Availability
Showing In Stock Items. Show All 41 Items.
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 52 )
$599.95
—
$799.91
These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.
( 16 )
$646.70
—
$679.06
Painless Performance 24-circuit 1967-68 Camaro and Firebird harnesses are designed as direct replacements for your vehicle. They use a 1969 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modifications are required. Factory original quick connect terminals are included for the in-dash printed circuit board. Each harness includes a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers and washer pump
( 18 )
$584.99
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 64 )
$799.95
These Meziere True Start 500 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature a super duty drive and custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments.
( 13 )
$679.06
DiabloSport Trinity 2 EX Platinum Performance programmers are game-changers! Trinity (T2) EX units are extremely capable performance tuners and feature-packed monitor/data logger devices—offering the best of both worlds. They feature an impressive, high-resolution 5 in. capacitive touchscreen, full swipe functionality, and industry-leading gauge designs; plus, jaw-dropping power potential and a powerful, yet simple user interface. DiabloSport Trinity 2 EX Platinum Performance programmers feature: * Full-color, high-definition 5 in. touchscreen * Lightning fast read/write times * Performance tuning for mileage, towing, daily driving, and performance * One-Touch, easy menu navigation * Full data-logging capability * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Correct speedometer and adjust speed/rev limiters (Options, features and coverage may vary, based on vehicle application) * AFM/MDS active fuel management options (Options, features and coverage may vary, based on vehicle application)
( 32 )
$710.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 618 )
$699.95
—
$749.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$528.95
—
$579.95
MechMan Elite Series billet alternators offer great amperage output and durability. Their 6-phase technology, combined with massive twin rectifier assemblies and 12 diodes, makes these stunning alternators totally durable for daily use. Plus, the 6-phase hairpin stators make the alternators fundamentally more efficient, equating to incredible output at extremely low engine rpm, less energy wasted in the form of heat, and more horsepower to the wheels. MechMan Elite billet models are available for replacement or upgrade, and they are available in a unique selection of finishes and amperage outputs. Choose one designed for your vehicle.
( 10 )
$524.00
—
$699.00
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 401 )
$517.95
MechMan Elite Series cast alternators offer great output at idle RPM and excellent durability in a direct bolt-in package. Their 6-phase technology, combined with massive twin rectifier assemblies and 12 diodes, makes these alternators totally durable for daily use, while still maintaining great output at low-rpm. These alternators will make 180 amps at engine idle speeds—with a full 250 amp output at cruising speeds. The units come with an OEM diameter pulley, making them perfect for high-rpm and racing use. They're available for fitment on a wide range of cars, trucks, and vans from the 1990s and up. Order the model recommended for your application. (Note: Elite Series cast alternators may require a rectangle to oval adapter harness if your vehicle was equipped with the CS144 heavy-duty charging option from the factory. This is not common.)
( 7 )
$549.00
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
MechMan S Series 6-phase alternators offer incredible output in a compact and durable package. The 240 amp models offer the best balance between peak output, and output at engine idle RPM; while the 320 amp models are all about max power and not designed to charge at low idle speeds. Both S Series alternators feature 12 diodes, twin rectifier plates, and outstanding airflow ensure long service life, even in severe conditions. These units come equipped with a smaller 1.75 in. diameter alternator pulley, and will require a slightly shorter drive belt to be installed for proper belt tension. Order the model recommended for your auto application.
( 29 )
$519.00
—
$575.00
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$530.97
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 639 )
$599.95
As LS engines make their way onto the race track MSD is ready with the Circle Track LS ignition controls. You're off to the races with MSD. Circle Track LS ignition controls feature: * Direct plug-in to factory GM LS sensors and coils * Preprogrammed to run the GM CT525 crate engine out of the box * Laptop programmable rpm limit, timing curve, and coil selection for custom tuning * Auto detects coils, cam sensor, and crank sensor * Will run 24x 1x, 58x 1x, and 58x 4x crank/cam sensor combinations * Self-powered with USB for laptop programming * Steady, accurate timing control * Dedicated plug for Tech Official
Not Yet Reviewed
$549.95
MechMan Elite Series alternators offer the highest possible amperage and durability available in a reasonably sized alternator. Each one features MechMan's 6-phase technology combined with massive twin rectifier plates and 12 press-fit diodes for excellent durability. The 6-phase hairpin stators make the alternators fundamentally more efficient, equating to incredible output at extremely low engine rpm, less energy wasted in the form of heat, and more horsepower to the wheels. Choose the Elite alternator designed for your vehicle.
( 21 )
$549.00
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 49 )
$602.99
—
$734.99
DiabloSport Trinity 2 MX performance monitors are one of the best upgrades you can add to your ride! These advanced digital gauge solutions feature eye-catching, 5 in. capacitive-touch screens that give you the sharpest graphic display available—so you can keep a close eye on your vehicle while improving the aesthetics of your dash. An all-new, high-speed processor provides easy swipe gestures and navigation throughout the product, resulting in a user experience that will be like nothing else in the automotive aftermarket. DiabloSport Trinity 2 MX performance monitors feature: * Full-color, high-definition 5 in. touchscreen * High-speed data logging with export capability * Customizable gauge screen "layouts" allow you to create and customize numerous layouts containing up to 5 different gauge screens per layout * One-Touch, easy menu navigation * Composite video input for backup camera * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Swipe the screen left or right to toggle between user-selected gauge screens within a layout * Custom color mixer to customize gauge arcs, backgrounds * Switch between imperial or metric units of measure * Performance tests like 1/4 mile, 0 to 60 mph
( 1 )
$669.95
These mini starters from Chevrolet Performance feature a compact design that delivers plenty of torque and increased clearance for extended oil pans and header exhaust systems. These lightweight and powerful starters rely on a 3.75:1 gear reduction to spin a high-compression engine.
( 17 )
$510.56
On Sale
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$977.95
—
$1,078.95
$733.46
DiabloSport Trinity 2 EX Performance programmers are game-changers! Trinity (T2) EX units are extremely capable performance tuners and feature-packed monitor/data logger devices—offering the best of both worlds. They feature an impressive, high-resolution 5 in. capacitive touchscreen, full swipe functionality, and industry-leading gauge designs; plus, jaw-dropping power potential and a powerful, yet simple user interface. DiabloSport Trinity 2 EX Performance programmers feature: * Full-color, high-definition 5 in. touchscreen * Lightning fast read/write times * Performance tuning for mileage, towing, daily driving, and performance * Up to an additional 100 hp and 250 torque on diesel applications; 90 hp and 90 torque on gas * One-Touch, easy menu navigation * Full data-logging capability * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Correct speedometer and adjust speed/rev limiters (Options, features and coverage may vary, based on vehicle application) * AFM/MDS active fuel management options (Options, features and coverage may vary, based on vehicle application)
( 9 )
$710.95
On Sale
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 55 )
$599.95
MechMan 6-phase hairpin high-output alternators offer a solution to the inadequate alternators that come from the factory on specified vehicles. These replacement units feature twin rectifiers with 12 massive press-fit diodes, as compared to the small 8-diode rectifier in the stock alternator. Even mild performance builds will typically consume more amperage than what stock alternators can provide. Hairpin stator technology provides better high-rpm durability and better resistance to heat from the turbo manifold. The alternators utilize a high rpm-friendly larger diameter pulley, and bolt directly in place of the original equipment. Select the high-output racing alternator model recommended for your application. Note: A 4-gauge or larger positive and negative cable needs to be run between the alternator and the battery terminals for proper function.
( 1 )
$519.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
