Availability
Clearance
U.S. Wheel's 97 series wheels are steel wheels based on the modular design. These wheels feature 10 round holes with a simulated bolt-in center for a 2-piece look. A high-luster chrome finish gives them that show-quality look. They're available in both standard and reverse offset models to fit nearly any combination. Reverse offset wheels have less backspacing and more dish, which may interfere with some brake and wheel opening configurations. Center caps are sold separately.
( 62 )
$192.99
$116.50
Clearance
Wise Guys Seats' split-bench seat frame and foam with individual center fold-down arm rest is purposely designed to fit into your vintage vehicle. The assembly features split, center fold-out arm rests, four recliner release points, and no-sag springs. These seat frames are powdercoated for durability, and they include Flexalator spring system backs. You'll enjoy a retro look, modern amenities, and comfort in the right spot! Additional details: * Two 12 V power receptacles * 16-gauge steel construction * Multiple density foam types
Not Yet Reviewed
$1,400.99
$1,022.50
Clearance
Metro Moulded window channels are available to fit a range of classic vehicles, including Chrysler, Desoto, Dodge, Hudson, Lincoln, Mercury, Nash, Packard, Plymouth, and Studebaker. These flexible, stainless-steel bead, polypropylene-lined, and rubber covered glass-run channels ensure a precise fit and function, making them the perfect choice for your automotive restoration.
Not Yet Reviewed
$162.99
$150.50
Clearance
Mahle Original offers a variety of high-quality valve lifters for fitment on vehicle and engine applications spanning several decades. These direct replacements will restore factory-type performance in opening cylinder valves.
Not Yet Reviewed
$23.99
$10.50
Clearance
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 58 )
$483.99
$400.50
Clearance
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 371 )
$126.99
$84.50
Clearance
MotoRad has you covered when it comes to your cooling system's sealing needs. MotoRad offers these STAT LOK products in gasket and seal form. The gaskets are designed to reduce installation time and feature an adhesive backing to hold your thermostat securely centered in the counterbore, leaving both of your hands free to align and bolt down the outlet. STAT LOK rubber seals are available for nearly all US and import cars and light trucks. So save time, prevent leaks, and get the job done right with MotoRad STAT LOK engine coolant thermostat gaskets and seals!
( 4 )
$1.99
$1.50
Clearance
ANCO Profile wiper blades provide superior blade-to-windshield contact for an optimal viewing area. They're the affordable beam blade replacements that can also be used for vehicles originally equipped with conventional-style blades. ANCO Profile beam blades offer advanced technology for every vehicle. Order the lengths designed to fit your application. Features: * Low-profile connection system * Symmetrical spoiler allows for easy installation on vehicles with opposing wiper arm systems * KwikConnect provides fast and easy wiper blade replacement * Installed connector covers 9x3 or 9x4 hooks, as well as 3/16 in. and 1/4 in. side pins * Additional connector covers pinch tab, 22mm bayonet, 22mm side pin, and pinch tab push buttons
( 2 )
$9.99
$5.50
Clearance
Raybestos wheel cylinder repair kits include the parts that you need to bring your vehicle's wheel cylinders back up to the original equipment specifications. These repair kits are designed and tested to meet factory standards for durability and reliability under extreme conditions; and since they're from Raybestos, you know they'll fit and perform perfectly. Kits are available for virtually any vehicle on the road today; order the model recommended for your application.
( 4 )
$8.99
$3.50
Clearance
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$194.99
$103.50
Clearance
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$91.99
$53.50
Clearance
National Bearing axle bearings are premium bearings designed to meet or exceed OE specifications. These bearings are constructed from top-quality materials and are an ideal replacement option for your vehicle.
( 4 )
$13.99
$8.50
Clearance
3030 Autosport Drag Ops Series Legend Jet Black satin/polished drag racing rear wheels are forged from 6061 T-6 aluminum which has amazing strength-to-weight characteristics, making it the ultimate material for performance wheels. Drag Ops Street and Strip drag wheels are welded 2-piece construction with precision spun outer rim sections featuring excellent runout, lightweight, and the stability to stand up to the street. The center multi-spoke sections are forged, CNC-machined, and powdercoated for low maintenance. The outer rims are beautifully polished. Each center and rim are mated together, and then 360-degree robotically welded on the backside. 3030 Autosport employs an OE-level pretreat process to properly prep each wheel before powdercoating. The process features a zirconium surface conversion and sealant all based in a reverse osmosis water system for a pure and solid adhesion that will last for years under proper care. All powdercoating is UV-resistant polyester, extremely durable, and easily cleaned. Choose your preferred size, lug pattern, and backspacing. Additional features and notes: * SFI 15.1 tested and certified * Forged center and rim sections * Super lightweight * Accepts 5/8 in. race studs * Extremely true--low lateral and radial runout * Street-rated rim sections handle your drive to the track or event * 5/8 in. caliper clearance
( 1 )
$514.99
$367.50
Summit Bucks
Clearance
ACDelco Gold (Professional) distributor rotors are available for hundreds of applications, including many American Motors, Buick, Cadillac, Checker, Chevrolet, GMC, International, Jeep, Oldsmobile, and Pontiac cars, trucks, and vans from the 1960s and '70s. These are premium replacement parts for ignition systems—a high-quality alternative to OE parts, backed by General Motors. Rotors are located inside the distributor cap, on the end of the distributor shaft, and are responsible for distributing the electrical spark to the correct cylinder at the right time. They are manufactured to meet expectations for fit and performance.
Not Yet Reviewed
$7.99
$5.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
