Availability
Showing In Stock Items. Show All 114 Items.
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 23 )
$33.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$38.99
—
$53.99
These Chevrolet Performance Parts MAF sensor housing adapters are designed to get your MAF sensor mounted properly. They are manufactured from quality materials and install onto the MAF sensor with no modifications.
( 7 )
$20.19
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 24 )
$23.99
—
$50.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$47.99
—
$50.99
Clearance
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 35 )
$42.99
$21.50
—
$38.99
Summit Bucks
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$20.99
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$34.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$39.99
—
$52.99
Summit Bucks
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$27.99
—
$49.99
Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions
( 97 )
$43.99
—
$44.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$21.99
—
$37.99
ACDelco GM Genuine Parts vehicle speed sensors report vehicle speed to the instrument panel and engine control module, and are GM-recommended replacements for your vehicle's original components. The sensors signals are used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM Genuine Parts vehicle speed sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$41.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$45.99
Summit Bucks
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$24.99
—
$30.99
ACDelco GM Genuine Parts camshaft position sensors are a GM recommended replacement ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. GM Genuine Parts camshaft position sensors have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 11 )
$29.99
—
$35.99
ACDelco GM Genuine Parts combination switches are factory-recommended replacements for a variety of applications. Combination switches are complex, controlling multiple functions such as the headlights, turn signals, cruise control, and windshield wipers on your vehicle. These original equipment combination switches are manufactured to provide the same fit, performance, durability, and service life you expect from General Motors.
( 1 )
$49.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$32.99
—
$47.95
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$39.79
—
$40.79
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 68 )
$20.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 36 )
$43.99
ACDelco GM Genuine Parts ignition coils are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. They increase electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery's charge, and provides power to the electrical accessories while the engine is running. GM Genuine Parts ignition coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed.
( 7 )
$46.99
Dorman wiring connectors are designed to facilitate the flow of electrical current over a broad range of applications. The small components are available in a variety of styles to fit your specific application or universal fit needs. Choose Dorman wiring connectors for a reliable connection every time.
( 64 )
$21.99
—
$50.99
Summit Bucks
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$32.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
