Availability
DC Sports axle-back exhaust systems are made from high-quality, brushed, mandrel-bent T-304 stainless steel piping. Each axle-back exhaust is matched with DC Sports race-inspired muffler and tip to give you the look and sound that is sure to turn heads. All DC Sports exhaust systems are made to bolt directly to all your OEM equipment with absolutely no necessary modifications—so installation is quick and easy! Additional attributes: * Constructed from 100 percent mandrel-bent T-304 stainless steel * Fully TIG-welded * Offers a direct bolt-on fitment * Available in polished and burnt finishes * Will not fit base models
Not Yet Reviewed
$332.49
Summit Bucks
Specifically created for Californians, Walker CalCat universal fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters feature a universal, weld-in design at a great cost savings over expensive OEM converters and feature a stainless steel body, heat-shielded pipe, and structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat universal catalytic converters. Order the model designed for your application needs.
( 42 )
$250.99
—
$522.99
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 186 )
$281.00
—
$469.00
Dorman direct-fit catalytic converters will help you get your car running in original form again. Over time, a catalytic converter can become clogged with carbon buildup and prevent your car from peak performance; it can even cause serious damage and emissions test failure. Dorman replacements are direct bolt-ins and are designed to be identical to your original converter, ensuring an easy installation. Order the model designed for fitment on your make/model vehicle.
( 2 )
$436.99
Dorman direct-fit manifold catalytic converters bring several parts together in one package for a turnkey installation. These top-quality exhaust manifolds are joined to the cat, and most models include gaskets and downpipe hardware, as well. Constructed from cast iron or stainless steel tubing, the units resist warping, cracking and leaks—and all undergo thorough inspection to ensure quality performance. Dorman direct-fit replacements deliver ease and convenience to your exhaust system upgrade. The kits are available for hundreds of makes and models.
( 20 )
$338.89
BRExhaust exhaust pipes are designed for easy bolt-on installation. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. Each direct-fit aluminized steel pipe is engineered to meet OE specs, ensuring performance, reliability, and a precise factory-like fit. Whether you need a front pipe, intermediate pipe, or downpipe, BRExhaust carries a wide range of replacement exhaust components to service countless applications.
( 8 )
$262.99
Summit Bucks
Clearance
Walker Ultra Direct-Fit catalytic converters fit like OE, because the company makes original equipment! Besides the perfect fit, inside the Ultra catalytic converters are ceramic substrates with high-tech washcoat and the right loading of precious metals. The outside bodies are stainless steel for long life and durability. Catalytic converters are a vital part of your vehicle's emission control system; choose the fit, quality, and performance of a Walker Ultra catalytic converter. Order the replacement model designed for your vehicle application.
( 387 )
$466.99
$320.99
—
$466.99
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 31 )
$337.99
—
$479.99
Catco prides itself on leading the industry in new product development and efficient manufacturing processes for its EPA- and CARB-compliant catalytic converters. Aristo's proprietary substrate chemistry yields highly efficient loadings for lower cost and better converter efficiency while Catco's latest advanced-manufacturing technology ensures that all converters are built to exact OE dimensions and fitment. All this allows Catco to maintain industry-leading efficiency, productivity, and competitive pricing. Catco Federal/EPA direct-fit catalytic converters feature: * 409 stainless steel shell and neck construction for longer life * Aristo Clean by Design advanced catalyst technology to handle the toughest emissions problems * Increased precious metals loadings * Improved O2 storage and release * Exact O2 sensor location(s) * Lower emissions output * Long-term reliability * Keeps the MIL light off * Hardware included (where needed) * Provides for faster and easier installations * 5-year/50,000-mile warranty on converter body * 25,000-mile warranty on emissions
( 7 )
$342.99
—
$531.99
ATP exhaust manifolds are high-quality replacements developed from the OE specs to ensure they'll install and perform like the originals. These manifolds are manufactured from premium metals, like cast iron and stainless steel. All models are machined to ensure that the flanges are flat, mount evenly, and do not leak. Hundreds of models are available for fitment on countless vehicle and engine applications. ATP exhaust manifolds are backed by a limited lifetime warranty.
( 102 )
$386.99
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 245 )
$554.99
Since you have to use a catalytic converter anyhow, you might as well use one that will last a long time and maintain your vehicle's performance level in the process. Catco direct-fit catalytic converters feature 409 stainless steel shells, 16-gauge stainless steel pipes and nipples, and a heat-resistant sealed mat—all of which help them to last longer. These Catco units are direct replacements for OE converters and will install with little or no modification. Some converters have steel air tubes with perforated holes to help distribute the airflow evenly, without robbing power. New flanges are included when necessary. Order the model designed for your vehicle application.
( 53 )
$498.99
On Sale
Performance is most important, but looks ... well, they're important, too. XForce exhaust systems are uniquely engineered and designed to deliver both desires, plus great audio notes. These direct-fit components are fabricated from 304 stainless steel and offer unrestricted flow to fit your ride with increased power, bolder sound, and fabulous looks. You'll have what you want for your car or truck with an easy, bolt-on upgrade XForce exhaust system. Order the size, style, and configuration recommended for your application.
( 66 )
$805.50
$550.00
BRExhaust direct-fit muffler assemblies are constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. Built from 16-gauge steel tubing and fully aluminized, each assembly is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Available in different configurations compatible with import or domestic vehicles, choose the one designed for your vehicle.
( 2 )
$376.00
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 423 )
$354.00
—
$548.00
Injen Technology's Super SES exhaust systems are dyno-tuned to complement their performance intake systems. In doing so, the Super SES systems provide maximum horsepower and torque across the power band. The Super SES exhaust systems are manufactured from 100 percent 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing, CNC-machined flanges, and robotic TIG welding. They also feature a straight-through muffler and Injen's unique flared tip design.
( 3 )
$564.91
Summit Bucks
Specifically formulated for Californians, Walker CalCat direct-fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters have an OE-style and fit for ease of installation. The CalCats feature a stainless steel body, a heat-shielded pipe, and a structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat direct-fit catalytic converters, available for a wide range of vehicle applications.
( 23 )
$292.99
—
$430.99
AP Exhaust universal catalytic converters will work to make your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering comprehensive coverage, AP Exhaust can provide universal catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust universal catalytic converters offer the quality, fit, and value to meet those concerns.
( 6 )
$577.99
If you are looking to crank it up a notch, AWE Tuning made it easy with the Touring-to-Track Edition conversion kits in the event you want to increase the aggression inside of the cabin. The Track Edition conversions feature straight-through Track Edition rear sections and comes with new hardware. Simply unbolt the existing Touring Edition rear sections and replace with the new Track Edition rear sections. Existing tips are to be reused. So, choose the Touring-to-Track version that fits your vehicle. Features and benefits: * Handcrafted from CNC mandrel-bent, U.S.-sourced stainless steel * Direct bolt-on for factory-like simplicity * Perfect fitment, guaranteed * Features the AWE No Check Engine Light guarantee * Lifetime warranty (1-year on tip finish)
Not Yet Reviewed
$305.00
When it's time for a new muffler you can shop for something that might fit, or go with a company that uses 3-D modeling programs for a great fit. AP Exhaust OE replacement mufflers include their Challenge Series and Welded Muffler Assemblies—and are direct-fit, requiring no installation modifications. They feature welded necks for enhanced longevity, minimum back-pressure, and maximum sound control for OE performance. AP's patented single cartridge muffler design is used extensively, and all required brackets are welded to the muffler body for long-lasting strength. AP Exhaust OE replacement mufflers offer a premium direct-fit to quickly get you back on the road. Nearly a thousand models are available; order the size options and configuration recommended for your exhaust setup. Features and benefits include: * Top-quality, heavy-duty construction * Premium-designed to fit and perform like OE welded assemblies * Original equipment appearance and performance * Import and domestic applications * Aluminized components for longer life * Engineered to provide a quiet ride * Easy and quick bolt-on/clamp installation
( 70 )
$283.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
