Availability
Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.
( 101 )
$2,217.04
Wilwood Forged Narrow Superlite 4R Big Brake rear brake kits are the engineered match for the AERO6R/ST front race kits on vehicles intended for unrestricted road race competition. All emphasis is on matched front to rear balance, high durability, and high-efficiency heat management, without adding unnecessary rotating or unsprung weight to the driveline and rear suspension. Wilwood Forged Narrow Superlite 4R Big Brake rear brake kits are championship-proven systems. Features and benefits: * FNSL4R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish that provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout * Thermlock pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life by decreasing temperatures in the caliper body, fluid, and seals * Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish * Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls * Calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. * Spec 37 alloy GT Series directional vane 13 in. rotors are dynamically mounted using Wilwood Dynamic Lug Mounting system to forged aluminum hats * Hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces * Mounting brackets include all premium grade fasteners and secure the calipers to the uprights in the stock location with no modifications required * High-temperature, high-friction, race compound pads selected specifically by application
Not Yet Reviewed
$2,213.46
Wilwood Forged Narrow Superlite 4R Big Brake Rear Race Kits are configured for dedicated road racing on all 2001-2006 BMW E46 M3 models. They are the engineered match for the AERO6R/ST front race kits. All emphasis is on improved front to rear balance, high durability, and high efficiency heat management, without adding unnecessary rotating or unsprung weight to the driveline and rear suspension. The FNSL4R/ST calipers used in these kits feature a forged aluminum body with a Type III Mil-Spec, medium gray color, hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. Thermlock pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT competition series 12.88 in. diameter directional vane rotors are dynamically mounted to the OE hubs with weight-saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Further weight reduction is achieved by accommodating the elimination of the parking brake hardware. Mounting brackets, including all premium-grade fasteners, secure the calipers to the uprights in the stock location—with minor modifications to the dust shield, as illustrated in the photos on page 4 of the assembly instructions. These championship-proven systems are completed with high temperature, high friction, endurance compound race pads selected specifically by application. Stainless steel braided flexlines are included in the kit to complete the installation.
Not Yet Reviewed
$2,213.46
MagnaFlow NEO Series Performance exhaust systems are available for fitment on a wide range of vehicles, including many Honda©, Acura©, Ford, Volkswagen, and Toyota models. The systems are engineered to enhance the sound and performance of your engine with improved airflow and a fresh take on MagnaFlow's signature exhaust sound. Improved exhaust flow is made possible thanks to the system's 2.5 in. mandrel-bent main tubing with No-Drone Technology resonators. NEO Series systems are easy to install with a direct-fit bolt-on design that replaces all major exhaust components from near the catalytic converter on back. Parts are made entirely of durable, corrosion-resistant stainless steel (except carbon fiber tips). The cat-back systems are available in a variety of inlet/outlet, muffler quantity, and tip options. * EXHAUST UNLEASHED: Aggressive and unleashed in all the right ways. The NEO Series represents an evolution in MagnaFlow's exhaust sound that has been re-engineered and enhanced to match the advanced technology of today's performance vehicles. * PURE PERFORMANCE: Sound is nothing without power. Every NEO Series exhaust system is designed for maximum airflow and validated on the factory in-house dyno to ensure performance across the entire powerband. * ENGINEERED EXCELLENCE: Robust stainless-steel construction, advanced 3-D scanning and CNC precision robotic manufacturing ensure your exhaust is engineered to last. * DRONE-FREE DRIVING: MagnaFlow's No Drone Technology utilizes quarter-wave passive noise cancellation to eliminate unwanted droning frequencies for improved interior comfort and sound.
( 1 )
$2,171.00
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$2,384.96
Bilstein B16 suspension kits can equip your vehicle with a race-inspired system that delivers unsurpassed driving performance and high performance tuning. Kits reveal monotube gas shocks with manually adjustable 9 or 10-stage precision compression and rebound settings to take your vehicle from comfort mode to competition-ready with the turn of a dial. Their threaded bodies permit the accurate adjustability of the front and rear progressive rate springs to achieve the vehicle ride height, center of gravity, and the level of handling you desire. Whether you're cruising or competing, Bilstein B16 suspension kits put performance control in your hands. Features and benefits: * Threaded body adjustable range of 20mm at both axles * Lowering of approximately 30-50mm at front and rear * Road-tested and fine-tuned by Bilstein ride engineers--under extreme motorsports conditions * Spring plates and locknuts made from a special aluminum alloy * Triple-C-Technology surface coating--long-lasting corrosion resistance * Round threads for easy adjustment * Quality sport springs made from highly durable material * Gas pressure technology * Bilstein monotube technology--made in Germany
( 3 )
$2,409.00
Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub. Nearly 700 models are available for specific vehicle, bolt pattern, and axle applications.
( 8 )
$2,494.95
Lowering and fine-tuning a vehicle system to suit your needs means using KW Variant 2 coilover kits to do it right. These coilover systems employ the highest quality materials for long life—and enable you to adjust vehicle height and rebound damping according to your specifications. Variant 2 coilover kits include shorter stainless steel strut housings, high-quality yellow springs, purple anodized aluminum spring collars, and elastomer bump stops with an integrated dust protection system. Over a hundred models are available, for fitment on vehicles from 1948 and up.
Not Yet Reviewed
$2,334.00
—
$2,454.00
ST Suspensions XTA Plus 3 coilover kits give your car maximum performance for the road and the tools you need for any challenge. From the factory, these kits are equipped with KW dampers that are adjustable in high- and low-speed compression, as well as adjustable rebound damping. With 24 clicks of adjustment for each, high-speed and low-speed compression damping and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn't matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads—XTA Plus 3 coilovers have what it takes to keep your car dialed! Of course, the XTA Plus 3 also includes a parts approval certificate, race springs, and aluminum unibal top mounts. Order the model recommended for your vehicle. * Easy lowering adjustment: Like all ST coilovers, the lowering adjustment is made via a continuous thread on the galvanized strut. This allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower. NOTE: The lowering of each vehicle differs greatly with ST XTA Plus 3 coilovers due to the type of construction. * KW Engineering, exclusive for ST suspension: The high-quality ST XTA Plus 3 coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper, as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions. Features: * Latest damping technology for maximum longevity * Reduced system friction for effective damping adjustment * Individual lowering within the tested adjustment range * Front and rear axle (when possible) with thread adjustment * Galvanized coilover struts with additional coating for an optimized corrosion protection * Complete solution with adjustable spring plate, race spring system and bumpers with dust protection * Aluminum adjustable uniball top mounts (when possible) * Scaled camber adjustment (optionally also caster), when possible * 3-way adjustable dampers: - 18 clicks low speed rebound damping - 24 clicks low speed compression damping - 24 clicks high speed compression damping
Not Yet Reviewed
$2,799.00
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$3,768.99
—
$5,153.99
Delphi fuel injection pumps feed your gas or diesel engine. Precisely delivered fuel keeps your engine running smoothly and provides the right amount of fuel to gain power. These Delphi pumps are built from quality materials and are validated by Delphi to ensure the best performance in your rig. Give your cylinders equal shots of fuel for better performance with Delphi fuel injection pumps.
Not Yet Reviewed
$2,466.99
Variant 3 coilover kits from KW Suspensions feature state-of-the-art technology to customize your ride's stance and look sharp. These coilover systems are designed with shorter INOX-Line stainless steel strut housings for more spring travel, anodized aluminum spring collars for durability, and high-tensile racing springs for strong support and comfort. Their separate and independent compression and rebound damping options allow for a truly individual driving setup. Order the kit recommended for your vehicle.
Not Yet Reviewed
$3,094.00
StopTech Big Brake kits offer superior street performance with a supercar look and feel. They increase heat capacity and reduce compliance without messing up your vehicle's stock front-to-rear brake torque ratio. In other words, StopTech Big Brake kits provide larger rotors to brake harder with a reduced chance of fade, plus stiffer caliper and stainless steel lines for consistent pedal feel and responsiveness, plus optimized brake bias to utilize all the traction available from all four of your tires. What's stopping your supercar? It should be the Balanced Brake Upgrade design of StopTech Big Brake kits for maximum stopping performance and driver-controlled braking. Features and contents: * Forged calipers with patented stiffening bridges * Patented 2-piece AeroRotors for optimized cooling * Braided stainless steel brake lines * Performance brake pads * Mounting brackets * All necessary hardware to complete the installation
( 1 )
$2,698.20
—
$3,418.92
StopTech Trophy big brake kits are the ultimate to obtain track or street performance. Offering Trophy Race and Trophy Sport kits, StopTech uses the same lightweight, fully forged STR calipers and 2-piece AeroRotors for both, but with different components added. StopTech Race kits include braided stainless steel lines, mounting brackets, and MAX Float hardware that allows for the greatest amount of float between the hat and rotor. Their Sport kits are for street-driven vehicles and add silicone boots to extend service intervals, anti-rattle rotor mounting hardware for quieter street operation, and Sport brake pads.
Not Yet Reviewed
$3,599.10
Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits are the perfect addition to front Big Brake upgrades for incredible stopping power. These disc brake kits feature FNSL4R 4-piston oversize forged billet aluminum calipers, 13 or 14 in. 2-piece premium rotors, and high performance BP-10 compound pads. Also included is a high-quality, drum-style parking brake assembly. The neatly hidden internal shoe system provides a clean installation, with superior static holding power for parking. Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits provide the extra power to reel in your beast. Order the kit designed for your vehicle application.
( 28 )
$2,213.46
These Sikky Manufacturing engine swap kits will help complete the exchange. We offer a large range of kits with the components that will make your build a success. Most kits, but not all, may include 304 stainless steel headers, mount mounts, crossmember, aluminum oil pan and pickup, gaskets, and hardware. Choose the kit packaged for your vehicle.
Not Yet Reviewed
$3,790.10
—
$4,300.10
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty
( 3 )
$2,311.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
