Selected Filters


Loading...

Availability


STUDEBAKER CRUISER Engines & Components

Part Groups

Results 1 - 20 of 20

Sealed Power Hydraulic Lifters

Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.

4.24 out of 5 stars ( 58 )

$14.99

K&N Performance Gold Oil Filters

Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.

4.83 out of 5 stars ( 536 )

$17.99

—

$19.99

Clevite H-Series Rod Bearings

Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

4.8 out of 5 stars ( 176 )

$12.99

—

$18.99

WIX Filters Oil Filters

WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.

4.83 out of 5 stars ( 412 )

$13.99

—

$16.99

On Sale

Proform Chrome Engine Oil Dipstick Kits

Available for a wide selection of popular engines, Proform chrome engine oil dipsticks kits consist of both the stick and the tube. These kits have classic hook handles.

3.93 out of 5 stars ( 97 )

$10.99

Melling Valves

It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.

4.53 out of 5 stars ( 55 )

$10.99

Dayco High Performance V-Belts

Dayco High Performance V-belts deliver more flexibility and increased airflow around the accessory drive belt, so they run cooler and last longer than most competitive belts. Dayco was one of the first to develop raw edge sidewall construction, which facilitates controlled slippage around pulleys. This feature ensures the superior performance that drivers demand from their vehicle. The V-belts' three plies of neoprene-impregnated fabric resist heat, oil, and grease. A specially formulated treatment of the polyester cord provides the strength, stability, and reliability that's required within the standards of today's industry.

4.82 out of 5 stars ( 92 )

$15.99

—

$19.99

MotoRad Crankcase Breather Caps

MotoRad crankcase breather caps provide the oil circulation and air ventilation that your engine needs to run properly. Made from heavy-duty steel, MotoRad caps perform well under pressure. Many of these direct fit, high-quality crankcase breather caps are given a zinc plated finish for optimal rust resistance. Get replacements that perform and fit like the originals--MotoRad crankcase breather caps.

5.0 out of 5 stars ( 4 )

$10.99

Standard Motor PCV Valves

Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.

4.63 out of 5 stars ( 56 )

$14.99

King SI-Series Rod Bearings

King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.

4.58 out of 5 stars ( 106 )

$16.99

—

$19.99

COMP Cams Xtreme Energy DLC Solid Flat Tappet Lifters

COMP Cams offers Xtreme Energy DLC solid flat tappet lifters for a wide range of vehicles, including many Buick, Cadillac, Chevrolet, Oldsmobile, Ford, Chrysler, AMC, and Pontiac models from the 1950s, '60s, '70s, and '80s. They are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. The tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters

Not Yet Reviewed

$10.99

Fel-Pro Harmonic Balancer Repair Sleeves

Fel-Pro harmonic balancer repair sleeves are designed to prevent the leaks associated with your timing cover seal. These handy service accessories are made of steel and will help seal the gaps caused by worn-out harmonic balancer shafts. The sleeves are available for thousands of vehicle and engine family applications.

4.89 out of 5 stars ( 35 )

$12.99

Continental OE Technology Series V-belts

When oil, heat, and abrasion combine to weaken most standard accessory belts, Continental OE Technology Series V-belts will still be going strong. Continental V-belts have inherited tough construction characteristics: EPDM rubber compounds, high-strength Vytacord tension members, fiber reinforced helical cogs, and high-traction rubber edges. These features provide higher heat and abrasion resistance, no-slip contact with pulley grooves, a great fit, and improved flexibility—to deliver consistent, efficient performance, mile after mile. Belts wear and need replaced; get more for your buck with longer-lasting Continental OE Technology Series V-belts, available for a wide range of vehicle-specific applications.

4.6 out of 5 stars ( 52 )

$18.99

K&N Select Oil Filters

K&N Select Oil Filters have been specially designed for professional installers and service providers. Their high-flow design can help to improve engine performance by reducing oil filter restriction. The filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Select Oil Filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional, and blended motor oils. The pleated media provides high capacity, making them suitable for extended oil change intervals (when used in accordance with the vehicle and motor oil manufacturers' recommendation). K&N Select Oil Filters are available for canister and cartridge type oil filter applications. They're offered in a variety of heights, outside diameters, and thread sizes. Some models include a filter bypass relief valve and/or anti-drainback valve.

4.0 out of 5 stars ( 1 )

$11.99

Sealed Power CP-Series Rod Bearings

Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.

4.6 out of 5 stars ( 122 )

$12.99

ACDelco V-Ribbed Accessory Belts

ACDelco V-ribbed accessory belts are excellent OE-style replacements. These belts use top-quality materials chosen to ensure outstanding resistance to heat and oil—as well as the superior performance that drivers demand. Each ACDelco V-belt is built to provide unparalleled strength and reliability. Choose the size that matches the specs for your car, truck, or van, then notice the improvement in torque just by installing a new V-belt!

4.92 out of 5 stars ( 13 )

$16.99

Hastings Premium Ductile Ring Sets

Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.

4.43 out of 5 stars ( 171 )

$19.99

Hastings Piston Ring Sets

Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.

4.43 out of 5 stars ( 140 )

$16.99

Kanter Rod Bearings

Kanter rod bearings are precision-made for classic cars to support the crankshaft, reduce friction between the rod and crank, and allow the piston's linear motion to become the crankshaft's rotation. These components are crucial for converting piston movement into crankshaft rotation, fitting into the connecting rod's "big end" with a cap, and relying on engine oil for a protective film. Kanter rod bearings come as two semi-circular halves (shells) that fit into the connecting rod and its cap. They are available in standard sizes, as well as undersizes to match worn crankshaft journals, ensuring smooth rotation and proper lubrication for vintage engines.

Not Yet Reviewed

$14.99

Kanter Valve Lifters

Kanter Auto focuses on precision-engineered valve lifter replacements, both hydraulic and solid, for vintage and classic cars, ensuring correct fitment and performance for older engines. As crucial components in an engine's valve train, the valve lifters purpose is to transfer motion from the camshaft lobe to the pushrods or rocker arms, ensuring valves open and close at the right time, with hydraulic types automatically adjusting for slack, while solid lifters offer performance but need manual adjustments. Restore proper engine function and performance for your classic vehicle with Kanter valve lifters.

5.0 out of 5 stars ( 1 )

$18.99

  • 1
  • Page 1 of 1