Availability
You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.
( 676 )
$177.99
—
$214.99
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1509 )
$249.99
—
$299.99
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 49 )
$399.99
—
$799.91
Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).
( 214 )
$467.78
Our Summit Racing™ complete front drum-to-disc brake conversion kits take the guesswork and high price tag out of building a braking system. The kits are available in standard and ultra versions (ultra versions include cross-drilled, slotted rotors and braided brake lines). Order the model recommended for your vehicle. Summit Racing™ complete brake conversion kits include: * Power brake booster * Master cylinder * Proportioning valve kit (where applicable) * Rotors * Calipers * Backing plates (where applicable) * Spindles or brackets to convert existing spindles (depending on application) * Brake hoses and banjo bolts (where applicable) * Bearings * Seals * Dust caps * Spindle nuts and washers * Installation hardware
( 39 )
$907.95
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 4 )
$3,625.99
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 310 )
$205.95
—
$652.95
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1110 )
$132.99
—
$272.99
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 428 )
$289.99
—
$309.99
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 99 )
$2,049.95
—
$2,149.95
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 186 )
$147.99
—
$191.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 883 )
$204.99
—
$335.99
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 436 )
$374.95
—
$749.95
Summit Racing™ LS conversion headers are made of 304 stainless steel and offer great quality, performance, and affordability. These will allow you to swap an LS into almost anything and provide more clearance than manifolds at the collectors. Our headers are mandrel bent, TIG-welded, and feature a polished stainless steel construction. They also feature V-Band collector construction, collector merge spikes, and include collector stubs, bolts, and graphite manifold gaskets for easy installation.
( 19 )
$289.99
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1744 )
$126.99
—
$448.99
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 431 )
$54.45
If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.
( 58 )
$79.99
—
$99.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1931 )
$118.95
—
$276.95
The timeless styling of Cragar S/S Super Sport wheels is a great look for any American musclecar--old or new! Cragar 61C Series S/S wheels offer a classic 5-spoke pattern in a beautiful mirror chrome finish, making them eye-catching classics just right for your ride. Their composite construction features chrome plated steel rims mated to aluminum alloy centers--no polishing is needed, leaving you more time for cruising! And these 61 Series original S/S designs afford you the advantage of direct bolt fitment in various widths and diameters. Give your muscle updated versions of the most popular wheels ever--Cragar 61C Series S/S Super Sport wheels.
( 287 )
$336.74
—
$396.00
Swapping a GM LS based engine just got a lot easier! Summit Racing™ Pro LS cast aluminum oil pans are specifically designed to install an LS engine in a variety of GM muscle car and truck chassis. These pans offer OEM fitment, oil filter mounting, oil cooler provisions, and use OEM-style gaskets. They are manufactured from cast aluminum to provided proper structural rigidity and heat dissipation. The pans include a baffle, oil pickup tube, sump plug, oil filter stud, and oil passage cover.
( 18 )
$379.99
—
$399.99
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 81 )
$728.72
—
$1,149.00
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 231 )
$287.99
—
$394.99
Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 14 )
$3,099.99
Saggy, old springs can ruin your ride. Restore factory-fresh handling with stock-height rear leaf springs from Summit Racing™. They will fit and perform just like the originals, making the install easier and your ride quality like-new. Select the rear leaf springs designed for your vehicle.
( 44 )
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
