Availability
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$439.95
—
$514.95
$285.95
—
$462.95
The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates
Not Yet Reviewed
$2,419.20
On Sale
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1159 )
$54.99
—
$70.99
Replace your sloppy factory non-adjustable throttle linkage with a Summit Racing™ adjustable throttle linkage rod. Our kits connect the factory arm on your muscle car's pedal with the throttle lever on your carburetor. Built from billet aluminum and incorporated with 1/4 in. heim ends, the rods work with most every aftermarket carburetor, ensuring maximum throttle opening when using high-rise intake manifolds. Multiple versions available for different length applications. Select the one needed for your application. Features: * Universal (fits Holley, Edelbrock, Carter, QuickFuel, Summit, etc. carbs) * Fits throttle levers with 1/2 in. hole * Adjustable to fit 6 to 9in. or 9 to 12in. lengths * Billet adjuster 1/4 in.-28 right and left hand heim joints
( 2 )
$39.99
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$349.95
—
$649.95
$314.95
—
$583.95
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$919.95
$398.36
—
$735.96
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$1,101.95
Summit Racing™ fuel filter assemblies are excellent reproductions, featuring glass bowls and the top is AC stamped, just like the originals. These vintage-style fuel filters provide classic looks for your classic vehicle.
( 1 )
$37.99
Tanks Inc. offers a wide assortment of fuel tank mounting straps for specific vehicle applications. The durable straps are available in a variety of finishes, such as galvanized and E-coated, and some of the models also include mounting hardware. Most use stock bolts and factory location. Secure your fuel tank with straps designed for your particular make and model.
( 39 )
$29.99
—
$43.99
Summit Racing™ fuel tank mounting straps are high-quality straps that are made of high-quality materials to ensure long-lasting durability and performance. If you're throwing a new fuel tank on your ride, Summit Racing™ has you covered.
( 32 )
$21.99
—
$34.99
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$236.95
OER Authorized fuel tank mounting straps are designed for replacing broken or missing straps that are a must have for properly holding your fuel tank. Designed to match the exact OE specs with durable materials that will last a lifetime.
( 7 )
$29.99
—
$47.99
These Summit Racing™ fuel pump block-off plates will seal your engine after you replace your mechanical fuel pump with an electric one. Made from billet aluminum and featuring a polished finish, they'll add some shine to your engine, too!
( 128 )
$25.99
On Sale
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$573.95
Fram fuel filters serve a vital function, screening out dirt and rust particles from your fuel before they can contaminate the carburetor and other engine parts. More than 600 models are available for fitment on a wide variety of make/models, and many of the filters can trap particles as small as 5 microns. Protect your fuel system with Fram; order the replacement filter designed for your vehicle application.
( 84 )
$4.99
—
$5.99
Top off your tank with one of these great looking OER gas caps! The quality replacements are offered in a variety of styles—from the standard-model reproductions to the RS, SS, locking Bowtie cap, and more. Made from premium materials to OE specifications, these caps provide the perfect look and fit for your restoration.
( 25 )
$24.99
Summit Bucks
Regular replacement of engine air filter elements is important for you and your car. Air filters trap airborne particles before they enter the engine. Excessively dirty filter elements decrease engine performance and increase fuel consumption. ACDelco Gold engine air filter elements use world-class filter technology to block 99 percent of airborne dust and dirt that can harm your engine--and they're available in panel and round styles to fit most vehicles. Benefits include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability for outstanding performance * The ability to trap microscopic dirt that can damage cylinder walls, pistons, and piston rings * Tight seals that help prevent unfiltered air from entering your engine * Sizes to fit virtually every car, light and heavy-duty truck, and SUV on the road today * Availability for virtually all makes and models * 12-month/12,000-mile limited warranty Round-style filters also feature: * A fine mesh screen to help reduce the risk of fire caused by engine backfires * Heat-resistant plastic on the top and bottom, with special sealing beads that provide a protective seal against automotive operating environments * A radial seal for easy installation on late model vehicles
( 126 )
$9.99
—
$34.99
These OER fuel filler neck hoses are designed to connect your gas tank to the fuel filler neck. They are manufactured from quality neoprene material and install in the factory location with no modifications.
( 18 )
$9.99
RESTOPARTS® Supplied fuel caps are reproductions finished in a bright zinc plating. These early metal caps are vented and feature the correct internal locking tabs or threads as well as the external cross bar for installing and removing the cap.
( 7 )
$17.99
Fuel filters are often forgotten--yet the gasoline, diesel, or biodiesel fuels we put into our vehicles typically contain contaminants such as dirt, rust, scale, and water. Such impurities can plug fuel injectors and carburetors, resulting in serious engine problems. The contaminants often originate from dirty and rusty storage tanks, and as the vehicle ages, from corrosion within the fuel system. While important for gasoline-fueled engines, fuel filters for diesel engines are especially critical. All diesel fuel contains some water--and removing it is crucial. The primary fuel filter for any diesel engine should always be a fuel/water separator and all WIX fuel filters for diesel engines feature Quickvent water removal capabilities. Biodiesel fuels have a solvent quality and a tendency to attract even more water, and increase the need for proper fuel/water separation. Whether gasoline or diesel, help your engine run cleaner, healthier, and longer with WIX fuel filters.
( 196 )
$3.99
—
$5.99
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$754.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$28.95
RESTOPARTS® Manufactured fuel caps are vented reproductions finished in a bright zinc plating. These early metal caps are vented and feature the correct internal locking tabs or threads as well as the external cross bar for installing and removing the cap.
( 8 )
$24.99
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 229 )
$148.99
—
$485.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
