Availability
Showing In Stock Items. Show All 123 Items.
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 344 )
$152.99
—
$212.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$121.99
—
$216.99
Mopar Replacement lifters offer an original equipment fit. That means their fitment and install will be hassle-free. Whether you call them lifters, tappets, or followers, these genuine Mopar replacements will fit the profile of your camshaft lobes to keep your engine running its best.
( 4 )
$114.99
—
$252.99
Mopar Replacement rocker arms offer an original equipment fit. That means their fitment and install will be hassle-free. These genuine OE Mopar parts will help to keep your vehicle's engine running its best. Select the Mopar Replacement rocker arms designed for fitment for your vehicle application.
( 18 )
$161.99
Replace your worn or ticking lifters with premium-quality valve lifters from Crown Automotive. They're available in a variety of hydraulic styles—such as flat tappet, roller, and lash adjuster. Order the model designed for fitment on your specific vehicle.
( 1 )
$139.99
—
$146.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$114.99
—
$115.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$105.99
—
$186.99
Mopar Replacement oil pumps provide the perfect OE fit for your Jeep and Chrysler vehicles. Just like the originals, they provide not only the fit, but also the function to make your install easier. Service your vehicle with Mopar Replacement parts.
( 4 )
$191.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$104.38
—
$112.40
Lokar's flexible and machined engine dipsticks are designed to coordinate with their flexible transmission dipsticks. The slim design allows for an easy installation inside of your headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without tube), depending on your application. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil.
( 347 )
$102.95
—
$157.95
BTR Beehive valve springs, with their conical shape, can deliver enhanced performance. They may also provide lower seat pressures, so your valvetrain components are less stressed. BTR springs are produced from quality materials, and their beehive design will support more RPMs than stock cylindrical springs. Valve springs are the fastest moving components in your engine. Choose BTR Beehive valve springs for better durability, higher RPM potential, and performance. They're available in a variety of size, pressure, and lift options for countless applications from 2001 and up.
( 9 )
$149.99
Cloyes timing chain kits meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and single non-roller. Order the kit designed for fitment on your specific model or engine application.
( 174 )
$103.99
—
$202.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$122.99
—
$123.99
Dorman offers replacement EGR gaskets in a variety of styles, materials, configurations, and kit contents. Exhaust gas recirculation (EGR) is actually an emissions reduction technique used in gasoline and diesel engines. The system works by recirculating a portion of the engine's exhaust gas back into the engine cylinders, diluting the oxygen and providing gases that benefit combustion. The Dorman heat-resistant gaskets seal the EGR valve where it connects to the exhaust system. Order the gasket or kit recommended for your vehicle application.
Not Yet Reviewed
$180.95
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$112.99
—
$208.99
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$131.02
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 324 )
$214.95
The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. Earl's Performance oil filter relocation kits allow the oil filter to be moved to a remote location, making them ideal for engine swaps where extra clearance is needed. Everything needed to move the filter is included: Block-off adapter, adapter fittings, push-on hose, hose ends, and the remote filter adapter. The block-off adapter features aluminum construction with an attractive, corrosion-resistant black anodized finish and screws on in place of the oil filter. The Gen III Hemi block has two 3/8 in. NPT ports located near the filter allow installation of the AN hoses for plumbing the remote filter.
( 1 )
$199.95
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$223.99
King offers SX-Series main engine bearings for a variety of vehicles, including Jeep and RAM. The direct replacements are machined from tri-metal material and are sold in sets. Order the bearings recommended for your application.
( 1 )
$147.99
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 67 )
$294.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 52 )
$100.99
—
$247.99
King SV-Series rod bearings provide movement with minimal power loss. Connecting rod bearings provide rotating motion of the crank pin within the connecting rod, which transmits cycling loads applied to the piston, and King SV-Series will provide this function well to handle your extreme load engines. These King SV-Series connecting rod bearings are copper-based and lead-free, offering great wear resistance, as well as load capacity.
( 3 )
$104.99
Hamilton Cams Cummins Tappets are solid valve lifters and are available for Cummins 24-valve and 12-valve 6-cylinder engines. They are also offered for Cummins 4BT 4-cylinder (8-valve) engines. Cast tappets for 6-cylinder engines feature a 1.450 in. diameter and do not interfere with the fuel pump eccentric on 12-valve engines. Much wider than the 1.100 in. tappets used in early 12-valve engines, their greater surface area makes them perfect replacements. These 24-valve and 12-valve tappets work well with the wider lobes of Hamilton Cams camshafts and promote much better lobe life with today's low zinc oils. For use over 5,000 rpm, with heavy valve springs, or a billet steel cam, Hamilton Cams offers 1.450 in. steel tappets. They are specially designed and manufactured to handle the higher pressures, rpm, and loads of competition use. Hamilton Cams Cummins 4BT tappets have a 1.300 in. diameter; much wider than many 4BT tappets that are only 1.10 in. These cast 1.300 in. tappets allow the pressures between the camshaft and the tappet to be spread over a significantly larger surface area to reduce lobe and lifter wear.
( 1 )
$169.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
