SAAB Ignition Components Ignitions & Electrical

Dragon Fire Performance Ignition Coils

Dragon Fire offers Performance ignition coils for a wide range of cars and trucks—including Chevrolet, GMC, Buick, Cadillac, Hummer, Isuzu, Pontiac, and Saab models from the early 2000s and up. These replacements are engineered to provide reliable spark energy and complete combustion. Their watertight, weatherproof connectors are designed using advance thermoresistant plastic to resist fracture and cracking from radiant heat and thermal cycling. The coils are tested to meet or exceed OE output voltage. High-temp epoxy filled construction prevents voltage leaks and RFI interference. Each unit also includes performance-grade primary and secondary bobbins with premium copper windings to ensure peak performance under load and extended service life. Order the coil packs recommended for your vehicle. FEATURES AND SPECS: * Direct OEM replacement * High-energy output * High-RPM Rated for NA or boosted applications * Brass high-tension terminals * Manufactured in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure long service life and perfect fitment

4.58 out of 5 stars ( 19 )

$229.95

—

$249.95

ACDelco Coil and Ignition Wiring Harnesses

ACDelco coil and ignition wiring harnesses will spark renewed energy for your engine. Wiring harnesses can deteriorate over time, leaving them unable to deliver the necessary voltage for power. Replace worn wiring with ACDelco coil and ignition wiring harnesses and keep the spark alive!

4.95 out of 5 stars ( 20 )

$110.99

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.64 out of 5 stars ( 1010 )

$117.30

—

$242.66

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.34 out of 5 stars ( 295 )

$185.58

On Sale

MSD Pro Power Coils

When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.

4.39 out of 5 stars ( 41 )

$188.95

$170.05

PerTronix Ignitor III® Solid-State Ignition Systems

These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.

4.52 out of 5 stars ( 85 )

$159.10

On Sale

MSD Blaster OEM Replacement Coils

When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.

4.72 out of 5 stars ( 633 )

$126.95

On Sale

Mishimoto Ignition Coils

The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.

Not Yet Reviewed

$137.95

Standard Motor Ignition Coils

Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.

4.43 out of 5 stars ( 83 )

$120.99

—

$243.99

Clearance

ACDelco GM Genuine Parts Ignition Control Modules

ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.

5.0 out of 5 stars ( 2 )

$132.99

$107.50

Standard Motor Ignition Modules

Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.

4.0 out of 5 stars ( 39 )

$133.99

—

$154.99

Summit Bucks

Delphi Ignition Coils

Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.

4.66 out of 5 stars ( 83 )

$103.99

Spectra Premium Ignition Coils

From raw materials to the final product assembly, each Spectra Premium ignition coil goes through rigorous test requirements to ensure they meet or exceed OE specifications for fit, form, function, and proper installation. Order the model designed for your vehicle and engine application. Features and benefits of all Spectra Premium ignition coils: * Each unit is durability tested at 100 cycles of thermal shock (-50 to 300 degrees F) to ensure reliability against extreme vibration * Each coil is road tested to ensure real world performance and to verify that each design meets Spectra's quality standards * 100 percent copper in both primary and secondary windings * Windings insulated by high-voltage enamel coating

5.0 out of 5 stars ( 1 )

$105.99

—

$159.99

Standard Motor T-Series Ignition Coils

Standard Motor T-Series ignition coils are offered in a variety of styles to cover a wide range of vehicle applications. Each coil model is designed to exceed OEM specifications for accurate, maintenance-free operation. High-efficiency laminations optimize magnetic field build-up to produce high spark energy and reliable performance. Standard Motor T-Series DIS ignition coil terminals are steel or aluminum, as indicated by the original equipment. Select the Standard Motor coil ignition designed for your application needs.

4.56 out of 5 stars ( 16 )

$196.99

—

$210.99

Clearance

Beck/Arnley Ignition Coils

Beck/Arnley ignition coils are high-quality replacements, available in styles such as coil pack, E-core, canister, and C-core. These OE-type direct-fit coils will deliver the spark your engine needs to run efficiently. Order the model designed for your vehicle application.

3.67 out of 5 stars ( 9 )

$102.99