PONTIAC CHIEFTAIN - Free Shipping on Orders Over $109 at Summit Racing

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.65 out of 5 stars ( 1006 )

$100.79

—

$231.68

PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems

4.7 out of 5 stars ( 209 )

$130.64

—

$164.04

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.34 out of 5 stars ( 295 )

$192.15

—

$201.46

Edelbrock Performer RPM Street Fuel Pumps

Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.

4.32 out of 5 stars ( 436 )

$191.95

Summit Racing™ Electronic Distributor Conversion Kit

Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.

4.6 out of 5 stars ( 15 )

$167.99

PerTronix Ignitor III® Solid-State Ignition Systems

These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.

4.51 out of 5 stars ( 84 )

$195.96

SCE AccuSeal Pro Rear Main Seals

SCE AccuSeal Pro rear main seals are made from top-quality Viton® material known for its excellent heat and chemical resistance. These one- or two-piece replacements are available for a wide range of vehicles from the 1950s and up. Count on SCE AccuSeal Pro rear main seals for dependable, leak-free performance!

4.36 out of 5 stars ( 11 )

$111.86

—

$114.97

Proform Street/Strip HEI Distributors

Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.

4.06 out of 5 stars ( 171 )

$171.99

SCE AccuSeal Pro Oil Pan Gaskets

SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.

3.58 out of 5 stars ( 12 )

$147.71

The Right Stuff Brake Rotors

The Right Stuff offers replacement brake rotors for a variety of applications in solid surface or cross-drilled and slotted styles. These rotors are made from high-quality materials to The Right Stuff's exacting standards for perfect fit and function, making them a great choice for your disc brake conversion. Order the model designed for your vehicle application.

4.29 out of 5 stars ( 119 )

$133.99

Gabriel Load Carrier Shocks

Gabriel Load Carrier shocks are the perfect combination of shock and spring technology to help reduce the loss of ride height in ongoing loaded conditions. These front and rear spring-assist shocks feature a chromed piston rod to inhibit corrosion—as well as ensure proper seal lubrication and provide a more consistent wear surface. Load Carriers also have a leakproof design to help prolong their life. Models are available for hundreds of vehicle-specific applications.

4.63 out of 5 stars ( 232 )

$111.99

PerTronix Ignitor II® Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger

4.68 out of 5 stars ( 31 )

$175.28

—

$197.63

Gabriel HiJackers Air Shocks

Gabriel HiJackers air shocks are the original air-adjustable shocks designed to provide customizable performance and support. They can be adjusted and readjusted to maintain proper ride height—and handle any of your temporary towing or hauling needs, including boats and campers. Hijackers feature chrome plated piston rod construction and deluxe wiper seals that provide optimum sealing. Dozens of models are available, covering thousands of applications.

4.56 out of 5 stars ( 619 )

$160.99

On Sale

ACCEL Points Eliminator Conversion Kits

ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools

4.06 out of 5 stars ( 51 )

$116.95

American Autowire Breakerless Se Ignition Systems

American Autowire Breakerless Se ignition systems are made with the highest quality materials to ensure long-lasting durability and performance. They are designed to operate with early model GM vehicles. If it's time to update or upgrade your ignition system, American Autowire Breakerless Se ignition systems are the way to go.

4.57 out of 5 stars ( 21 )

$213.75

Zoom MU Series Clutches

Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation

4.31 out of 5 stars ( 242 )

$121.99

—

$187.99

Zoom 30000 Series Clutches

Zoom 30000 Series clutches are designed for 60s and 70s American muscle cars. These sets include higher clamp load Zoom assemblies and organic clutch discs (except where noted) with high burst strength organic facings. They also come complete with release bearing, pilot bearing/bushing, and alignment tool. Features include: * 20 to 60 percent increase in torque capacity over a stock clutch * Complete 5 piece sets include everything needed to do the job right * Premium, high burst strength organic facings * Higher clamp load cover assemblies with Zoom anti-rust finish * Specifically for '60s and '70s American muscle cars with mechanical linkages

4.19 out of 5 stars ( 53 )

$167.99

On Sale

ACCEL Super Coils

ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.

4.53 out of 5 stars ( 808 )

$116.95

$105.25

On Sale

ACCEL 300+ Ferro-Spiral Race Wire Sets

ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.

5.0 out of 5 stars ( 1 )

$176.95

$118.57

PRW Sportsman Steel Roller Tip Rocker Arms

PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls

3.76 out of 5 stars ( 33 )

$207.41

On Sale

Mallory Unilite Breakerless Ignition Conversion Kits

Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.

3.33 out of 5 stars ( 6 )

$152.95

$137.65

McGaughy's Lowering Coil Springs

McGaughy's lowering coil springs are designed to lower the front of your vehicle up to 3 in. and the rear up to 5 in., depending on the kit you order. These springs are built from chromium alloy steel and are wound, shot-peened to exacting specifications to ensure proper ride height, ride quality, and product longevity. The springs are then powdercoated for added durability. Achieve the vehicle stance you want--upgrade your stock springs with a set of McGaughy's lowering coil springs.

4.57 out of 5 stars ( 74 )

$163.99

—

$164.99

Hotchkis Sport Suspension Tie Rod Sleeves

Improve the steering feel and eliminate the flex of the factory tie rod sleeves with this pair of Hotchkis Sport Suspension tie rod sleeves.

4.27 out of 5 stars ( 37 )

$120.48

On Sale

Summit Racing™ Direct-Fit Door Sill Plates

Summit Racing™ offers direct-fit door sill plates for a wide range of vehicles from the 1950s, '60s, '70s, and '80s. The door jamb step plates are machined from quality materials with a clear anodized finish for protection and are identical to the factory originals, including the engraved or riveted logo emblems. Door sill plates take a lot of abuse, with driver and passengers getting in and out of their vehicle. Now you can replace these highly visible components economically with quality reproduction parts from Summit Racing™. Order the model designed for your vehicle application.

4.4 out of 5 stars ( 10 )

$113.99

—

$213.99

PONTIAC CHIEFTAIN Parts and Accessories