Availability
Showing In Stock Items. Show All 12 Items.
On Sale
The industry standard for over 30 years, Hurst Competition/Plus shifters offer state-of-the-art control for popular 4-, 5-, and 6-speed manual transmissions. Dedicated applications ensure a custom fit on a wide variety of vehicles with factory consoles without any floor pan modifications. Other features include race track-proven design and reliability, adjustable gear stops to prevent over shifting and prolong transmission life, and an easy-to-follow installation guide.
( 120 )
$582.95
—
$630.95
$523.95
—
$566.95
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$631.95
$538.95
—
$567.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$625.95
—
$799.95
$562.95
—
$718.95
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
This is it--the ultimate combination of design, function, and sheer performance. The Magnum Grip Pro Bandit shifters feature an easy-to-operate, gate-type mechanism. CNC machined from 6061-T6 aluminum, Magnum Grip Pro Bandit shifters are then polished and clear anodized for corrosion resistance and great looks. They're only available as rear exit cable models, and are designed for Powerglide transmissions with standard or reverse shift pattern valve bodies.
( 2 )
$849.95
$552.95
On Sale
Clearance
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$569.99
—
$626.99
$512.99
—
$564.29
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,349.95
$742.95
On Sale
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$649.95
$583.95
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$564.95
—
$1,149.95
$507.95
—
$632.95
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$599.95
$538.95
On Sale
Hays classic clutch kits are great replacements for original equipment units. They're available for all three major clutch types, diaphragm, Borg & Beck, and Long, and feature clutch discs with sprung hubs and organic linings. There are applications for a huge range of domestic vehicles, including pony cars, muscle cars, classics, and pickups. Kits come complete with pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). Pilot bushing not included.
( 11 )
$749.95
$673.95
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$961.95
$529.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
