Availability
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 44 )
$2,999.99
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,125.95
—
$4,559.95
Using the latest technology, J.W. Performance has come up with these Ultra-Bell bellhousings. Built rugged and certified, these flexplate shields allow for special motor and transmission combinations to be easily mated together. Manufactured from one-piece cast aluminum, these Ultra-Bells are five times stronger than stock bellhousings, which makes them capable of withstanding even the most severe tire shake and can fit under most stock floorboards. Order the Ultra-Bell bellhousing designed to fit your application.
( 79 )
$469.88
On Sale
The industry standard for over 30 years, Hurst Competition/Plus shifters offer state-of-the-art control for popular 4-, 5-, and 6-speed manual transmissions. Dedicated applications ensure a custom fit on a wide variety of vehicles with factory consoles without any floor pan modifications. Other features include race track-proven design and reliability, adjustable gear stops to prevent over shifting and prolong transmission life, and an easy-to-follow installation guide.
( 120 )
$630.95
$523.95
—
$566.95
On Sale
Hurst Competition/Plus shifters have been the benchmark of transmission control and race-proven since 1963. When you are ready to install one, be sure to choose the correct kit for the right fit. Hurst Competition/Plus shifter installation kits are custom designed to fit directly into your vehicle, with the least possible modifications, and to give you firm positive shifts every time. They come with everything necessary (shifter not included) to install your Hurst Competition/Plus shifter in your car. Features: * All parts, hardware, and installation instructions * Hardened steel shift linkage rods * Nylon bushings and spring clips * Shifter mount plate
( 213 )
$299.95
$269.95
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 4 )
$4,195.00
—
$4,295.00
Summit Racing™ offers Street-Strip Performance clutch kits for hundreds of cars, trucks, and vans. They're ideal for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. These kits provide a heavier pedal effort than stock, along with improved holding capacity, making them excellent high performance replacement clutches. Order the size and options recommended for your vehicle. Additional details: * Can accommodate up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity * Kits include a pressure plate, disc, throwout bearing (unless specified otherwise), and alignment tool
( 6 )
$315.99
Summit Racing™ offers clutch kits to fit thousands of vehicle applications. These stock-style replacements are engineered to OE design and performance standards. They will work in tandem with your transmission to deliver smooth gear shifts and an enjoyable ride. Besides the quality product, Summit Racing™ clutch kits present a fantastic value. Order the model recommended for your car, truck, Jeep, or SUV.
( 94 )
$166.99
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 113 )
$25.99
—
$27.99
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 200 )
$452.99
Summit Racing™ OE replacement flywheels offer a great fit and an economical price. They are manufactured from ductile iron and offer original fit and function. Replace your old flywheels with Summit Racing™ OE parts.
( 68 )
$194.99
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$365.00
With the largest selection of remanufactured torque converters in the world to fit any transmission, model, or vehicle application, all VEGE remanufactured torque converters are built with parts that are of equal quality or higher quality than OEM (Original Equipment Manufacturer) parts, including VEGE's heavy-duty remanufactured torque converters. You can expect the best with VEGE! Specializing in reliable, yet affordable, sealed torque converters, VEGE torque converters are among the most popular in the industry. Their unique process combines the skillful experience of bench craftsman with the industrial engineering production line. Choose the torque converter model suited to your application needs.
( 10 )
$288.99
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.
( 263 )
$10.99
—
$53.99
Classic Performance OE drum brake hub kits include all the necessities for a revamp on your brake system. Only the best materials are used—to endure all the street and strip driving you experience. These kits are ideal for builders and Chevy or Buick enthusiasts looking to complete any restoration. They're available for hundreds of applications from the 1960s and '70s. Select the model recommended for your vehicle.
( 22 )
$98.99
RAM Muscle Car clutch kits are the perfect choice for mildly modified street cars and trucks where driveability is most important. RAM Muscle Car kits are popular for older restoration vehicles as well as late model cars and trucks with basic bolt on engine modifications such as headers and air intakes. These RAM kits offer super smooth clutch engagement and increased holding power with only a slight increase in pedal effort. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 78 )
$279.00
—
$289.00
Designed for the rigors of a road course, Richmond Gear T-10 Plus 4-speed transmissions are built by American craftsmen. Using the latest CNC machining and in-house treatment, these T-10s are available in a multiple range of ratios. They combine race-proven synchro assemblies and NASCAR-proven technology to deliver the smoothness and strength needed for the demands of a road course. Engineered with a pro-quality approach, the Richmond Gear T-10 Plus transmissions deliver the quality and performance you expect!
( 6 )
$2,528.77
—
$2,994.99
Trans-Dapt transmission bellhousing adapters are designed to adapt your engine bellhousing flange to a specific style of transmission. They are made of steel and include the correct mounting hardware.
( 43 )
$140.99
On Sale
For the ultimate in performance, feel, and dependability, mount your Street Super shifter with the appropriate Hurst installation kit. The shifters mount high on the transmission allowing the shift arms to be almost completely straight for added strength and leverage when racing. Hurst Street Super shifter installation kits include the necessary mounting plate, shift arms, hardened steel shift linkage rods, rod adjusting buttons, nylon bushings, spring clips, necessary hardware, and instructions.
( 13 )
$318.95
$287.05
Moser Engineering replacement C-clip axles are non-tapered with hardened bearing seats and machined C-clip grooves to fit OEM applications. These forged steel street axles are available in nearly two dozen lengths—and if you choose to narrow your rear-end at a later time, Moser axles can be shortened and re-splined. Order the model designed for your vehicle and axle application.
( 266 )
$168.00
—
$335.00
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 6 )
$939.00
Pro Series flywheel bolts from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register.
( 370 )
$40.99
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
—
$2,175.00
Our Summit Racing™ SFI-approved flexplates are built for racing. They're thicker than stock, double-welded with a forged one-piece ring gear. Available in several internally and externally balanced applications. NOT FOR MARINE APPLICATIONS.
( 499 )
$101.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
