Availability
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$690.00
—
$715.00
Tanks Inc. manufactures fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These are standard stock replacement kits for carbureted engine applications. They include the sending unit and pump in the tank, ready-to-go for installation. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank Kit options.
( 68 )
$579.99
—
$622.99
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 69 )
$519.00
—
$799.00
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$549.99
—
$674.99
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$849.95
$695.95
—
$763.95
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$569.99
—
$744.99
On Sale
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$799.95
$628.95
—
$718.95
Tanks Inc. manufactures EFI-Ready fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These EFI-Ready Fuel Tank Kits are designed for vehicles with engines retrofitted for electronic fuel injection. The tanks have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps. They include the sending unit and pump in the tank, ready-to-go for installation.
( 51 )
$535.99
—
$660.99
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
( 1 )
$678.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 403 )
$622.99
Granatelli Motor Sports is proud to offer a variety of performance throttle bodies for late model, drive-by-wire engines. Their throttle bodies are precision-machined to exceed the demands required for increased airflow on high performance applications, both naturally aspirated and forced induction. These upgraded throttle bodies can be used with factory or aftermarket manifolds and utilize the OEM harness connector. The increased size also allows for smoother and quicker engine acceleration--and there's no need to transfer anything over from the factory unit. Proper tuning is highly recommended after installation. Granatelli throttle bodies are available for hundreds of vehicles from the 1990s and up.
( 10 )
$633.41
—
$773.06
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$780.85
—
$799.95
On Sale
FiTech has partnered with TANKS Inc. to make your EFI upgrade even easier with a comprehensive line of new FiTech Go EFI fuel tank kits. Fuel injection demands higher pressure from an electric fuel pump, and the best place to mount a pump is in the gas tank. FiTech's in-tank module is supplied with a 340 lph fuel pump to support up to 800 hp. The fuel pumps bolt directly into the tank's recessed mount, providing a modern EFI solution for hot rods, classic trucks and muscle cars. FiTech Go EFI fuel tank kits also include the following: * Direct-fit tanks feature internal baffles for constant fuel delivery * In-tank pump module secures the supplied 340 lph pump in the tank * -6 AN inlet/outlet that provides leak-free fuel line connections * Recessed sending unit and pump mount that provides added clearance
( 23 )
$638.00
—
$681.00
$574.20
—
$612.90
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
On Sale
Holley 450 lph fuel pump modules feature billet pump flanges that connect to either single or dual 450 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 450 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
( 2 )
$723.95
$650.95
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$736.95
—
$865.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$786.95
—
$849.95
$552.95
—
$707.95
On Sale
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$649.95
$583.95
On Sale
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$573.95
On Sale
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 220 )
$599.95
$521.95
—
$649.95
Trick Flow® high-performance flow-matched fuel injectors feature all stainless-steel internals that provide industry-leading atomization and spray patterns, with linear flow at very low pulse widths. Trick Flow’s precision dynamic flow-matched injectors provide more consistent fuel delivery to each cylinder, resulting in reduced emissions, optimized power production, and safer engine operation when pushing the limits of performance. Just don’t take Trick Flow’s® word for it. The results have been verified by multiple USA-based third-party testing labs to ensure consistent results on a variety of test benches. Full characterization data is available to ensure a drop-in, no hassle tuning experience with your stock or standalone ECU. Other notable features include: • 100 percent precision dynamic flow-matched across a range of pulse widths • Unsurpassed balance across a broad range of flow rates • High impedance design • Ultra-compact EV14-style bodies • USCAR connectors • Drop-in, no hassle installation • 8- to 18-volt operating range • 100 psi maximum operating pressure • Full characterization data available for programming stock and/or standalone ECUs • Compatible with gasoline, methanol, and E85 fuels • Sold in matched sets only
Not Yet Reviewed
$574.99
—
$849.99
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$573.95
Restore proper engine function with Standard Motor TechSmart throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Standard Motor TechSmart throttle bodies offer durable, reliable performance that have made Standard Motor Products an industry leader for more than 95 years.
( 10 )
$531.99
Demon Carburetion Shadow Black Street Demon carburetors redefine the fuel/air mixer with an all-new black ceramic coating which acts as a protective barrier to heat and corrosion. They offer car enthusiasts a straightforward design to deliver stable idle, amazing throttle response, and smooth performance. With optimized calibration and a dual-mounting pattern, they are ready to run … right out of the box! The carburetors feature an integrated fuel bowl/main body design, with the gasket above fuel level, and no plugged passages--eliminating all potential leak paths. They include small 1 3/8 in. primary throttle bores, combined with proven triple-stack boosters, to facilitate crisp throttle response and drivability. Other specs and benefits: * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * 625 cfm airflow * Dual-mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 8 )
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
