Availability
Showing In Stock Items. Show All 134 Items.
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 443 )
$54.45
$49.05
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$155.95
$126.85
—
$140.35
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$435.95
—
$573.95
$391.95
—
$515.95
On Sale
B&M automatic StarShifters normally work like standard detent shifters, but by simply pulling the lockout trigger and moving the stick to low, they become full ratchet action shifters for quick gear changes. With a cable-operated mechanism, a universal floor-mount console, NHRA/IHRA-approved reverse lockout, a neutral safety switch, and a polished aluminum T-handle, the StarShifters are at home on the street or the track.
( 156 )
$340.95
$306.85
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 222 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$73.69
$66.35
On Sale
B&M truck shifters feature the classic Megashifter design, in a configuration that will fit your light truck! All of the things that you expect in a B&M shifter are right here and ready to install. The Truck Megashifters include a taller base and an adjustable floor mount bracket for proper installation.
( 57 )
$527.95
$474.95
On Sale
Do you want to move a column shifter to the floor of your project car and still retain that performance flavor? B&M Unimatic shifters are just the ticket! They look identical to a manual 4-speed shifter and, because of their cable-operated design, they can be easily installed. Like the B&M top line shifters, they include a neutral safety switch and a 5 ft. cable and a black plastic T-handle.
( 73 )
$299.95
$269.95
On Sale
B&M Pro Ratchet automatic shifters have the style and quality for professional racing, along with easy ratchet action. The Pro Ratchets have an NHRA/IHRA-approved reverse lockout that can be operated with one hand, a neutral safety switch, and a backup light switch. They work with both forward and reverse pattern valve bodies and most 3 and 4-speed transmissions. Additional installation kit required for some transmission models. Compatible with CO2 and electric shifters, these shifters include a brushed aluminum cover and a 5 ft. super-duty race cable.
( 86 )
$449.95
—
$487.95
$403.95
—
$438.95
On Sale
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 37 )
$649.95
—
$1,049.95
$583.95
—
$943.95
On Sale
The industry standard for over 30 years, Hurst Competition/Plus shifters offer state-of-the-art control for popular 4-, 5-, and 6-speed manual transmissions. Dedicated applications ensure a custom fit on a wide variety of vehicles with factory consoles without any floor pan modifications. Other features include race track-proven design and reliability, adjustable gear stops to prevent over shifting and prolong transmission life, and an easy-to-follow installation guide.
( 120 )
$599.95
$538.95
On Sale
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,591.95
—
$2,777.95
$2,332.76
—
$2,500.16
On Sale
These B&M automatic Sport shifters offer good looks and performance. Features include: * Black T-handle * Chrome steel stick and plate * Rubber boot * Black plastic console; can be trimmed to custom-fit any floor * Neutral safety switch * Backup light switch * Lighted gear indicator
( 48 )
$362.95
$326.65
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 546 )
$779.95
—
$1,049.95
$700.95
—
$943.95
On Sale
B&M QuickSilver automatic shifters have cable-operated ratchet action for dependability, and a chrome plated stick and cover for good looks. These QuickSilver shifters include an NHRA/IHRA-approved reverse lockout, a lighted gear indicator, and they will work with reverse pattern valve bodies.
( 171 )
$483.95
$434.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$514.95
$462.95
On Sale
Hurst Competition/Plus shifters have been the benchmark of transmission control and race-proven since 1963. When you are ready to install one, be sure to choose the correct kit for the right fit. Hurst Competition/Plus shifter installation kits are custom designed to fit directly into your vehicle, with the least possible modifications, and to give you firm positive shifts every time. They come with everything necessary (shifter not included) to install your Hurst Competition/Plus shifter in your car. Features: * All parts, hardware, and installation instructions * Hardened steel shift linkage rods * Nylon bushings and spring clips * Shifter mount plate
( 213 )
$299.95
—
$328.95
$269.95
—
$296.05
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$949.95
$359.95
—
$853.95
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 29 )
$619.79
—
$864.79
$579.79
—
$824.79
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$464.95
—
$599.95
$417.95
—
$538.95
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$899.95
$695.95
—
$808.95
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 303 )
$899.95
—
$1,229.95
$808.95
—
$1,105.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
