Availability
Showing In Stock Items. Show All 43 Items.
USA Standard Gear spider gear sets offer OEM-quality at a low price. They're available in dozens of configurations for applications from 1955 and up. Depending on the kit you choose, your selection may include all or a combination of side gears, pinion gears, spider gear thrust washers, cross pin shaft, cross pin bolt, and/or roll pin. Restore the performance of your differential with the quality of a USA Standard spider gear set.
( 16 )
$199.99
—
$219.89
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 30 )
$177.99
—
$213.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 215 )
$103.99
—
$113.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$237.99
Eaton master differential installation kits make upgrading your differential easier by providing all the components needed to properly setup your Eaton differential or replace your ring and pinion, all in one box. They include premium bearings and components to ensure long life and quiet operation. For a smooth installation, choose the kit with the best parts designed to deliver the best performance--Eaton master differential installation kits. Order the kit best suited for your application.
( 8 )
$197.99
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 156 )
$148.99
—
$228.99
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 336 )
$211.99
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 140 )
$261.83
When it comes time to replace your worn-out or failed 4WD differential actuator, look no further than Dorman. These replacement front axle actuators are available in the original vacuum or electric-style, just like OEM. Trust Dorman for the trouble-free engagement of your 4WD system.
( 51 )
$172.95
Motive Gear open differential internal kits are an efficient and economical solution for rebuilding your worn-out carrier components. They're available for a wide range of axle models, and typically include replacement gears and hardware necessary to restore traction and control you depend on. Don't take a chance by reusing old gears or worn washers when performing a differential rebuild. Reduce future carrier problems and order the Motive Gear open differential internal kit designed to fit your application.
( 35 )
$213.99
Yukon Gear & Axle spider gear kits offer better performance for your differential. Utilizing high-quality materials and better-than-OE design, Yukon spider gears get you through turns with the traction that you need. The kits are available in a variety of carrier styles and are compatible with dozens of axle models, front and rear. Improve your differential with the addition of a Yukon Gear & Axle spider gear kit.
( 69 )
$187.99
Do you have a twisted or broken axle? Dorman offers roughly 100 replacement axle shaft kits to remedy the problem. They're available in various styles, as well as dozens of precise lengths and spline counts for direct fitment on any corner of your vehicle. Dorman axles include components manufactured from quality materials—designed to install in the stock location without any modifications. Get your vehicle rolling again with dependable Dorman axle shaft kits.
( 151 )
$107.99
—
$208.95
Get a perfect fit and dependable performance with Motive Gear OEM replacement axle shafts! They are made from top-quality steel and available for a wide range of applications.
( 7 )
$249.99
—
$252.99
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 65 )
$125.99
—
$153.99
Yukon Gear & Axle minimum install kits are perfect when you just need the basics. They're a low-cost solution for gear changes in newer vehicles where the bearings can be reused. Available for a wide variety of applications, the kits come with high-quality components to ensure a smooth setup. Yukon minimum install kits include: * Pinion seal * Crush sleeve (where applicable) * Complete shim kit * Gear marking compound and brush * Pinion nut, O-ring, baffles, slinger (varies by application) * Extensive instruction manual
( 11 )
$108.99
—
$117.99
Yukon Gear & Axle differential carrier cases offer the strength and quality you demand for your ride. Available for many axles and ratios, these cases are constructed from first-rate materials to strict standards, ensuring durable, reliable performance.
( 21 )
$274.99
EXCel by Richmond Gear ring and pinion installation kits include all you need to help complete your ring and pinion installation. When trusting your differential refresh or new install, look to EXCel from Richmond Gear. They bring you all the reliability of the Richmond Gear name with the affordability of carefully selected quality components for your vehicle. Ring and Pinion Gear installation kit features: * High quality bearings from Koyo * Grade 8 fasteners, gaskets, seals, shims, bolts and other hardware * Gear marking compound * All-in-one packaging offers rapid installation
( 9 )
$180.99
Motive Gear differential pinion bearing kits are designed and assembled to make your repair, installation or complete differential overhaul as smooth and trouble-free as possible. These kits include high-quality pinion bearings, crush sleeve, marking compound, a brush, pinion nut, pinion seal, pinion shims and thread locking compound. Order the kit that is best suited to fit your application.
( 2 )
$178.99
—
$270.99
Yukon Gear & Axle bearing kits offer quality and cost savings. When you don't need a master overhaul, these kits can save you some money. They include Timken bearings and races, along with high-quality small parts--and each kit is checked for the right fit to meet your application and replacement needs. These packages are available for dozens of axle models. So when you're ready to install replacement ring and pinion gears in your differential, start with a dependable bearing kit from Yukon. Yukon Gear & Axle bearing kits include: * Pinion bearings * Carrier bearings * Crush sleeve (where applicable) * Oil baffles and slingers (where applicable) * Pinion seal * Gear marking compound and brush
( 8 )
$166.99
Differentials are the unsung heroes of vehicle performance. Some are open, while others have Trac-Loks, and a few are lockers. Crown Automotive differential carrier rebuild kits are designed and built to keep them working properly. Built to OEM specs for excellent fit and reliable performance. They provide the necessary parts to update each differential and keep power going where it belongs. Differentials put their all into transferring power from the transmission to the axles. When they decide to take a break, put them back to work with Crown Automotive differential carrier rebuild kits.
( 3 )
$123.99
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$226.99
—
$253.99
Get the right traction with Standard Motor Products 4WD selector switches. These 4WD dash mount OE replacement switches keep your rig ready for on and off-road adventures. Standard's robust switches are built with high-grade materials to meet your stringent demands. You're ready to travel on path or pavement, in wet or dry conditions, when you replace your old 4WD selector switches with new ones from Standard Motor Products.
( 5 )
$246.99
Help your vehicle's axles achieve optimal performance with an assist from genuine OE Mopar Replacement axle nuts. They feature high-quality materials and provide the proper fit, form, and function for your vehicle to restore like-new performance and safety. Order the Mopar Replacement axle nuts specifically designed for your year/make/model application.
Not Yet Reviewed
$137.99
Cardone remanufactured CV drive axles have neoprene boots ensuring excellent ozone resistance, which eliminates cracking, a leading cause of boot failure. Boot clamps are pneumatically crimped creating a perfect seal between the boot and housing. High-quality grease withstands high-temperature and pressure extremes, which extends joint life. High-tech grinding machines maintain the original design of the outer housing, race, and cage to guarantee reliable performance. Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles. Their threads are chased to ensure proper fit when the axle nut is installed.
( 25 )
$105.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
