Availability
Showing In Stock Items. Show All 40 Items.
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 172 )
$134.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$248.99
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$50.99
—
$113.99
Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines. Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand pump and pressure gauge. The kits are available for a variety of master cylinders.
( 648 )
$82.35
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 9 )
$149.99
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$21.99
Powerhouse Products valve spring compressor tools simplify changing your valve springs. These engine-specific tools eliminate the need for cylinder head removal, which can be a major time saver. Order the compressor tool recommended for your application.
( 2 )
$160.95
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$111.99
OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.
( 2 )
$806.99
Motive Products aftermarket power bleeder cap adapters work with Wilwood or Tilton power bleeders. These adapters connect to the brake fluid reservoir. If you already have a power bleeder for one car, but now need to work on a car with a different type of cap, you can simply buy the adapter.
( 10 )
$51.45
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
Summit Bucks
Performance Tool pulley removal tools are designed to remove most one and two groove power steering and alternator pulleys. These pullers feature heavy-duty construction and adjustable jaw tension.
( 14 )
$16.99
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$131.02
Lisle fuel injector remover and installer kits come with three application specific attachments. Remove the shoulder bolt to switch between the attachments. The injector puller can handle a variety of injectors that are commonly found in Cummins and Duramax engines. The two-jaw design firmly grips the injector while it is being removed by the slide hammer. These kits save time and reduces the likelihood of damaging the injector or head.
Not Yet Reviewed
$165.99
South Bend Clutch alignment tools are designed to align the flywheel and clutch disc for trouble-free insertion of the input shaft. The clutch alignment tools are designed to help make the installation of your new clutch much faster and easier and are available for a wide variety of makes, models, and transmissions. Select the tool designed for your specific application needs.
( 1 )
$5.81
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 84 )
$160.95
Holley crankshaft seal installation tools keep the seal straight and square during installation, eliminating seal damage. Featuring diecast aluminum construction, the seal installation tool is to be used along with a standard harmonic balancer installation tool to properly install the crankshaft seal in the timing cover. These special tools from Holley are available for your Gen III Hemi or 7.3L Godzilla engine. Choose the one for your engine. Holley installation tools are available to: * Work with Holley Gen III Hemi mid-mount accessory drive systems and stock factory timing covers * Work with 7.3L Godzilla engine and Holley and stock factory timing cover
( 1 )
$24.99
Proform Oil Pump Primer Sockets make a time-consuming job quick and easy. Made of hard anodized aluminum, the socket tools slip over the crankshaft and snug into the splines of the oil pump. To use, the oil pump drive gear must be removed from the crankshaft. When assembling an engine, these sockets can be used with the timing cover on or off. Order the model recommended for your vehicle year/make and engine application. (NOTE: This is for aftermarket setups only, because the OEM oil pump drive gear will not come off separately. Use a 3/8 in. adapter and a power drill to prime away happily.)
( 1 )
$69.99
If your spare tire tool kit is missing, replace it ASAP with one of Dorman's spare tire tool kits. The last thing you want is to be stuck on the side of the road unable to service your vehicle's tire. These kits are a cost-efficient and time-saving alternative to purchasing each tool separately. They come with the necessary equipment to remove/install wheels, lug nuts, and a jack tool to raise/lower the spare tire (where applicable). Components are constructed of steel and powdercoated for lasting durability. A carry case is included to safely organize the kit within your vehicle's factory storage compartment. Order the kit designed for your vehicle application.
( 6 )
$48.99
Dorman spare tire hoists hold your spare tire in place under your vehicle. They are manufactured from high-quality materials for durability and they undergo rigorous inspection to ensure high quality. They are direct replacements for a perfect fit, they are easy to install, and they are coated to prevent rust and corrosion. Trust Dorman to keep your tire in place with their spare tire hoists.
( 42 )
$203.95
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
Dorman multipurpose funnels are available for any number of automotive maintenance applications. They're constructed of quality materials for longevity and are available in a range of sizes. Direct your fluids precisely into their reservoirs without spilling onto other engine parts—economical Dorman funnels make it possible!
( 9 )
$6.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
