Availability
Showing In Stock Items. Show All 153 Items.
ZZPerformance offers high-output intercooler pumps for a variety of vehicles, including many Chevrolet and Saturn cars from the early 2000s and up. Based on the popular Bosch design, the ZZP pumps are a direct replacement/upgrade to your existing Bosch pump. They will work in any application the Bosch does—and offer improved flow over the Bosch. These intercooler pumps use the same EV1 power connector. * Specs for Model ZZ-ICP-S1: --- Flow: 35 liters per minute at 12 V / 50 watts --- Max draw: 85 watts at 14.4 V – 38 lpm --- Max continuous volts: 14.4 V --- Max fluid temperature: 190 degrees F --- 3/4 in. inlet and outlet
Not Yet Reviewed
$129.99
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 370 )
$57.99
Dorman fuel pump drivers are designed to control the fuel flow on an electronic injection fuel pump. They feature two transistors mounted on their backsides that generate heat that has to be dissipated, ultimately eliminating common heat soak problems. Save yourself from your vehicle shutting down while driving with Dorman fuel pump drivers.
( 11 )
$177.99
Summit Bucks
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$5.99
Summit Racing™ fuel tank caps are designed to keep fuel in place. Each style is made of top-grade material and they are offered in various fuel tank cap styles to suit your vehicle's application needs.
( 25 )
$5.99
ACDelco fuel rail O-ring kits are professional, premium aftermarket replacement parts. They're manufactured to meet expectations for fit, form, and function, providing the performance and dependability you expect from ACDelco.
( 9 )
$13.99
ACDelco GM Genuine Parts vapor canister purge valves are GM-recommended replacements for your vehicle's original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment parts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Order the model designed for your vehicle to restore reliable, safe operation.
( 3 )
$24.99
—
$42.99
Deter fuel theft and vandalism with some help from MotoRad Products. These MotoRad locking gas caps offer OEM-quality construction and materials and a famous maker lock cylinder with two keys. MotoRad locking gas caps are available in push-on, threaded, and quick-on styles, depending on your application.
( 9 )
$11.99
—
$12.99
Replace your worn, cracked, or damaged fuel injector O-rings with Standard Motor Products. Your vehicle's fuel injectors operate under extreme pressures and are fitted with several O-rings to prevent leakage of fuel into hot engine compartments. The operating conditions are tough on sealing materials, and O-rings must be capable of sealing from as low as -40 degrees C to as high as +150 degrees C and be highly resistant to aggressive automotive fuels. The consequence of O-ring failure could be catastrophic, so trust your engine to Standard Motor Products O-rings.
( 34 )
$3.99
—
$7.99
On Sale
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 308 )
$68.99
$55.19
ACDelco offers fuel injector retaining clips in a variety of styles. These factory-style replacements are designed for many vehicles from the 1980s and up. Machined to correct original specs, the metal clips secure the injectors to the fuel rail of your GM vehicle. They're available individually or in larger set quantities.
( 4 )
$10.99
—
$12.99
Summit Racing™ tethered fuel tank caps give you the OEM quality and fit without the price. These caps fit applications originally equipped with a tether and come preassembled for easy installation. They're made from durable materials for longevity and are available in multiple colors. Order the replacement fuel cap recommended for your vehicle.
( 10 )
$9.99
—
$14.99
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 6 )
$118.78
ACDelco fuel tank lock rings are GM-recommended replacements for your vehicle. These rings are of the same high quality to deliver the right fit and function, just like your originals. Secure your fuel tank sending unit with lock rings from ACDelco.
( 6 )
$9.99
MotoRad has you covered if you lose or damage your fuel cap. These OE replacement-type fuel caps are a direct fit for your application. They will ensure that you get a proper seal to prevent any fuel loss or evaporation.
( 24 )
$5.99
—
$6.99
Dorman fuel vapor canister purge valves serve as part of the emission control system and measure the flow and amount of fuel vapor that are recycled into the combustion process via the charcoal canister, or fuel vapor storage device. Available for a range of applications and manufactured from premium materials for a long service life, these fuel vapor canister purge valves are engineered for a perfect fit and are a direct replacement for the original equipment purge valve. Order the model for your application needs.
( 21 )
$34.99
—
$53.99
These K&N inline performance fuel filters are designed for use in a variety of racing circuits, like NASCAR, drag racing, Sprint Car, marine applications, and all other types of custom racing. They will provide high flow rates, while protecting your engine from harmful contamination. The filters are compatible with methanol, are pressure rated up to 205 psi, and can achieve a high flow rate up to 18 gpm. The filter element is manufactured from stainless steel and features a black anodized aluminum housing with Viton® rubber seals.
( 35 )
$16.99
UREMCO fuel injector O-rings enable you to avoid leaks when replacing or servicing your fuel injectors. They're made from quality materials to resist high temperatures and chemical exposure for reliable, optimum performance. The O-rings are available for a variety of applications. The direct replacements meet or exceed OEM specifications—and are highly recommended whenever fuel injectors are swapped out. Order the model and quantity needed for your vehicle.
( 4 )
$9.99
—
$24.99
MotoRad keyed alike locking fuel caps are manufactured from durable, long-life materials to protect your fuel from theft and vandalism. They are independently tested for emission control and pass all state and federal emissions tests to reduce air pollution with proper sealing and venting. Stop theft with MotoRad keyed alike locking fuel caps.
Not Yet Reviewed
$9.99
ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 39 )
$150.99
—
$240.99
Standard Motor fuel pressure regulators ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Defective fuel pressure regulators most often develop excessive pressures that create an overly rich air/fuel mixture, robbing mileage and performance. Similarly, if the pressure regulator diaphragm leaks through its vacuum hose into the engine intake manifold, the fuel mixture will also become extremely rich. Don't take chances with your fuel supply—rely on Standard Motor Products for your vehicle's fuel system needs. Order the replacement regulator designed for your application.
( 47 )
$148.99
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 251 )
$72.99
—
$447.99
ACDelco Gold fuel injector seal kits contain premium aftermarket replacement components for the engine fuel management system. These parts are manufactured to meet or exceed your expectations for fit, form, and function. Gold fuel injector seal kits provide the performance and dependability you expect from ACDelco. They're available for thousands of vehicles from the 1980s and up.
Not Yet Reviewed
$4.99
—
$11.99
Operated by the engine control module (ECM) in your vehicle, ACDelco vapor canister vent solenoids signal the valves to open or close. This action allows the engine to burn fuel vapors captured in the charcoal canisters and prevents them from escaping into the atmosphere. For the quality, reliability, and durability of original equipment—all manufactured to factory specifications for fit, form, and function—order the recommended ACDelco vent valve solenoids designed to fit your vehicle!
( 18 )
$20.99
—
$34.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
