically computer-balanced for smooth operation at extremely high rpm * Entire forgings are heat-treated for strength and toughness * Tight tolerances for fit, concentricity, and parallelism * Adequate material behind the friction surface for excellent heat capacity * One-piece construction for reduced failure and uniform, efficient heat transfer—no more warped inserts * Integral ring gears are induction-hardened for longer gear life and weight reduction where it matters most—eliminates gear breakage or separation * Ring gears are cut with lead-in chamfers for better starter engagement and to prevent rounding-off gear teeth * SFI-certified

4.94 out of 5 stars ( 36 )

$368.00

—

$476.00

Competition Clutch Lightweight Flywheels

Competition Clutch steel flywheels are made of 4140 forged steel and are one-piece designs, which helps significantly in reducing the chances of ring gear separation and friction surface warpage. Forged steel flywheels work with all performance and stock clutch assemblies, and can be resurfaced. Competition Clutch lightweight steel flywheels are recommended for naturally aspirated and/or street driven applications. They preserve low-end torque and drivability, and are well suited for Gravity, Stage 1, and Stage 2 clutch applications.

Not Yet Reviewed

$295.00

—

$350.00

BCA Bearings by NTN Wheel Bearing and Hub Assemblies

BCA Bearing by NTN wheel bearing and hub assemblies are premium OE-quality units with application-specific design and engineering for reduced noise, vibration, and harshness, as well as extended life. BCA Bearing by NTN wheel bearing and hub assemblies will include one of their superior Gen 1, Gen 2, and Gen 3 hubs—high-quality wheel end replacement parts for domestic and import vehicles.

4.67 out of 5 stars ( 3 )

$141.99

—

$157.99

Dorman Automatic Transmission Torque Converter Lock-Up Solenoids

Dorman automatic transmission torque converter lock-up solenoids are engineered to precise specifications and designed to match the fit and function of the original equipment solenoid on specified Subaru vehicles. On certain Subaru vehicles, when varnish buildup or a short circuit causes the torque converter clutch solenoid to fail, the dealership requires replacing the entire valve body assembly. This Dorman OE FIX automatic transmission torque converter lock-up solenoid allows replacement of just the solenoid, instead of the entire valve body assembly, saving you a significant expense.

Not Yet Reviewed

$57.99

Competition Clutch Stage 2 Clutch Kits

Competition Clutch offers Stage 2 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. The kits provide up to 80 percent increase in torque capacity and are properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. State 2 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Not Yet Reviewed

$495.00

—

$725.00

The Driveshaft Shop Level 5 Axles

These Driveshaft Shop Level 5 axle systems have been the most copied drivetrain components for front wheel drive cars to date because they work great and are very affordable. The bar has been raised for these Level 5 axles. They use the 1.4 O.D. outer CVs from the Level 6 systems, and have made the center bar larger by changing from 1 in. to 1.125 in. (now 34-tooth). They also feature a redesigned inner CV with an even larger tripod design. These systems are made to handle up to 800 hp and 28 in. tires.

Not Yet Reviewed

$556.48

—

$572.23

LuK Clutch Kits

Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.

4.42 out of 5 stars ( 384 )

$183.50

—

$1,023.99

ACT Throwout Bearings

ACT throwout bearings are the same high-quality bearings included in your ACT clutch kits. They are available separately for every kit made by Advanced Clutch Technology and are perfect for replacing lost or damaged bearings.

4.27 out of 5 stars ( 11 )

$96.00

—

$122.00

XClutch Chromoly Lightweight Flywheels

XClutch chromoly lightweight flywheels are explosion-proof and designed to meet SFI specification 1.1. They come with an integral ring gear and timing sensor ring, if applicable. These flywheels have been engineered to the highest standards—and are available in a range of configurations for various performance street and track applications. Whether it's for a modified street car, dedicated race car, or an off-road 4x4, XClutch flywheels provide the ultimate solution for your specific vehicle. These replacements feature premium quality materials for strength and weight reduction. XClutch lightweight flywheels are the choice for many top motorsport teams and tuners from around the world. Order the model recommended for fitment on your car or truck.

4.0 out of 5 stars ( 1 )

$357.69

—

$467.32

Clearance

WIX Filters Oil Filters

WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.

4.84 out of 5 stars ( 394 )

$9.99

Competition Clutch Stock Clutch Kits

Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.

Not Yet Reviewed

$450.00

—

$595.00

Clearance

WIX Filters Transmission Filters

WIX transmission filters protect automatic transmissions against contaminants in the transmission fluid. Proper filtration helps improve transmission life by minimizing wear and preventing sticking and scoring of sensitive shift control valves. In the event of a part failure, WIX transmission filters also guard against secondary damage to other parts, possibly minimizing additional repair costs. Order the replacement model designed for fitment with your vehicle application.

4.46 out of 5 stars ( 122 )

$7.99

GSP New CV Axle Assemblies

GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance

3.89 out of 5 stars ( 93 )

$68.99

—

$210.99

ATP Automatic Transmission Inline Filter Kits

ATP automatic transmission inline filter kits will keep your transmission fluid clean. Foreign particles can cause premature transmission wear. These quality inline filters will do the job and are easy to install. Kits include hoses, clamps, and instructions. Sift out the bad and keep your transmission happy with inline filters from ATP.

4.25 out of 5 stars ( 12 )

$27.99

—

$28.99

XClutch Stage 2 Clutch Kits

XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.

Not Yet Reviewed

$632.92

—

$2,390.21