Availability
Showing In Stock Items. Show All 419 Items.
Arnott coil spring conversion kits are expertly designed to replace a vehicle's failing air suspension components with traditional steel springs. All of Arnott's coil springs are constructed from U.S. steel and are designed and tested to provide a great ride along with many years of trouble-free driving. If you have an older vehicle or you're dealing with a multitude of air system issues—order the Arnott coil spring conversion kit designed for your make and model. Items, features, and notes: * Custom valved shock absorbers * Powdercoated coil springs * Most kits available with electronic bypass module (EBM) that eliminates fault codes * Pre-assembled for safe and easy installation * OE fit with no necessary modifications * Not recommended for customers who tow larger trailers or often carry large loads (may cause improper angles for headlight beams)
( 24 )
$1,059.51
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
( 28 )
$968.00
—
$998.00
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle.<br><br>PowerStop Z36 Truck and Tow brake upgrade kits are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. They come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. The low-dust Z36 Extreme ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Evolution drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, you'll get an easy and affordable, bolt-on performance upgrade with PowerStop's Z36 Truck and Tow brake upgrade kits.<br><br><strong>Features and Benefits</strong><p><ul><li>This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks</li><li>Proprietary <strong>Carbon-Fiber Ceramic Z36 brake pads</strong> enhance the strength of a typical ceramic brake pad compound to handle heavier loads</li><li><strong>Stainless-steel pad shims</strong> resist the increased temperatures common on heavy duty applications</li><li><strong>Low-dust braking</strong> validated through on-vehicle 3rd party tests in Los Angeles, showing on average <strong>30% less dust versus OE</strong></li><li><strong>Drilled & Slotted performance rotors</strong> provide maximum cooling</li><li><strong>Bolt-on upgrade</strong> for stock brakes, no modifications necessary</li><li>Includes <strong>stainless-steel installation hardware</strong> and <strong>high-temperature ceramic brake lubricant</strong></li><li><strong>Brake rotors, pads & hardware</strong> engineered to work together to increase the overall braking power on vehicles with heavier loads</li><li><strong>Rotors are zinc plated</strong> for maximum protection against rust</li><li>Buy with confidence from the <strong>originator & industry leader</strong> of brake kits</li></ul>
( 2749 )
$819.73
—
$1,069.32
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 24 )
$995.00
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,079.95
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 52 )
$799.91
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 929 )
$983.99
—
$1,106.99
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
( 20 )
$1,075.00
Manufacturer Rebate
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 513 )
$769.27
—
$1,036.55
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 156 )
$889.95
—
$949.95
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$799.00
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$999.95
Installing a Titanium Signature Series fuel system has never been easier, or more affordable. Designed to simplify installation, FASS's No-Drop Series diesel fuel system kits include their fuel sump, which prevents the need for removing your fuel tank. Better still, these No-Drop kits offer significant savings over buying a Titanium Signature Series fuel system and sump kit separately! They include everything you need for a simple, straightforward FASS installation--and nothing you don't. Select the kit designed for your diesel truck. No-Drop kit benefits: * Increases fuel lubricity at least 10 percent * Can increase 3 times the life of injection components * Removes over 99 percent of the water from fuel * Eliminates entrained air and vapor * Filters out debris down to 2 microns absolute * Provides far more fuel flow than OEM * Drastically simplifies installation
Not Yet Reviewed
$799.00
On Sale
Flowmaster Signature Series exhaust systems are manufactured from brushed 304 stainless steel for years of trouble-free service and high-end good looks. These premium systems are fitted with Flowmaster's Signature Series mufflers for maximum performance and sound, along with black chrome tips (not on all systems), delivering exhausts that look as good as they sound. They are hand TIG welded for exceptional strength and can be easily installed utilizing factory mounting points. Select the system designed for your vehicle.
( 1 )
$1,219.95
—
$1,225.95
$914.95
—
$919.95
South Bend Clutch Dyna Max organic feramic clutch kits are manufactured with performance organic and feramic friction materials, which provide moderate clutch engagement. The Dyna Max organic clutch feramic kits by South Bend Clutch are durable and reliable. They come with the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. These kits are available for a variety of clutch styles and applications, with or without the flywheels. Select the kit best suited for your application needs.
( 22 )
$870.41
On Sale
Keep your cargo protected from the elements—and thieves! BAK BakFlip G2 tonneau covers combine the convenience of a folding design with hard tonneau security and durability. You can fold the BakFlip G2 back for complete truck bed access or fold it down and lock it in place to protect your valuable cargo. Its aluminum panels won't shrink or stretch during weather changes and are capable of holding up to 300 pounds of evenly distributed weight. Features include: • Sleek, low-profile fit • Aluminum panels resist changes in weather • Treated to resist the harmful effects of UV rays—no cracking or warping • Innovative locking arms secure the cover when its folded against your rear window • Tongue and groove weatherstripping keeps rain and snow out • No-drill installation
( 28 )
$1,049.99
$949.99
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$876.99
—
$898.99
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$769.50
—
$799.95
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$771.99
—
$1,043.95
Bilstein B8 6112 suspension kits are for those seeking serious off-road action to carry them over the terrain. Each of their B8 kits will optimize the off-road capabilities of your rig with a 60mm digressive piston for increased damping control, specially designed cold wound springs, and an adjustable spring seat, which allows for vehicle leveling, larger tires, and increased ground clearance. They are a direct bolt-on for many applications and utilize the OEM top mount and spring isolators. Are you searching for the ultimate solution to your off-road adventures? One of these Bilstein B8 6112 front suspension kits will be the definitive answer.
( 11 )
$885.00
Perfect for long hauls or remote refuels, Dee Zee liquid transfer tanks can raise your hauling capacity significantly. They are available in models with various volumes and features to fit almost any truck bed application. While most of these auxiliary tanks are not rated for gasoline or flammable fluid transport, many can be used for diesel or other non-flammable fluids. Find the right size, capacity, tank material, and finish for your application—and get your truck outfitted with a Dee Zee liquid transfer tank today.
( 1 )
$758.99
—
$1,000.99
Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable
( 331 )
$1,020.08
—
$1,028.95
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$836.00
—
$959.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
